SPECIAL REPAIR TO BLDG NO P-166 OF HQ PUPSA OFFRS MESS AND PROVN OF TOILET BLOCK CONSISTING OF 12 X TOILET SEATS AND 04 X URINAL POINTS ALONG OF 947 LT AD REGT (COMP) WKSP UNDER GE (NORTH) MEERUT CANTT

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc complete all as specified & directed.

M&L brick work with sub class fly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified & directed.

M&L brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified & directed. Note :- Old serviceable bricks retrived from demolition shall be re-used under this item.

Demolition of cement concrete of ground floor n exc 15 cm in depth in any position nototherwise specifically provided for complete all as specified & directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring complete all as specified & directed.

M&L for Screed bed or bedding layer of mortar 20 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:4 for fixing of wall tiles/marble dados finishes complete all as specified and directed.

M&L for ultra charged vitrified tiles 15mm thick (or thickness as specified by manufacture), (square/ rectangular) polished, area of each tiles exceeding 0.64 Sqm but not exceeding 1.2 Sqm (as approved by GE) in flooring set and jointed in premium epoxy grout (Kajaria KE-100 or equivalent) to match the colour of tiles and including bedding of average thickness 6mm thick premium tile adhesive kajaria CX-1 or equivalent for laying of tiles on brick/concrete surface complete all as specified and directed. Note:- Rates Inclusive of Premium epoxy grout, premium tile adhesive and shall not be paid separately.

All as per item No 9.00 above but as in skirting complete all as specified and directed.

M&L for Ceramic glazed wall tiles including designer/digital/HD /Polished tiles (thickness as specified by the manufacturer), area of each tiles exceeding 0.18 Sqm but not exceeding 0.72 Sqm in flooring set and jointed in premium epoxy grout (Kajaria KE-100 or equivalent) to match the colour of tiles and including laying over cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness bedding on brick/concrete surfaces complete all as specified and directed. Note:- Rates Inclusive of Premium epoxy grout, premium tile adhesive and shall not be paid separately.

M&L Treatment of soil with ATT under existing floors/walls using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors/wall complete all as specified & directed.

S&F premium range anti skid matt finish premium range vitrified tiles (as approved by GE) area of each tiles exceeding 0.16 Sqm but not exceeding 0.36 Sqm (thickness as specified by the manufacturer) in flooring set and jointed in premium epoxy grout (Kajaria KE-100 or equivalent) to match the colour of tiles and including laying over cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness bedding on brick/concrete surfaces complete all as specified and directed. Note :- Rates Inclusive of Premium epoxy grout, premium tile adhesive and shall not be paid separately.

M&L for 16-18mm thick black granite stone slab machine cut in cooking platform, jambs, pillars, windows cills, making border/design for floors etc and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing and including Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortar etc. complete all as specified & directed.

S & F bold metallic stainless steel letters or alphabetes made out of 22 Guage thick Stainless steel plain sheet of grade 304 plain sheet of suitable with not less than 50mm and depth/thick not less than 20mm based on height of letter (hollow section made to shape by using computerised cutting), height of letter not less than 15 inch in Hindi and English languages and fixed on granite/tiled/stone wall cladding finished wall elevated from surface complete all as specified and as directed.

S&F wall to wall mirror of 5.5mm - 6.0mm thick fixed over plywood of required thickness complete with hard board ground fixing with rawl plug and fasteners of approved design with CP brass screw and washers i/c rubber wood moulded beading all round mirror etc. complete and as per the direction of Engineer-in- charge.

S & F in 12mm thick toughned glass as in fixed glass, hinged doors, partitions, automatic doors, windows and similar work including cutting to shape, drilling holes, including single leg spider, ceiling/bottom to glass connector and pivots, glass to glass connector, stabilizer rod, floor clamp, plastic parts, wall to glass hinge, knob, roller, floorspring (With S.S. Cover), C Shape Square SS Handle - 450mm etc. all fittings for doors/partitions (including SS fittings) required to make functional all as specified and directed

S & F 8-10mm thick (Clear/ Frosted Acid wash) toughened Polish glass (meeting IS 2553 part 1 and EN-12150-1:2015) as in Frameless glass shower cubicles/partitions with Wall to wall enclosure with one end fixed glass and openable hinged/sliding door fixed with wall Coloured/transparent finished Edges (As approved by GE) including Brass hardware, door stoppers, wall to glass hinge, glass to glass hinge, wall to glass connector, floor clamp, stabilizer rod, knob, plastic parts, roller, floor guide, handles, wall brackets, floor bracket, top/bottom sliding track, L-clamps, profile strips with chrome finish and mirror finish stabilizer bar & rust Free Screws to make functional complete all as specified and directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified & directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqm each complete all as specified & directed.

