GE U(N) 76 2022 23 PROVISION OF ADDITIONAL ALTERATION TO BLDG NO NP 04 A INCLUDING RAIN SUN SHED ALONG WITH RETAINING WALL NEAR BLDG NO NP 19 NP 21 P11 AND CERTAIN MINOR WORKS UNDER AGE BR II OF GE(N) UDHAMPUR

Amount

M&L for excavation over areas in any type of soil not exceeding 1.50m dep and getting out complete all as specified and directed by Engr in charge.

M&L for excavation in trenches n.exc 1.5m wide & n.exc 1.5m in depth getting out in any type soil complete all as specified and directed by Engr in charge.

M&L for excavation in post holes in any type of soil each n.exc 0.5cm getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm complete all as specified and directed by Engr in charge.

M&L for returning filling in including spreading levelling, watering and well ramming in layers not exc 25cm thick in any type of soil complete all as specified and directed by Engr in charge.

M&L for removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engr in charge.

M&L for hard core of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and directed by Engr in charge.

M&L for providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the presssed steel door frame/ hold fast complete all as specified and directed by Engr in charge.

M&L for plain cement concrete 1:4:8 type D-2 (40MM aggregate) as in foundation an mass concrete (for tank staging) complete all as specified and directed by Engr in charge.

M&L for precast cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates bonders for stone walling, set in cement mortar 1:6 with paling fair faces including clambers weathering complete all as specified and directed by Engr in charge.

M&L for cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in bed block/ coping bend or string etc, including use of necessary formwork complete all as specified and directed by Engr in charge.

M&L for cement concrete type B-2 (1:2:4) 40mm graded aggregate as in foundations and mass concrete complete all as specified and directed by Engr in charge.

S&F brick work with sub class 'B' bricks, straight or curved on plan exceeding 6metre mean radius, using old size brick, built in cement mortar 1:6, complete all as specified and directed by Engr in charge.

M&L for walling of random rubble stone masonary uncoursed well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified including flush pointing in the same mortar as the work proceeds complete all as specified and directed by Engr in charge.

M&L for extra over stone walling for hammer dressing to face stones and joints of random rubble walling uncoursed or brought upto courses with maximum depression on face from straight edge n.exc 40mm for lime or sand stone complete all as specified and directed by Engr in charge.

M&L for boulders filling, dry hand packed tightly at back of reatining wall (boulders of 150mm size and over) all as specified and directed by Engr in charge.

Supply & fixing PVC (SWR), pipe 110mm dia for weep holes at locations complete all as specified and directed by Engr in charge.

M&L for taking down cement plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr in charge.

M&L for 15mm thick rendering on fair faces of brick/ concrete surface in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed by Engr in charge.

M&L for rendering 10mm thick on fair face of brick work or concrete surfaces CM (1:6) complete all as specified and directed by Engr in charge.

M&L for 5mm thick rendering on fair faces of concrete surfaces, finished even and smooth as in ceiling in cement mortar 1:4 complete all as specified .

S&F steel water tubing medium grade 15mm bore galvanised with all fittings and fixed to wall or ceiling complete all as specified and directed by Engr in charge.

S&F steel water tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors of 20mm bore complete all as specified and directed.

S&F ball brass valves 20mm, high pressure with polythene float & fly-nut complete, screwed for iron pipe or brass ferrule & fixed complete all as specified and directed by Engr in charge.

S&F rotational moulded polythene water storage tanks (crystal vertical with closed top three layered white in colour) hoisted and fixed in position all as specified in SSR Part I, capacity of water tank 1000ltr complete all as specified.

S&F 15mm bib taps, cast copper alloy, fency type chromium plated, with crutch or butterfly handle, screwd down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F stop/ angle valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe 15mm complete all as specified.

S&F gun metal, globe or gate valves 20mm dia, with iron wheel head, screwed both ends for iron pipe & fixed complete all as specified.

M&L for demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground) complete all as specified .

M&L for preparing surfaces plastered or unplastered undecorated surfaces applying two coat of white wash on wall complete all as specified.

M&L for providing 50mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection even and smooth with using extra cement complete all as specified .

