REPAIRS TO FLOORING, CEILING, ROOF SHEET AND OTHER B/R WORKS IN OTM ACCN FOR APS AND NCC OTA AT AREA-II UNDER GE KAMPTEE.

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding and taking out rubbish off the premises complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) etc complete all as specified and directed.

M&L for coloured glazed ceramic tiles 300x450x6 to 7mm thick, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and directed.

M&L for non-skid ceramic tiles 7 to 8mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick screed bed of cement mortar (1:6) complete all as specified and directed.

All as per item No 4 above but as in skirting with 10mm backing in cement mortar 1:4 complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick screed bed of cement mortar (1:6) complete all as specified and directed.

All as per item No 6 above but dark shade vitrified tiles complete all as specified and directed.

All as per item No 6 above but as in skirting with 10mm backing in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for 75mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in hard standing and finished the surface even and smooth without using extra cement etc complete all as specified and directed.

M&L for chequered tiles 300 x 300 x 25mm thick, rubber finished, set jointed and pointed in neat cement slurry in floors with grey cement and pigment including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed.

M&L for 30mm thick sand filling under floor or in foundation including watering and consolidation etc complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block, rubber finished any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade etc complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block, rubber finished any shape and size confirming to IS 15658-2006 of 75 to 80mm thickness, M-40 Grade etc complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1(using 20mm graded stone aggregate) as in roof kerbs or mud stops, steps, rounded or chamfered on edges complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate), as in plinth protection and finishing surfaces even & smooth without using extra cement complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed base 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F pre-polished granite 18 to 20mm thick fixed on platform/ shelves over 20mm thick screed bed in cement mortar 1:6 including necessary moulding etc complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets of any thickness and wall paneling including cover fillets complete all as specified and directed.

M&L for GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600mm size fixed to wall with rawl plug and screw and hanged to roof with 4mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mm x 24mm x 0.30mm, cross tee shall be 28mm x 24mm x 0.30mm thick with black lining in mid portion and wall angle shall be 24mm x 24mm x 0.30mm thick complete all as specified and directed.

M&L for 4mm thick non asbestos, fibre cement building board of size 595 x 595mm size in ceiling fixed or laid/ inserted to timber/ GI/ aluminium framework with screws complete all as specified and directed.

S&F in repairs 4mm thick asbestos cement plain building boards, fixed to timber framework with screws in ceiling complete all as specified and directed.

Dismantling asbestos cement sheet (Corrugated, semi corrugated etc.) of any thickness including ridges, hips, valleys as in roof covering complete all as specified and directed.

Dismantling timber fillets, unframed under 40 Sq cm in section complete all as specified and directed.

S&F mild steel work such as roof trusses (framed), trussed, purlins and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat conforming to Fe-290, (Gde-165) etc complete all as specified and directed.

M&L for 6mm thick asbestos cement corrugated sheet, in roofs, wall etc and fixed with ‘L’ or 'J' hooks or cranked bolts or self taping screws with washers complete all as specified and directed.

M&L for 0.50mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering, fixed with and including self tapping screw all as per manufacturer's instructions complete all as specified and directed.

M&L for 0.50mm thick prepainted galvalume aluminium zinc coating G.I. based plain steel sheet of any colour having tensile strength of 550 Mpa as in ridges/ valley, fixed with and including self tapping screw all as per manufacturer's instructions complete all as specified and directed.

Taking down existing water proofing treatment including screed bed and disposal of rubbish outside of MD land and hacking for key, scrubbing down with water complete all as specified and directed.

M&L for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3 mm thick and weight not less than 3.50 kg/sq m over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP 100mm over laps on both sides and ends all as per manufacturer's instruction including 20mm thick screed bed in CM 1:6 and two coats of aluminium paint over membrane complete all as specified and directed.

Taking down cement or cement plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

All as per item No 35 above but half brick wall in CM 1:4 complete all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surfaces with CM (1:6) finished fair and even complete all as specified and directed.

M&L for preparing newly plastered walls surfaces and applying three coats white wash over wall surfaces complete all as specified and directed.

M&L for rendering 10mm thick on surfaces of ceiling in cement mortar (1:4) and finished fair and even complete all as specified and as directed.

M&L for preparing newly plastered walls surfaces and applying three coats white wash to ceiling complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying two coats of OBD over a coat of alkali resistant primer over chalk whiting etc complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described, exc 10cm width or girth & applying with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of RCC in any description and in any position not otherwise specifically provided for complete all as specifed and directed.

M&L for precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc) chullah hoods, chajjas, mangers, shelves and similar articles with plain faces and set in CM 1:6 (reinforcement measured and paid separately) complete all as specified and directed.