M&L for 1st class teak hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed including holdfast as approved by GE complete all as specified and directed.

M&L for 30 mm thick 1st class teak hard wood heritage wood work shutter designer pattern (panelled/ plain) design pattern as approved by GE) including fixing to frame complete all as specified and directed.

S & F 30mm thick 1st class teak hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified & directed.

S & F 30mm thick 1st class teak hard wood windows, ventilators, etc. to be provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b), open rebated and prepared to receive glass, gauze, etc. (without sash bars), divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specified & directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

M&L 2nd class hardwood designer fillets, square, rectangular or triangular in section, sectional area exceeding 13 Sq.cm and not exceeding 25 Sq.cm clean sawn, secured with screw complete all as specified & directed.

M&L 2nd class hardwood designer fillets, square, rectangular or triangular in section, sectional area exceeding 6 and not exceeding 13 Sq.cm clean sawn, secured with screw complete all as specified & directed.

M&L High gloss melamine polishing on wood work (One or more Coat) over a under Coat of French Spirit polishing (two or more coat) new work including a coat of wood filler complete as per direction of Engineer-in-charge.

S&F Brass 300mm sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified & directed.

S&F brass barrel tower bolt with bright bolt 200 mm long. complete all as specified & directed.

S&F 150mm Extruded brass handles, fabricated type polished complete all as specified & directed.

S&F 100 mm butt hinges, medium weight Brass complete all as specified & directed.

M&L for fabrication and fixing BWP (Boiling water Proof) solid block Board 19 mm thick conforming to IS 1659- 2004 to be used ,inside depth not less than 0.50 metre. All the exposed surface which are or can be visible to be covered with 1.0 mm th. Sunmica of Approved colour, shade and finish. The surface which will come in contact with wall/ masonary/tiles etc shall be premiered with Appropriate Wood primer mixing Approved Antitermite chemical and pasting 250-micron water proof Plastic Sheet with appropriate adhesive. All the Pastings to be done with water resistant Adhesive. Any Butt joint should be strengthen with Screw and Fissures inserted with appropriate pasting compound. Shutters of storage unit to be formed out of 19 mm thick BWP ply and faced with 1.0 mm thick Sunmica. Provide shelf etc. made of 19 mm thick BWP B.B., polished to engineer-in-charge's approval. Complete Including with all necessary fittings like knobs, magnet catcher, running track for sliding, hinges any type, ball catchers, SS tower bolts 150mm , locks,SS handles 300mm long, adjustable shelves etc. as per directions of Engineer Incharge. Inside surfaces to be finished with 1.00 mm thick Sunmica and outer exposed surface with 1.00 mm th. Sunmica. Cupboard depth of 600- 750 mm. (Note: 1.Rates inclusive of solid block board, adhesives, fittings/fixtures, Sunmica and plastic sheet etc and shall not be paid separately. 2.Front facing area shall only be considered for payment ) including taking down old boarding any type.

M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290 Gde E-165 complete all as specified & directed.

M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel (by spraying) over one coat of primer complete all as specified & directed.

S&F Mortise lock with set with Pair of 8100 Mortise Lever Handles, 271a lock with 55mm backset and 60mm EPC with one side thumb turn and one side key, Fire resistance BSEN 1634:1:2000 Certified Satin Finish Mortise Lock body approximate size of back set 45 mm X 85 mm, with 52 mm Lock and 26 mm brass latch , Stainless steel main & Strike plate & including back to back fixing feature suitable for minimum door thickness 30 mm Single door shutter with necessary fixings, screw as required to complete the work complete all as specified & directed.

S&F, in repair, aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified & directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified & directed.

S&F in repair 5mm thick hollow PVC Sheet wall Panelling (sand wiched between the longitudinal grid in PVC Sheet) any pattern fixing at site with PVC beading/fillet complete all as specified & directed.