M&L for dismantling floor hearth or wall tilling including cement mortar bedding removing serviceable tiles to store and rubbish off the premises, complete all as specified .

M&L for 25mm thick cement concrte 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and rough to receive tiles as in floors complete all as specified .

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including laying over 20mm thick screed in cement mortar 1:4 complete all as specified and directed.

M&L for kota stone slab 20-25mm thick in riser of steps, skirting dado and pillar jointed with ditto as pr item above & including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for first quality, glazed ceramic, straight cut/ edge/ joint free, coloured 7-9mm thick tiles of size 300x450mm on verticl surfaces such as dados etc over & including 10mm thick cement mortar 1:4 screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles including taking down existing treatment complete all as specified . Note :- Tiles to be fixed in concept colour and shade will be approved by Engr in charge.

M&L for non-skid coloured ceramic tiles 7-8mm thick (square/ rectangular) area of each tiles exceeding 0.11sqm but n.exceeding 0.18sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface laid over & incl 15mm thick screed bed in CM 1:4 complete all as specified .

M&L for dismantling asbestos cement (corrugated, semicorrugated etc) sheets in roof caverings complete all as specified and directed by Engr in charge.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/ cladding of wall, fixed with self tapping screws complete all as specified and directed by Engr in charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr in charge.

M&L for dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/ slabs/ blankets, any thickness, including over fillets, all as specified.

S&F non asbestos fibre cement board ceiling 4mm, thick in 600x00mm panel (Make-everest) designed ceiling conforming to IS-14862 type B category three incl GI framework, hold fast, suspenders complete all as specified and directed by Engr in charge.

S&F powder coated aluminium door/ windows air tight anodized frame made of size 100x45mm of sheet thickness 1.5mm with one or more rebate including jointing, cleats hinhes etc for fixing anodized aluminium door shutter fully paneled ) two Nos of panel on each shutter) with 5.5mm thick tinted plain glass shutter rail made of 80x45mm of sheet thickness 1.5mm (top, bottom middle and side rail). Single/ double leaf side hung type including necessary joint cleats, anodized aluminium fitting/ aluminium fitting such as aluminium butt hinges 100mm long 4 NOs on each shutter, alumnium anodized tower bolt 200mm long 3 NOs for each door, aluminium anodized handle 150mm 2 NOs 'D' type for each. Shutter & locking 6lever of make Harrison one on each foor, bottom door spring one on each shuter including hydrullic door closer. All door fitting except cleat shall be 1st marked (size of each door shall be as per site requirement.

S&F factory made steel windows (Box type hinge) without glazing bars, dovetailed or welded including hinges, steel handle, steel peg stays etc including one shop coat of red oxide zinc chrome primer, complete all as specified and shown in drawings complete all as specified and directed by Engr in charge.

S&F factory made steel windows (Box type hinge) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer complete all as specified and shown in drawingscomplete all as specified and directed by Engr in charge.

M&L fo framed work such as grills, gratings etc, with ends of bars shouldered and/ or riveted, or forget into spikes ; framed guard bars ; barred iron doors ; ladders ; framed balusters ; walk ways ; railings ; framework of water tanks and similar works conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engr in charge.

M&L for pressed steel frame for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc . Complete, of frame size 125x60mm, complete all as specified and directed by Engr in charge.

M&L for 35mm thick factory made 2nd class hard wood rail and style, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercil ply or 12mm venered partical board with commerial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I) , klin seasoned and chemically pressure treated complete all as specified and directed by Engr in charge.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters open rebated & prepare to receive glass, gauge etc (without sash bars/ edges of framing plain chamfered or rounded, fitted with cut and mitred beds for securing glass etc) size of members of shutters as specified in SSR Part-I Section-8 clause 8.2 (A). complete all as specified and directed by Engr in charge.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of apertuer 1.18mm and dixed with tinted tacks, or galvanised wire staples complete all as specified and directed by Engr in charge.

M&L for preparation of new wooden surfaces exceeding 10cms width or girth and applying two coats of synthtic enamel paint over one coat of pink primer complete all as specified .

M&L for preparatiob of new iron surfaces exceding 10cms width or girth and appyling two coats of synthetic enamel pint over one coat of pink primer complete all as specified .

