PROVN OF MISC B R AND E M WORKS AND PROVISION OF SINK OVER HEAD TANK WITH ASSOCIATED WORKS IN CERTAIN SHOPS AT UNIT REGIMENTAL SHOP AT ATS BELAGAVI

Amount

Supply & fix mild steel framed work such as grills, grating, etc. with end of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors , ladders, framed balusters; walk ways; railings; framework of water tanks and similar work like iron grill doors, framed and hung as gates, including pintel hinges stops, hand made sliding bolts, etc conforming to Fe 290 Gde E 165 complete all as specified and directed

Supply & fix flat iron fillets to existing window frame / wall for securing wire mesh etc. including all necessary drilling, bolting or riveting etc. or similar work conforming to Fe-290 gde E-265 complete all as specified.

Supply & fix for wire netting of galvanised steel wire 1.40mm dia size of mesh 12mm fixed to existing Steel / wooden frame with self tapping screw or tinned tacks of wire staples etc complete all as specified.

M & L for cutting holes in brick walls built in cement mortar for inserting holdfasts and makind good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required, depth of embedded portion of holdfasts or lugs exceeding one brick but not exceeding two bricks complete all as specified and as directed

M & L Preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

Supply and fixed plain mild steel wire 3.15mm dia, galvanised class 3 in detached work such as for mosquito nets and including straining bolts, hooks, eyes fixed to wall, securing with and provision of galvanised iron tying wire of hanging portion with ceiling with galvanised iron staples or steel pins complete all as specified.

S & F mild steel adjustable hooks 12mm dia rod with rack bolt for mosquito net wire including cutting holes in brick walls built in cement mortar for inserting hold fasts or lugs for hooks exceeding one brick but not exceeding two bricks and making good dismantled portion in CM 1:3 or PCC 1:2:4 type B1 complete all as specified and directed Note : (i) Weight of hooks shall not less than 1Kg (ii) Mild steel hook & bolts shall be painted with two coats of synthetic ename paint over a coat of red oxide primer

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.5 m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes n exc 10 sqm on plan and n exc 1.5m in depth and getting out in hard/dense soil all as specified and directed

M & L Plain Cement Concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed

M & L Pre-cast cement concrete 1:3:6 type C 1 using 20mm graded stone aggregate as in solid block masonary exceeding 10cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm with soil obtained from excavation complete all as specified and as directed.

Removing surplus excavated soil to a distance not exceeding 50m and depositing where directed at a level n exc 1.5 m above the starting point all as specified and as directed.

M & L of broken stone or boulders for hard core gauge not exceeding 63 mm gauge, deposited spread and levelled in layers not exc 15 cm thick, watered and rammed to true surface all as specified and as directed.

M & L Plain cement concrete 1:2:4 type B2 using 40mm graded stone aggregate as in 100mm thick sub base to flooring complete all as specified and as directed.

M & L Plain cement concrete 1:2:4 type B1, using 20mm stone agg as in 50mm thick flooring finished even and smooth without using extra cement complete all as specified and as directed.

M & L rendering 15 mm thick cement mortar 1:4 on fair face of brick work or concrete wall surface finished even & smooth all as specified and directed.

M & L Preperation of new plastered wall surface and applying two coats of cement base paint over a coat of self primer complete all as specified and directed.

S & F Plastic dividing strips 38mm wide 1.5mm thick, inserted in position, conform to design complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc all as specified & directed.

M & L Pre-cast cement concrete 1:2:4 type B1 using 20 mm graded stone agrregate as in block masonary not exceeding 10cm width and set in cement mortar 1:4 complete all as specified & directed.

Taking down cement plaster including raking out joint, hacking for key, scrubbing down with water etc. all as specified & directed.

M & L Rendering 10mm thick in cement mortar 1:4 on fair faces of brickwork or concrete surfaces finished even & smooth without using etc cement all as specified & directed.

M & L coloured galzed ceramic tiles in vertical surfaces 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles colour all as specified & directed.

M & L cutting holes not exceeding 150 sq cm superficial area into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required all as specified and as directed.

S & F stainless steel sink 1.00 mm thick for kitchen or laboratory, with plug, waste pipe, washers, including bedding in cement mortar to dwarf wall or including cantilvever cast iron brakcets, connecting union, waste pipe (upto 0.5sqm each), PTMT waste coupling 40 mm dia, (wt-60gms,half or full threaded) and overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed.

S & FPVC LDPE pipes 50 mm dia of pressure rating 6 Kg/cm2 fixed complete to walls ceilings or in floors etc. including necessary clamping, bends, coupling, nipples where required

M & L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm dark shade double charged in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including cement screed bed 15 mm thick cement mortar 1:6 complete all as specified and directed

S & F galvanised iron tube 15mm dia, 'medium grade' ,with all fitting and fixed complete to walls and ceilings complete all as specified and directed

All as per item No 28 here in before but 20 mm dia

All as per item No 28 here in before but 25 mm dia

Supply and fix rotational moulded polyethylene water storage tanks of 2000 ltrs capacity (cylindrical vertical with closed top) hoiseted and fixed in position all as specified in SSR Part-1 including PTMT ball valve high pressure aluminium rod and high density plastic ball screwed for iron pipe and fixed of 25 mm dia (minimum weight 455gms) complete all as specified and directed.