M&L for stone slab 30mm thick stone dressed true and square, in one length not less than 60cm and n. exc 120cm in copings, window cills, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified and directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

M & L 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M&L Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified & directed.

M & L for applying 15 mm thick rendering in CM 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 200ml per cement bag or as per manufacturer instructions, complete all as specified and directed : Note:- Water proofing compound shall be measured and paid seprately.

Preparation of old surface after complete removal of existing treatment by mechanical complete all as specified and directed

M&L for preparation of old/new surfaces of ceiling and applying Two coat of distemper oil emulsion incl priming the surface and incl 1 coat ceiling birla white putty complete all as specified & directed.

M&L for applying 2mm thick wall care putty making smooth surface complete all as specified and directed.

Material & Labour for applying Two coats of 100% Premium acrylic plastic emulsion paint (royal shine) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of interior grade primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting complete all as specified & directed.

Material & labour for taking down old existing treatment any type & cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade hot blown bitumen, over it laid with 3mm thick APP modified polymeric water proofing membrane reinforced with non-woven polyester fabric unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions, complete all as specified & directed.

Taking up or down steel tubing and connection 20 mm bore pipe and removing from site complete all as specified & directed.

All as per Sl Item No.51 here-in-before but 25 mm bore pipe complete all as specified & directed.

Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified & directed.

Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified & directed.

S&F triple layer white color 1000 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and including Dismantling OH water tank of capacity exc 500 ltr but not exceeding 1000 ltr and removing from site complete all as specified & directed.

S&F 20 mm dia PTMT ball valves with brass rod, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repair bib taps brass chromium plated 15 mm bore size with flange screwed down screwed for 20 mm dia pipe or for brass ferrule. Make: Jaquar OPP-CHR-15037PM or equivalent as approved by GE.

S&F in repair 15 mm dia angle cock cast copper alloy chromium plated with flange screwed down high pressure with crutch or butterfly handle, flench screwed both ends for 20mm dia pipe or for union complete all as specified & directed. Make :- Jaquar ARI-CHR-39053 or equivalent as approved by GE.

S&F in repair Single Piece WC With PP Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 360x640x685 mm including replacement of S Trap- 110 mm complete all as specified and directed by Engineer-in-Charge.(as approved by GE)

S&F in repair vitreous china thin Rim Table Top Basin (colour as approved by GE), Size: 530x420x140 mm, Shape - Rectangular including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling, waste pipe, bottle trap and fixing to vanity unit complete all as specified & directed.

S&F at site and on position floor mounted vanity counter made of Superior Material Quality with HDHMR (High Density High Moisture Resistant) of size 770x451x680mm/800x470x680mm having vitreous china basin on top with SS cabinet & side cabinet and soft close door & drawers of approved pattern and design with necessary fixing arrangment complete as per direction of Engr-in-charge. Note:- wash basin to be paid separately.

S&F in repair ,PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified & directed.

S&F in repair ,PVC(SWR) gully trap, 125/110mm bore, plain with grating including jointing with solvent cement complete all as specified & directed.

S&F 600mm Long Braided Hose with M10 x 1 Nipple, 15mm Nuts, O-Ring & Rubber Washers complete all as specified & directed.

S&F Maze Overhead Shower 300 x 300mm Square Shape Single Flow Body & Face plate Stainless Steel with Chrome Finish with Rubit Cleaning System with CP shower arm 24inches. Make : Jaquar Cat Part No OHS-CHR-1639 or equivalent approved by GE.

S&F in repair CP Soap Dish Holder complete all as specified & directed.

S &F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified & directed.

Supply and fix in repair 75mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste complete all as specified & directed.

Supply and fix in repair 110mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste and rain water pipes complete all as specified & directed.

Supply and fix PVC (SWR) bends 75mm bore, any radius complete all as specified & directed.

Supply and fix PVC (SWR) bends 110 mm bore, any radius complete all as specified & directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified & directed.

S&F 110mm PVC (SWR) 'S' trap complete all as specified & directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia.fixed in repair complete all as specified & directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 25 mm dia.fixed in repair complete all as specified & directed.

S&F 550mm X 750mm LED Lighting frameless, round/rectangle of required size, Anti-Fog, wall mounted backlit mirror. Thickness 5mm, round Dimmable Touch button 6000k (Cold White) SGS approved environmental protection coper free mirror all complete all as specified & directed.