M&L for taking down shutter without taking out chowkhats exceeding 1.5sqm but not exceeding 4sqm complete all as specified and directed.

M&L for taking down chowkhats without taking off shutters from the frames ( with shutters) area n.exc 1.5sqm each) complete all as specified and directed by Engr in charge.

M&L for preparation of new plastered surfaces of wall by applying 1 to 1.2mm thick Atlek/ Birla white putty to obtain smooth/ even finish using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint complete all as specified .

M&L for two coat of cement base paint over a coat of alkali resistant primer paint including preparation of newly plastered surfaces of wall upto 12-15m height from ground leve including scaffolding, cleaining and curing etc complete all as directed by Engr in charge.

S&F mild stel cold rolled butt hinges medium weight 75mm long complete all as specified .

S&F 150mm long aluminium, anodised, barrel lower bolts of extruded section and fixed complete all as specified and directed by Engr in charge.

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr in charge.

M&L for providing chequered cement concrete tiles 25cm x 25cm x 22mm thick tiles set, jointed and pointed in neat cement slurry in floors with grey cement ant pigmene laid over & incl 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for PCC 75mm thick 1:4:8 type D2 using 40mm graded stone aggregates as in ub base flooring complete all as specified and directed by Engr in charge.

S&F joist, channel, angle, or tee sections, fixed independently (Fe-290 (Gdr E-165) without connecting plates etc. (cut to ordinary lengths i.e, within 20mm of the length indicated) complete all as specified.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) incl distance pieces, cleats (Fe 410-W(Gde E-250) qulity B. complete all as specified and directed by Engr in charge.

S&F framed work as in roof tubular trusses, main rafters, purlins where connected with cleat or other connecting plates complete all as specified and directed by Engr in charge.

S&F plates sq cutor nothced without any attachment Fe-410 (Gde-250 quality A)complete all as specified and directed by Engr in charge.

M&L for point wiring with PVC insulated unsheathed, FRLS 1100 volts grade stranded copper conductor cable single core 2.5 Sqmm point for one geyser controlled by one way switch, and wire to be drawn in and including rigid pvc concealed conduit of dia not less tham 25 mm of 2mm wall thickness complete with all accessories including GI anealed metal box 1.2 mm thick switch board of suitable size be fixed flush wall , with 3 mm thick ebonite sheet cover and necessary screws, cap washers etc. or to be fixed on wall respectively as directed by EIC and providing earth continuity wire using PVC insulated, un sheathed single core stranded copper conductor FRLS cable of size 2.5 Sqmm to controlled the 3 pin 5 / 15 Amps socket outlet on independent board.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece complete all as specified and directed by Engr in charge.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed by Engr in charge.

M & L for replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt capacity complete all as specified and directed by Engr in charge.

M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC Concealed Conduit as per site requirement including taking down old us submain wiringand direction by EIC, all accessories complete all as specified and directed.

S & F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 8 ways complete all as specified and directed by Engr in charge.

Taking down carefully point wiring copper/aluminium (light, fan, socket, and power) complete (fittings such as switches ceiling roses, pendent regtulators sockets etc tobe measured and paid for separately removing materials to store for keeping of safe custody and making good the disturbed surfaces complete all as specified and as directed.

M&L for point wring for one light/ceiling fan controlled by one switch with 1.5 sqmm (nominal area) PVC insulated and PVC unsheathed multi stranded copper conductor cable FRLS in and including concealed PVC conduit 20 mm dia medium duty ISI marked, including sutiable new steel sunken boxes,modular frame and cover plate for fixing of modular switches as per required point in that board, flush to surface for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 sqmm copper conductor cable FRLS connected to common earth dooly complete including cutting,chasing the surface and then making good the same in CM 1:3 complete all as specified and directed. Make of cable :- Anchor/Havells/ fiinolex and Make of pipe :- Kalinga/Polycab/Havells (Note : Switches, Sockets etc shall be measured and paid for separately under appropriate items One light point /bell point controlled by one switch

All as per srl item no 72 above but for one 3/5 pin socket outlet, 5 Amp independent

All as per srl item no 72 above but for one socket outlet 3 Pin, 5 Amps, SP on same board.

M&L for point wring for power point controlled by one switch with 2.5 sqmm (nominal area) PVC insulated and PVC unsheathed multi stranded copper conductor cable FRLSH in and including concealed PVC conduit 20 mm dia medium duty ISI marked, including sutiable new steel sunken boxes,modular frame and cover plate for fixing of modular switches as per required point in that board, flush to surface for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 2.5 sqmm copper conductor cable FRLSH connected to common earth dooly complete including cutting,chasing the surface and then making good the same in CM 1:3 complete all as specified and directed. (Note : Switches, Sockets etc shall be measured and paid for separately under appropriate items

All as per item No 72 above but for one light point controlled by two 2-way switches, with cables 1.5 sq. mm size

Supply and fixing in replacement modular switch single pole one way 10Amps 1 module complete all as specified and directed

Supply and fixing in replacement modular switch single pole one way 16 Amps 1 module complete all as specified and directed

S&F moduler switch Piano flush type single pole 5 Amps two way, all as specified and directed .

Supply and fixing in replacement modular socket 6 amp-2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing in replacement modular Bell push 6 amp 01 module complete all as specified and directed.

Supply and fixing in replacement modular socket 6 /16 Amps 2/3 pin flush type complete all as specified and directed by Engr in charge.

Supply and fixing in replacement of ceiling rose.3 face/PVC/polycarbonate,isolated body all as specified and directed.

Supply and fixing in replacement modular electronic fan regulator, step type, two module 60 watt 230 volt and making all necessary connections complete all as specified and directed.

S&F Bell ding dong AC 23Volts single pole all as specified and as directed by Engineer in charge

S&F LED light fitting PLUTO NEO PANEL 2'x2' PLR 36 watt LED 857S environmental friendly , new generation , aesthetically designed ,ultra modern recess mounting luminaire with high brightness SMD LEDs as light source suitable for armstrong /grid /ceiling all as specified and directed.

S&F in replacement Slim linear LED lighting fixture 20 watt LED batten, with full base of extruded aluminium section acting as a heat sink with closed back, isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete all as per the direction of Engr-in-Charge. Make -Make model of Havells cat No LHEXBYPNIN1W020 or equilent to CG/ syska CAT NO : SSK-SQ2001 RA 1801

S&F in replacement E-Lite LED Curve lighting fixture 10/12 watt LED batten, with full base of extruded polycarbonate body environmental friendly, energy efficient ready to use pack with isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete all as per the direction of Engr-in-Charge. Make -Havells as per ordering code LHEXBYPNIN1W010, Syska cat No SSK-SQ1201or equivalent model of Bajaj/Philips/Surya/CG.

S&F in replacement E-Lite LED Curve lighting fixture 05 watt LED batten, with full base of extruded polycarbonate body environmental friendly, energy efficient ready to use pack with isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete all as per the direction of Engr-in-Charge. Make -Havells as per ordering code LHEXBYPNIN1W005, Syska cat No SSK-SQ0401 or equivalent model of Bajaj/Philips/Surya/CG.

S&F in replacement security (street) light fitting 35 watt, new generation energy saving & environmental friendly long life versatile pressure die cost aluminium IP 66 with acylic, powder coated, pressure die cast aluminium compact high power LED street light with heat resistant toughed glass, corrosion resistant, isolated driver, including provision of GI tubing bracket of suitable size and fixed on wall including clamps, nut, bolts and washer for fixing of security (street) light complete all as per direction of Engr-in-Charge. Make:SYSKA Cat no SSK-ST-25W(SN) or equivalent in CG cat No : LSTS-25-CDL

M&L in replacement of sub main wiring with copper conductor cable (2 runs of cable) multistaranded 64Sqmm PVC FRLS ISI marked with all insulated unsheathed in and including PVC concealed conduit 25mm dia medium grade fittings including 4.00 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire connected to common earth and earth dolly complete all as specified and directed by Engr in charge.

M&L for sub main wiring with 2 single core PVC insulated FRLS unsheathed stranded copper conductor cable of Size 4 Sqmm with and including PVC concealed conduit "ISI" marked with all fittings and accessories and one single core PVC insulated FRLS single core stranded copper conductor cable 4.0 sqmm as contineous earth wire and connected to earth dolly complete all as specified and directed by Engr in charge.

Material and Labour for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below Normal ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised earth lead wire 4.0mm dia by means of GI nuts, bolts and washers of galvanised iron or steel all as shown in electrical plate no.5 connecting to earth test point all as specified or indicated including testing on complition with following:- (a) Test point GI wire 4mm dia . (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover. (d) Angle iron frame made of 40x40x4 mm angle iron for 30x30 mm PCC pit for holding the pit cover.

M & L for replacement of DB0Xx MCB protected socket with sheet steel enclosure complete WITH MCB SP 25Amp of Make Havells Cat No DHDMCSN0251025 equivalent to Havells/ Schnieder complete all as specified and directed by Engr in charge.

Supply and fixing 4mm dia GI wire as earth continuty conductor or main earth strip fix to wall on batten or recess or chess or burrid in ground or any other indicated situation for loop earthing etc complete all as specified and directed by Engr in charge.

S & F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 12 ways.Make:- . Make: Legrand (Ekinox3) cat no- 507612 Ekinoxe/ schneider(Acti-9)/ Siemens(Betagard-8GB 32).

S&F 'C' series SPN MCB 40 to 63Amps 240V ,50Hz,10kA lighting and other domestic loads incl all termnials, fitting etc. Make: Legrand (DX-3) cat no- 408637, 408639/ schneider(Acti-9)/ Siemens(Betagard- 5SL4).

S&F 'C' series SP MCB 06 to 32 Amps 240V ,50Hz,10kA suitable for lighting and other domestic loads incl all termnials, fitting etc. Make: Legrand (DX-3) cat no- 408587,90,92,93,94,95/ schneider(Acti-9)/ Siemens(Betagard- 5SL4).

S&F sheet metal TPN DBs - DPX3 160 MCCB DBs 04 way (DPX3 160+ 12) with metal door 415 volts grade IP 43 Protection Grade fixed flush to wall complete including connections should be provide with necessary reducer lugs all as specified and directed by Engr-in-charge.Make Legrand Cat part No : 5077 50 or equivalent to Shnieder

S&F DPX3 thermal magnetic MCCB 3 pole 100 Amps 415 Volts 16 ka INCLUDING MAKING NECESSARY ARRANGEMENT all as specified and directed by engineer in charge for MCCB DB.Make Legrand, Cat part No : 4200 05 or equivalent to Shnieder

M&L for taking down ceiling fan sealing cable end etc and shifting to store complete and rehanging the same after overhauling and painting with white synthetic enamel paint(two coat) with the help of spray gun and connecting with three core flexible copper conductor cable 0.75 sq mm complete all as directed by Engr-in-Charge.

M&L for replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt capacity complete all as specified and directed by Engr in charge.

Supply and fixing exhaust fans steel body,AC ingle phasee 230 volts of size 300 mm sweep with blades and frame and louver complete all as specified and directed by Engr in charge.

Supply and lay in replacement XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 25 sq mm 4 core in trenches/floor/pole/GI pipe complete including cutting/chasing to any surface and making good to the disturbed surface to match the existing complete all as specified and directed by Engr in charge.

M&L for dry sand cushioning to under ground cables provided with a layer of sand 8 cm deep before laying the cable, 15 cm depth after laying cable & stretching the cable all as specified and directed.

Supply and lay brick class ‘B’ covering as mechanical protection to cable with well burnt complete all as specified and directed by Engr in charge.

M&L GI tubing light grade with all fitting and fixed in wall and floor or fixed to pole of size 40mm dia complete all as specified and directed by Engr in charge.

Supply and fix on load change over switch 4 pole 415 V in sheet metal enclosure 4 pole of capacity 100 Amp complete all as specified and directed by Engr in charge..Make : Havells Cat No: IHBFFE0100 OR Equivallent to other makes of L&T/C&S

M/S BHARAT LIGHT ELECRIC.CO

KUMAR CONSTRUCTION CO

VIRINDER SINGH

M/s Ess Aar Enterprises

M/S SATINDER PAL & CO.