M & L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth but n'exc 20 cm girth all as specified & directed,

M & L reinforced cement concrete 1:2:4, type B1, using 20 mm graded stone aggregate in shelves, cantilevers, lintel over 1.50 m span. etc including necessary form work etc complete all as specified and directed.

M & L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F Gun-metal, globe or gate valves 25 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

Supply and fix bib tap, fancy type, brass chromium plated round handle, screwed down, screwed for iron pipe 15mm complete all as specified and directed

M & L preparation of new plastered wall surfaces and applying two coats of Oil bound distemper over a coat of self primer on 3mm thick wall care putty all as specified and as directed.

S & F PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints, fixed in wall/ floor with necessary clamping all as specified and as directed.

S & F PVC (SWR) bends for 75 mm bore pipe with access door all as specified and as directed.

Supply and fix PVC (SWR) bends for 75 mm bore pipe all as specified and as directed.

M & L Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including screed bed15 mm thick in cement mortar 1:6. complete

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

Boring holes through glazed tile lining for pipes etc not exceeding 50mm dia and making good all as specified & directed

Material and labour for rendering 15mm thick on fair faces of brickwork or concrete surface in CM1:4 using water proofing liquid finished even and smooth without using extra cement. Note:- Water proofing liquid shall be measured and paid seperately.

S & F Reinforced concrete pipes 150 mm dia, class NP-3, laid and jointed complete with collars all as specified and directed.

M & L Plain cement concrete 1:4:8 type D-2, using 40mm graded stone aggregate as in concrete bed to 150mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested all as specified and directed

M & L Precast reinforced cement concrete 1:2:4,Type B-1, using 20mm graded stone aggregate as in cover slabs and the like, set in CM1:4 including necessary form work all as specified & directed. Note:-Reinforcement shall be measured and paid separately.

Supply only Liquid water proofing compound all as specified & directed.

M & L TMT bars 8mm to 10mm dia, cut to length, bent to shape required, including cranking and binding with mild steel wire (annealed)not less than 0.90mm dia all as specified & directed.

M & L Plain Cement Concrete 1:3:6,type C-1,using 20mm graded aggregate as in coping, benching etc in manholes including necessary formwork etc complete all as specified and directed.

Material and labour for MS bars 12mm dia confirming to Fe-290 GdeE-165 for handles cut to length, bent to shape required, including cranking and binding with mild steelwire (annealed) not less than 0.90mm dia. all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms,moulds, mitred/stopped ends etc.all as specified and directed.

Cutting into 150 mm dia existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required

S & F sheet metal enclosure, factory made double door distribution board SPN 4 way, 240 volts, 200 Amps rated bus bar complete all as specified and as directed

S & F MCB SPN 6 to 32 Amps, C Curve, 240 volts, 50 Hz AC supply complete all as specified and directed.

S & F MCB SP 6 to 32 Amps, C Curve, 240 volts, 50 Hz AC supply complete all as specified and directed.

M & L Sub main wiring with two single core PVC insulated copper conductor cable 4 sq mm 1100Volts grade drawn through and including suitable size of non-metallic PVC rigid conduit and conduit accessories / casing and capping fixed on walls, roofs or floors including one run of 4 sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting up complete all as specified and directed. Note:- 3 runs 4 sqmm cabe and one run of PVC conduit / casing & capping will be measured as one unit length.

S & F switch socket combination, multipurpose, 5 in 1, 3 pin 6 / 16 Amps universal type controlled by one switch complete all as specified and directed.

S & F switch socket combination multipurpose 5 in 1, 3 pin 6 Amps universal type controlled by one switch complete all as specified and directed.

M & L Earthing with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25m below normal ground level with top edge of earth plate at a depth not less than 1.5m below normal ground level connected to and including GI strip 32 x 6 mm as earth lead by means of bolts and nuts, check nuts and washers etc made of G I & connected to equipment and earthing test point, earth dolly all as shown in elect plate No 3 of SSR Part-I including all necessary earth work, excavation PCC chamber, RCC 1:2:4 type B1 cover with handle and 20mm dia GI watering pipe and 40 mm dia light grade GI pipe for protection of earth strip, wire mesh, funnel, charcoal dust & common salt, etc and testing on completion all as specified and directed

S & F Galvanised iron wire 4 mm dia as earth continuity complete all as specified and directed.

S & F Double wall corrugated HDPE Pipe IS-16205, size inner dia 32 mm, outer dia 40 mm for cable protection in wall/under ground laying of UG cables including SNAP-FIT Coupler and all fittings as required at site complete all as specified and as directed

M & L Cutting the tar macadam road / hard standings for laying cable and excavating not exceeding 0.75m wide and 0.6m in depth and getting out all as directed including filing back, ramming etc and finishing it with 200mm thick PCC 1:2:4 type B1 complete all as specified and as directed

M & L Galvanised Iron pipe 25mm dia, light grade, with all fitting and fixed complete to poles/route/drains etc and ceillings or laid in floors complete all as specified and as directed

Supply, laying and testing L T under ground aluminium conductor cable of size 2 core 10 sqmm, XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade complete all as specified and as directed

S & F ROVER PRO LED Flood light fittings 50 Watt with presure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP 66 protection including SPD 10 KV complete with all accessories & all necessary fixing arrangement i.e. GI clamps, nuts bolts and washers etc all as specified & directed.

M/S MAHADEV M PATIL

RAJENDRA KRISHNA SARAF