S&F in repair 15 mm dia brass chromium plated Central Hole Basin Mixer with Regular Spout with Popup Waste System with 450mm Long Braided Hoses fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstan head screwed for 15mm dia pipe fixed in repair complete all as specified & directed.

S&F in repair 15mm dia chromium plated fancy type Bath & Shower Mixer including Telephone Shower Crutch & Shower Kit (9537N & 571), Wall Mounted for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed.

S&F in repair hand Shower (Health Faucet) with 1 meter Long Easy Flex Tube in Chrome Finish & wall Hook complete all as specified & directed.

S&F in repair 15 mm dia Concealed stop cock chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union complete all as specified & directed.

S&f in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf chromium plated bracket guard and railing 60cm long complete all as specified & directed.

S&F Corner Glass Shelf (with Bracket) complete all as specified & directed.

S&F (in repair) chromium plated towel rail 450 mm long as approved quality complete all as specified and directed.

S&F in repair SS fancy type Brackets of suitable size to fix 25mm dia SS decorated curtian rod with end knobs complete all as specified and directed.(Note: 02No Bracket and 02No End knobs to be considered as one set for measurement purpose) complete all as specified & directed.

S & F 25mm dia Stainless steel decorated curtain rod with ring complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified & directed.

M & L repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) (Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account)

S&F in repair 12.5 mm thick tapered edge gypsum moisture resistant board (seamless type) conforming to IS: 2095- Part I. false ceiling at all heights including providing and fixing of framework made of special sections power pressed from MS sheets and galvanized with zinc coating of 120g per sqm ( both sides inclusive) as per IS 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts and bolt of required size and other end of angle hanger fixed with intermediate GI channels 45x15x0.9mm running at the spacing of 1200mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm at 450 mm centre to centre shall be fixed in a direction perpendicular to GI intermediate channel with connecting clips made out of 2.64mm dia x 230 mm long GI wire at every junction including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition with help of rawl plugs at 450 mm centre with 25 mm long dry wall screws at the rate of 230 mm interval including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screw of size 3.5x25 mm at 230 c/c including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compounds in three layers covering up to 150 mm on both sides of joints and including two course of primer & Acryllic Emulsion paint suitable for board all as per manufacturer's specification and also including the cost of making opening for light fitting, grills, diffusers cutout made with frame of perimeter channels suitably fixed, all complete as specified and directed by Engineer in Charge

S & F in repairs 15mm CP Two Way Angular Stop Cock with Wall Flange complete all as specified & directed.

S&F in repairs Brass Butter Fly Jet Spray with 1.2 meter Long Flexible Tube of premium quality fittled to Vitreous china, wash down water closet pan, Stop cock/ angle cock complete all as specified & directed.

S&F Double Arm Wall Mounted Reversible Plain / Magnifying (X3) Pivotal Mirror complete all as specified and directed. Make: Jaquar ACN-CHR-1193N or equivalent as approved.

S&F in repair SS Toilet Roll Holder complete all as specified & directed.

S&F in repair SS Towel Ring complete all as specified & directed.

S&F Towel Rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified and directed.

Supply only integral water proofing compound complete all as specified & directed.

M&L 150mm dia Salt - glazed stoneware drain pipes laid in trenches and jointed as specified internal diiameter of pipe 150mm including demolition, removal from site upto 3.0 Km as directed by engg in charge and breaking up drain pipe ( salt glazed stone ware) complete all as specified and directed.

M & L PCC ( 1 : 4 : 8 ) Type D-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified & directed.

M & L concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 150 mm dia pipe work in foul position complete all as specified & directed.

Demolition of PCC of any description and in any position not otherwise specifically provided for drain etc including removing the same where directed complete all as directed by Engineer-in-Charge.

M&L for pcc 1:3:6 type C1 using 20mm graded stone aggragate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work complete all as specified & directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm pipe complete all as specified & directed.

M&L cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base/padding complete all as specified and directed

Providing and fixing of heavy duty stone cobble (Size 100x100x100mm thick) of any colours (design and colour as approved by GE), laid over and including 40mm thick bed mortar 1:4 (1 Cement :4 coarse sand) and jointing 10mm spaces between cobble stone with mortar and finish with grey cement slurry, the surface should be cleaned afterwards etc. all complete finished as per approved design & slope under instruction of Engineer-in-charge

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified & directed.