M&L for mild steel TMT bars 8mm dia, cut to length, bent to shape as required, including cranking, bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame complete all as specified and directed.

S&F in repairs vitreous china white squatting pan "Orissa Pattern" of size 580 x 440mm, with integrated foot rest (excluding flushing cistern, flush pipe etc) including making good to floor complete all as specified and directed.

S&F in repair white vitreous china wash down water closet pan (pedestal pattern) including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device including flush pipe and fixing bolts (excluding flushing cistern) etc complete all as specified and directed.

S&F in repair 10 litre capacity PVC valveless syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs wall mounted vitreous china wash down water closet 'P' trap round of size 620 x 360 x 780mm along with soft close seat cover and twin flush (Aquafier EWC P Trap) white colour with all fitting including jointing mild steel CP or aluminimised hinging device complete all as specified and directed. Make:- Prayag cat No 4125 or equivalent of Hindware/ Cera/ Jaquar.

S&F in repairs wash hand basin (flat back or angle back) of size 550 x 400mm white including, waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe complete all as specified and directed.

Supply only vitreous china pedestal for WHB, white colour as per site requirement and as directed by Engineer-in-Charge complete all as specified and directed.

S&F wash basin, oval type (56x41cm) complete all as specified and directed.

S&F in repair vitreous china urinal, half stall pattern, white (excluding flushing cistern, flush pipe and waste pipe) including urinal spreader, connections to flushing pipe complete all as specified and directed.

S&F in repairs bib tap 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handle screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15mm dia bib cock, long body with flange, brass chromium plated, fancy type, screwed for iron pipe or for brass ferrule including taking down existing one complete all as specified and directed. Make:- Prayag cat No 7808 or equivalent.

S&F in repairs 15mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore pillar cock, swan neck, brass CP, screwed for iron pipe including taking down existing one complete all as specified and directed. Make:- Prayag cat No 7814 or equivalent.

S&F in repairs chromium plated shower rose with or without swivel joints of 125mm dia including fixing to 15mm bore of pipe complete all as specified and directed.

S&F in repair stop valves/ angle cock, cast copper alloy, fancy type, chromium plated, screwed down , high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F two way bib cock (half turn type), brass CP, screwed down, high pressure, screwed both ends for iron pipe or for unions including taking down existing one complete all as specified and directed. Make:- Prayag Cat No-7612 or equivalent.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs 32mm bore of pipe low density polyethylene pipe (LDPE) of pressure rating 6kg/cm fixed complete all as specified and directed.

S&F in repairs flush pipe of polythene of low or high density 32mm PVC for low level flushing cistern complete all as specified and directed.

S&F in repairs urinal spreader of CP (Push type) any colour for fixing with 15mm dia pipe complete all as specified and directed.

Cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in cement mortar 1:3 complete all as specified and directed.

S&F in repair GI tubing 15mm bore, medium grade with all fittings and fixed to wall with clamps including taking up or down existing GI tubing complete all as specified and directed.

S&F in repair GI tubing 20mm bore, medium grade with all fittings and fixed to wall with clamps including taking up or down existing GI tubing complete all as specified and directed.

S&F in repair grating doom with waste hole 125mm dia of chromium plated complete all as specified and directed.

S&F in repairs waste fittings, 32/40mm brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair toilet paper holder complete all as specified and directed. Make:- Prayag Cat part No BA-48 or equivalent.

S&F in repair health faucet of 15mm bore brass cromium plated including PVC pipe to connection GI tubing of 15mm bore complete all as specified and directed.

S&F in repairs plastic water closet seat, back, closed pattern with flat bottom and cover, mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs soap dish, CP 125mm size fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs cabinet mirror 400x 500mm for bathrooms complete all as specified and directed. Make:- Prayag Cat Part No 551 or equivalent.

S&F in repair glass shelf 500x125mm with brackets complete all as specified and directed. Make:- Prayag Cat No BEA-45 or equivalent.

S&F in repair corner sheet glass shelf assemble consisting of 5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed. Make:- Prayag cat No BEA 44 or equivalent.

S&F in repair towel rail, brass chromium plated fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed. Make:- Prayag Cat No - BA 40 or equivalent.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.45,585.00]

Vishwakarma Engineering Works

M/S L M Chourasia

M/s B S Jain

DE PRETTY AND CO

M/s Jagdish Staioners and General Stores

khushal constructions

SHUB CONSTRUTION

M/s M.G. Hargunani

Meet Road Lines

Bidder Name

Meet Road Lines

DE PRETTY AND CO

Vishwakarma Engineering Works

SHUB CONSTRUTION

M/S L M Chourasia

M/s T.S.JOHAR

khushal constructions

M/s B S Jain

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani