PROVISION OF DRAINAGE,PAVEMENT AT WT AREA AT MLIRC AND PROVN OF HARD STANDING NEAR BLGD NO 3 AT CDO WING OF JUNIOR LEADERS WING, THE INFANTRY SCHOOL, BELAGAVI UNDER GE BELGAUM.

Amount

Surface excavation not exceeding 30 cm deep and averagng 15 cm deep and getting out Soft/loose soil, etc complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.

Material and labour fo Hardcore of gauge not exceeding 63 mm with broken stone or boulders deposited, spread and levelled in layers not exceeding15 cm thick, watered and rammed to a true surface, etc complete all as specified and as directed.

Material and labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, etc complete all as specified and as directed.

Material and labour for Providing plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub-base of floor, 100mm thick including necessary steel form work complete all as specified and as directed.

Material and labour for Providing PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in sub base 50 mm thick including necessary steel form work complete all as specified and as directed.

Material and labour for Forming 12mm thick expansion joints filled with pre-formed bituminuous filler and top 30mm primed and sealed with ceiling compound grade 'A' for 100mm thick concrete floor etc complete all as specifed and as directed.

Material and labour for Providing Plain Cement Concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, coping, kneelers, apex stones etc water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary steel form work complete all as specified and as directed.

Material and labour for Rubber moulded reflective type Chequered cement concrete tiles 300x300x25 mm etc. set and jointed and pointed in neat cement slurry in floor with white cement and pigment, including 15 mm thick screed bed or bedding layers in cement mortar 1:6 complete all as specified and as directed. .

Material and labour for Precast cement concret block masonary 1:3:6 type C1 using 20mm graded stone agg with solid blocks, exc 10cm in width and setting in CM 1:6 complete all as specified and as directed.

Material and labour for 15mm thick rendering on fair faces of concrete surfaces in cm 1:4 and finish the surfaces fair and even without using extra cement complete all as specified and as directed.

Material and labour for Preparing newly plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resistent primer complete all as specified and as directed.

Excavation in trenches for foundation n.exc 1.5 meter wide and n exc. 1.5 meter depth and not exc. 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches for foundation n.exc 1.5 meter wide and n exc. 1.5 meter depth and not exc. 10 sqm on plan and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in approved earth including spreading, levelling watering and well ramming in layers n.exc 25cm in foundation in soft/loose soil complete all as specified and as directed.

Material and labour for Plain cement concrete 1:4:8 type D2(Using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B2 (40mm grade stone agg) as in cement concrete in surface channel and drain complete all as specified and as directed.

Material and labour for Providing cement concrete 1:3:6 type C1 (Using 20mm graded aggregate in coping/bed plates etc including necessary steel form work complete all as specified and as directed

Material and labour for Precast reinforced cement concrete 1:2:4 (type B1) as in cover slab and set in cement morter (1:6),etc complete all as specified and as directed

Extra for forming fair finished drains or channels 60cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Material and labour for 10mm thick rendering on fair faces of concrete surfaces in cm 1:4 and finish the surfaces fair and even without extra cement complete all as specified and as directed.

Supply and fix Mild steel TMT bar 10mm dia and over, cut to length bent to shape reqd incl cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Description all as item no:22 here in before but 5 to 10 mm dia as in stirrups / spacer etc complete all as specified and as directed..

Material and labour for RCC 1:2:4 type B1 using 20mm graded stone aggregate)as in slab supported on walls, , beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and labour for Use and waste of steel form work for rough finished surface to soffit of suspended slabs such as roof slabs, floor slabs, landing and similar work n.exc 200mm thick (horizontal or sloping) complete all as specified and as directed.

Material and labour for 600mm bore RCC pipes class NP-2 ( ISI MARKED) laid in trenches and jointed in cement mortar 1:3 including concrete Bed with Cement Concrete 1:3:6 type C-2 to drain pipes including packing under and haunching against the sides of pipes complete with collar complete all as specified and as directed.

Material and labour for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth in parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra with sand complete all as specified and as directed

ASHOK M RAJGOLKAR

M/s S N Atiwadkar

M/s. KIRAN M CHOUGULE

M/s.Y.N.PATIL

SHRI.H.R.PATIL

M/s B C CHOUGULE

ASHIRWAD ELECTRICALS

M/S MAHADEV M PATIL

M/S JAYDEEP CONSTRUCTION