S & F for Steel work in tubular trusses etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified & directed.

S&F in repair, for ornamental and intricate design framed work as in doors or gates of angle or other section with gussets plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering, Doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel, sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete conforming to Fe-290 Gde- E-165.

M&L for 15mm thick rendering on Brick masonary wall surfaces in CM 1:4 finised even and smooth with using extra cement all as directed by Engr-in-charge

S&F Dholpur stone jali any colour 20-25mm thick (measured solid), including all mouldings and including stone frame (stone frame as per site requirement) complete all as specified & directed.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting complete all as specified & directed.

Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed.

Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed.

Treating the top surface of filled earth with ATT at the rate of 7.50 litres of emulsion per square metre of surface complete all as specified and directed.

Treating the backfill with ATT in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as specified and directed.

Treating the soil with ATT under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

Material & labour for approved soil filling under the floor, spreading and levelling in layers n.exc. 25cm thick, well ramming including watering as required complete all as specified and directed.

Material & labour for hardcore of broken bricks gauges n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed.

Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed.

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Use and waste of Form work of sides of pillars, posts, struts, piers, columns etc square or rectangular or polygonal rough surfaces of concrete complete all as specified and directed.

M&L Form work to sides and soffits of beams lintels etc finished rough complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick flat fair finished surfaces of concrete complete all as specified and directed.

M&Lfor form work to the edge of concrete flat n. exc 200 mm thick complete all as specified and directed.

Supply & fix mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply & fix mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required as in stirrups complete all as specified and directed.

M&L RCC M25 (using 20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M & L RCC M25 (using 20 mm graded stone aggregate) as in Columns, pillars etc complete all as specified and directed.

M & L RCC M25 (using 20 mm graded stone aggregate) as in beams, lintels over 1.5 m span etc complete all as specified and directed.

M&L for RCC M 25 type A-1 (using 20 mm graded stone aggregate) for roof slabs supported on walls, beams and the like complete all as specified and directed.

M & L 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M&L for applying 15 mm thick rendering using ready mix plaster bags in CM 1:4 on brick / concrete surfaces of external walls finished even and fair, using water proofing compound @ 200 ml per cement bag or as per manufactures instructions complete all as specified and directed. Note :- WPC shall be measured & paid seperately.

M/L 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 15mm thick screed bed in CM 1:6 complete all as specified and directed

Material & labour for glazed coloured ceramic tiles of size 450x300x7-8mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:4 complete all as specified & directed.

M&L 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in path /plinth protection , finish even & smooth without using extra cement complete all as specified and directed.

Material & labour for preparation of new plastered surfaces of walls etc and applying two coats of cement base paint over a coat of primer using roller complete all as specified & directed.

Material & labour for preparation of new plastered surfaces of walls with 1.00mm thick Birla /JK wall care putty and applying two coats of Oil bound distemper using roller to match the existing surfaces as required, complete all as specified & directed.

Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed.

Material & Labour for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement all as specified and directed.

Material & labour for cleaning of plastered /concrete surfaces and applying priming coat using bituminous primer @ 0.30 Kg/Sqm. followed by evenly a tack coat @ 1.20 Kg/Sqm. using with 85/25 grade bitumen, over laid with 3mm thick APP modified polymeric water proofing membrane with non woven polyester reinforced of weight not less than 3.6 Kg/Sqm. unrolled and bonded to substance with side and end laps 75mm and 100mm as per manufacturer’s instructions and finished top of APP water proofing polymeric membrane with a coat of hot blown industrial bitumen 85/25 grade @ 1.20 Kg/Sqm and finally finished with a coat of bituminous aluminium paint @ 0.20 Kg/Sqm complete all as specified and directed.

Flat iron hold fast 25mm x 6mm welded to angle iron door frame complete all as specified and directed.

Mild steel angle iron door frame 40mmx40mmx6mm conforming to Fe 410-0 incl 12mm dia deformed bars for strengthing at bottom of chowkhats incl cutting floor at bottom to accommodated strengthing bars & making good the floor in PCC 1:2:4 type B-0 to match the existing floor complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II).

Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified & directed.

S&F aluminium tower bolts 150mm long, of extruded section complete all as specified and directed.

M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

Supply & fixing steel C.P. grating 100/125 mm dia as reqd at site complete all as directed by Engineer-in-Charge.

S&F for 110 mm bore PVC floor traps plain with grating and 300 mm long out let including jointing with cement concrete type B -1 1:2:4 complete all as specified & directed.

Supply and fix PVC bends 110mm bore, any radius complete all as specified & directed.

Supply & fix steel windows or ventilators fixed type, complete all as specified & directed.

Supply & fix mild steel framed work such as grills, gratings guard bar etc with ends of bars shouldered and/ or riveted etc completed all as specified.

S&F 20mm Gun -metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply & fix bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed.

Supply & fix in vitreous china wash hand basin, white, flat back of size 550x400mm (excluding taps, waste chain and plug and porcelain stopper) but including brackets suitable for 15mm dia pipe complete all as specified & directed.

Supply & fix angular valve, 15 mm dia, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down, high pressure screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.

Supply & fix rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including dismantling existing water tanks complete all as specified & directed.

Supply & fix in PVC low level flushing cistern of 9-10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed.

Supply, fix 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply, fix 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply & fix 3mm thick sheet glass, pin headed, and glazing with oil putty/beading in square not exceeding 0.50sqm each pane complete all as specified & directed.

Supply & fix galvanized mild steel wire cloth with 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

Supply & fix butt hinges, 100 mm long of stainless steel, complete all as specified & directed.

Supply & fix in PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply & fix PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 20mm bore complete all as specified & directed.

S&F as in repair vitreous china wash down water closet pan (pedestal pattern), white (flushing cistern and flush pipe) fixed with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

Supply & fix in repair white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed.

Supply & fix pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed.

S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair chromium plated hand shower with 1.00 mtr flexible pipe for 15mm bore with fittings, complete all as specified and directed.

M&L Concrete bed to drain pipes 150mm, including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC(1:4:8) Type D-2 complete all as specified and directed.

M&L Slat-glazed stoneware drain pipes 150 mm dia laid in trenches and jointed complete all as specified and directed.

M&L Rendring 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed.

M&L PCC(1:3:6) type C1 (using 20mm graded stone aggregate) as in benching to man hole complete all as specified and directed.

Supply & fix in vitreous china urinal half stall type with including providing & fixing of plugs bedding against wall in cement mortar 1:2 pointing around urinal back in cement mortar complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal cross section area) single core, multi stranded PVC insulated, unsheathed copper conductor, FR cable in and including in concealed rigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all steel conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, including earth wire continuous of PVC insulated, unsheathed 1.5 Sqmm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic sheet screwed with brass screws, cup washers complete all as specified and directed for the following:-

One light/exhaust/ fan point controlled by one, one way switches 5/6 Amps complete all as specified and directed.

One 3 pin 5/6 Amps socket outet point on same board, controlled by one, one way 5/6 Amps switch complete all as specified and directed.

S & F Switch piano flush button single pole one way 5 amp complete all as specified and directed.

S & F Socket outlet 3 pin, 5 Amps, flush type complete all as specified and directed.

S & F ceiling rose, surface type, bakelite, 65 x 50 mm, three terminal complete all as specified and directed.

Supply & fix LED lamp 9 W 6500k,240V complete all as specified and directed.

S & F lamp holder insulated body with back plate fix done anodised 100 x 100 mm pressed steel box flush to the wall with 3 mm thick backlite cover complete all as specified and directed.

Supply & fixing LED tube light fitting T/5 surface mounting poly carbonate 240 volts 20 watts, 6500K complete all as specified & directed.

M&L for Building security light fitting 1 x 35 LED type, drawn through and including GI bracket of size 25 mm dia bore light grade 1.4 mtr long, bend to shape including MS clamps made out of flat iron of size 32 x 4 mm - 02 Nos and necessary nuts, bolts, washer as required complete all as specified and directed.

S&F Exhaust fan steel body AC single phase 230/240V size 300 mm sweep with blades, and louvers including hole and plastering complete all as specified and directed.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

Supply and fix MCB single pole 240 volt 6 to 32 amps 10 KA complete all as specified and directed.

Supply and fix MCB SPN 40 Amps, 240 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core complete all as specified and directed.

M&L for sand cushioning, spreading & levelling, watering and well ramming in layers 8 cm before laying the cable and 15 cm after laying the cable and then punned and after punning thickness of sand cushioning should be 18 cm complete all as specified and directed. Note :- Only punned thickness shall be measured for payment.

Supplying & laying burnt clay fly ash old size bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over under ground cable for protection complete all as specified and directed.

GI light grade tubing 40mm dia laid in trenches, road crossing , pasing through pipe or laid in wall/pole complete all as specified and directed.

Cutting existing GI/CI/DI water supply pipe line upto 150mm dia and inserting clamp and all fitting for alterations or additions complete all as specified and directed.

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm dia with all fitting laid in trenches complete all as specified and directed.

S&F in repairs gun metal or globe or gate valves 25 mm dia with iron wheel scewed both ends complete all as specified and directed

Taking down copper / aluminium point wiring with conduit (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling rose, pendents , regulatots , sockets , light fittings etc. removing material to store for keeping in safe custody or taking credit ( from site and making good disturbed surfaces of walls, ceilings etc including two coats of white /credit of above items should be made as per conditions seperately) and making good disturbed surfaces of walls , floors ,etc.

One light point controlled by one, one way switch with cable 1.5 Sqmm size complete all as specified and directed.

One additional light point on sames witch cable 1.5 Sqmm size complete all as specified and directed.

One light/fan point controlled by two 2-way switches with cable 1.5 Sqmm size complete all as specified and directed.

One fan point controlled by one switch with cable 1.5 sqmm size complete all as specified and directed.

One exhaust point controlled by one switch with cable 1.5 sqmm size complete all as specified and directed.

One 06 Amps socket outlet on same board with other switches , with cabel 1.5 Sqmm size complete all as specified and directed.

One 06 Amps socket outlet on independent board , with cabel 1.5 Sqmm size complete all as specified and directed.

One 16 Amps socket outlet same board , with all cabel 2.5 Sqmm size complete all as specified and directed.

One 16 Amps socket outlet independent board , with all cabel 2.5 Sqmm size complete all as specified and directed.

One 16 A/2000W socket outlet independent , with all cabel 4 Sqmm size complete all as specified and directed.

One Bell /buzzer point controlled by one, one way switch with cable 1.5 Sqmm size complete all as specified and directed.

S&F Modular type 6A 1-way SP switch complete all as specified and directed.

S&F Modular type 6A 2-way SP switch complete all as specified and directed.

S&F Modular type 16A 1-way SP switch complete all as specified and directed.

S&F Modular type 6A bell push complete all as specified and directed.

S&F Modular type 2/3 pin combined shuttered type 6A socket complete all as specified and directed.

S&F Modular type 2/3 pin combined shuttered type 16A socket complete all as specified and directed.

Notes : All modular switch/sockets etc shall be from same manufacturers.

S & F bell , multi music type (electronic chime) suitable for 1-Ph, 230 V, 50 Hz AC supply complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.

S & F 3 pin , 6A , 250 V ceiling rose complete all as specified and directed.

S & F single pole & neutral , modular type double door , metallic distribution board conforming to IEC 614939-3, suitable for flush / surface mounting with provision for DP RCCB/RCBO/Isolator/ MCB as incomer and SP MCBs as outgoing , reversible metal door, 100 A copper bus bar, fully shrouded neutral bar, earth bar wire set & cable ties for cable management , pre fitted masking sheet, etc having IK 09 & IP 43 protection complete all as specified in IS 732: 2019 and directed by the engineer-in-charge. Notes :- DP RCCB/RCBO/ Isolaters/MCB & SP MCBs shall be paid seperately

Single pole & neutral double door Db, 8 Way complete all as specified and directed.

S & F triple pole & neutral , modular type double door , metallic distribution board conforming to ICS 614939-3, suitable for flush / surface mounting with provision for DP RCCB/RCBO/Isolator/ MCB as incomer and SP/TP MCBs as outgoing , reversible metal door, 100 A copper bus bar, fully shrouded neutral bar, earth bar wire set & cable ties for cable management , pre fitted masking sheet, etc having IK 09 & IP 43 protection complete all as specified in IS 732: 2019 and directed by the engineer-in-charge. Note :- FP RCCB /RCBO/ Isolaters/MCB & SP/TP MCBs shall be paid seperately

Triple pole & neutral double door DB, 4Way complete all as specified and directed.

S & F MCB for AC applications conforming to IS/IEC 60898-12002, having breaking capacity Icn=10kA , sliding bottom clamp, colour coded on/off indication on dolly , bi-connect IP 20 proteceted lower terminals and sliding shutters , etc complete all as specified in IS 732:2019 and directed by the engineer-in-charge.

6 -32 A , 230 V , 50 Hz , SP MCB(B curve) complete all as specified and directed.

6 -32 A , 230 V , 50 Hz , DP MCB(C curve) complete all as specified and directed.

63A , 230 V , 50 Hz , TPN MCB(B curve) complete all as specified and directed.

M & L for sub main wiring with two single core 06 Sqmm nominal area with 1100 Volt grade, conforming to IS 694 (2010) PVC insulated, unsheathed, with one runof 6 sqmm multi stranded copper conductor cable (FRLSH) ISI marked for continous earth wire drwan in and including concealed rigid non-metallic PVC conduit (ISI Marked) of size 19/20 mm dia medium grade with fitting (ISI) marked including cutting , chasing for conduit and making good ofvwalls etc comlete all as specified and as directed. Note :- (i) Two runs of cable and one run of earth cable & one RM of PVC conduit shall be measured as one length. (ii) Cable for earth wire shall run inside the conduit. (iii) Thimble / lugs of rating of MCB should be used with for fixing in the MCB.

S & F 20 W surface / wall mounted, 4 feet LED batten capable of delivering 2000 lumen , having PC diffuser, luminous efficancy of ≥100 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012 polycarbonate diffuser , housed in powder coated with extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.

S&F in repairs pressure die-cast alluminium housing 18 Watt LED flush / surface/reccesd mounting down light luminaire powder coated finish in round or square shape with integral electronic driver THD<10% complete all as specified and directed..

S&F 15W LED , Mirror light suitable for wall mounting & 220-240 V , 50 Hz mains voltage with built-in-LED & driver , including IP 20 protection as well as electricial connection with 3 core 1.0 mm PVC insulated copper conductor unarmed cable to the fixture complete all as specified and directed.

S&F wall mounting antique type decorative fancy/ round light B22 base fitting with polycarbonate difusser orewired incl 9 Watts LED lamp complete all as specified and directed.

S&F in repair , 10 watt LED bulkhead light outdoor fitting with IP65 protection polycarbonate diffuser, inbuilt surge protection 2kV including electrica connection with 3 core flexible Cu conductor complete all as specified and directed.

S&F in repairs 35 Watt prewired pressure die cast housing LED bldg security light luminaire IP 66 ingress protection ,Efficacy 120 lm/watt ,built-in surge protection, electronic driver incl suitable OD GI pipe bracket,rwo nos mounting clamps with nuts, bolts and washers, electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose/junction box to the fixture complete all as specified and directed by the engineer-in-charge.

S&F BLDC ceiling fan 1200mm sweep 220CMM air delivery,without remote including suitable 1M/2M step fab regulator, BEE 5 star energy rated minimum service value≥6, RPM not more than 350, copper winded motor ,anti rust powder coated aluminium blade,double ball bearing, dynamically balanced including canopy, down rod upto 1.5 mtrs, shackel assembly,safety pin,nut bolt etc electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose/junction box to the fixture and depositing old fan to yard complete all as specified and directed by the engineer-in-charge.

S&F in repair PVC exhaust fan, 250mm sweep with , 720CMH , RPM 1450 , dust proof shutter , copper motor, including suitable electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose/junction box to the fixture depositing old fan to yard complete all as specified and directed by the engineer-in-charge.

S&F in repairMetal heavy duty exhaust fan, 300mm sweep with , 1700CMH , RPM 1450 , bird safety grid/guard , copper winding motor, including suitable electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose/junction box to the fixture depositing old fan to yard complete all as specified and directed.

Supply and fix electric water heater storage type steel body with SS tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete all accessories such as safety valve, thermostate, NRV, connectio piece and taking down old geyser to yard etc.

Taking down existing split/window AC carefully , keeping it in yard in safe custody before starting of work and installation of the same AC including servicing , cleaning , filling of gas if required including copper pipe of suitable size upto 2 runx5mtrs, plug top , 3cx2.5Sqmm wire upto 5 mtrs etc complete all as specified and directed.

Single pole and neutral enclosure with two pin and earth plug and socket complete with one pole MCB complete all as specified and directed.

Manglam Engineers and Construction Co (BID ID -3496729)

Quality Builders (BID ID -3498624)

mohanlal gupta (BID ID -3498618)