Providing, Supplying erection, testing and Commissioning of pole highmast and light at different places of gwalior vidhansabha file no. 140/25X6/4, 2nd call

Providing and erection of 12.5meter highmast lighting system suitable to install 8No.150w LED flood light fitting and control gear with integral Power tool, weight 340kg. comprising of 2 section of hot dipped galvanized materials as per BSEN ISO 1461 thickness 3mm,dia 100mm &360mm for top and bottom respectively, stress fitting arrangement on site with 350mm overlap dynamic loading to withstand max wind pressure as per -IS 875 part III, parameters for structural & foundation design must be taken from wind tunnel test. Lightning protection of GI single spike 800mm at top and at base inside compartment with doubleinternal lock with adequate size of MCB erected on PVC board complete with base plate of 25mm thick 520mm dia. and foundation bolts having 4nos.bolts of 24mm dia,750mm long(EN8 grade), Anchor plate 445 PCD, including accessories viz. (1)Lantern carriage of 50 NB ERW class B, MS pipe covered with PVC sleeve suitable to carry 250kg. load and upto 6 fittingssymmetrically.(2) Trailing copper cable 5x2.5 sq.mm, EPR insulated PCP sheathed. (3) Double drum/350kg winch having gear 53:1, oil bath (SAE90/140) arrangement.(4) 2 nos. stainless steel wire ropes 5mm dia (7/19) breaking load capacity 1450 kg.x2. (5) Integral power tool 3-phase, 0.75 HP2m/min single speed. (6) Feeder pillar fabricated out of 14 SWGCRCA sheet and comprise of incoming MCB 32A TPN switch, HRC fuses, singledial timer, suitable size of contactors for lighting and power tool, 2nos. outgoing, reversing switch for motor. (7) Foundation drawing, test certificate and guarantee certificate shall be provided by manufacturer.

Designing & casting of Open raft shallow footing foundation with M-20 cement concrete suitable for 12.5 mtrs.High Mast considering the safe soil bearing cacapcity at site as10 T/sqm at 2mtrs. Depth including excavation, foundation nut bolts in an approved manner

Providing and erecting 9mtrs.High hot dipped galvanized octagonal poles with bottom of 200 mmA/F, top100mm,A/Fmade from 3mm thick HT plate & 290x290x16 mm base plate with 1500 mm long decorative sword type double arm bracket complete ererted in an approved manner on provided foundation.Suitable size &type of foundation bolts.4nos.bolts type M20x750mm 'J' type foundation bolts (EN8 grade) (Rate 31094 after deducting amount of bracket 3496, 31094-3496= 27598

Designing & casting withM-20 cement concrete foundation suitable for 9mtrs.Octagonal poles considering the safe soil bearing capacity at site as10T/sqm at 2mtrs.Depth including excavation, foundation nut bolts in an approved manner.

Providing and fixing of ring carriage dia. not less than 750mm made of 50mm dia. GI pipe Light 'A' class for 70mm A/F top octagonal pole with required clamps, nut, bolt etc as required.

Supplying of flood light with hig hpower LED of 1to3W each assemble donngle MCPCB, system lumens output with efficacy> 110lm/W. luminiare having color temp 6500K & 50000 burning hrs life with minimum @ L 70 The colour rendering index of LED light should be more than 70. Luminiare comprises of driver, PF0. 95 &surge protection 4 KV. Housing made of pressure die cast aluminium with heat resistant flat glass, IP66 protection. Submission LM 8008 Form LED Source Manufacturer & LM 7908/IS16106 from NABL approved lab. Manufacturer manadatory i/cconnection lead, testing etc to complete the job. 2Yrs Guarantee certificate from manufacturer.150W make_havlls/ bajaj/ crompton.

Supply of XLPE Insulated power cable (conformingIS-7098) 1100 Volt grade/Heavyduty power cable conforming to IS1554-1100Volts grade, 2core /3½core / 4core ISI MARKED with Alu. Stranded /solid conductorARMOURED 4 CORE 16 Sq.mm.(XLPE) make_ polycab/havells.

Suppying & installing G.I.Pipe for protection of underground cable fixed on wall/support/intrench/fixed between two rigid existing support of wall/beam for erection of ceiling Fan/ down rod for stiff pendent for light luminaries/fan/protective for earthing,lightening conductor down strip/everhead service line/for submercable or centri fugal pump for water supply with necessary iron clamp coupler,bend,te,elbow,nuts and bolts etc.complete in an approved manneras required to complete the job excluding cost of excavation/dismantling & other finished masonary Item complete.For 'B' Class G.I.pipe ISI Marked (IS-1161-68) 80.00mm

Supplying and erecting earth pit of minmum bore dia150 mm size,approved make safee arthing electrode consiting pipe in pipe tecnologie as per IS 3043-1987 made of corriosion free GI pipes having outer pipe dia of 50mm having 80-200 micron galvanising,inner pipe dia of 25mm having 20-250 micron galavinsing,connection teriminal dia of 12mm with constent OHM IC value sourrounded by highly conductiv compund with high charge disipation sutible for effective and maintence free earthing with 2 mtr. Pipe of 80mm outer dia,40mm inner dia and14mm terminal dia,in softrock/marshy soil with 25kg (onebag) back filling compound

Supplying and installing Double wall corrugated pipes (DWC) of HDPE(IS14930Part II-marked)for cable laid underground with necessary connecting sockets/couplings, tees of same material and at required depth upto 90cm. below road/ ground surface,including excavation, back filling with excavated material with ramming and making the surface good. 63.00mm outside dia.

Laying of one number additional PVC insulated and PVC sheathed power cable of 1.1kV grade of size exceeding 25 Sq.mm butnot exceeding 120 Sq.mm directing round in the same trench in one tier horizotal formation including excavation,send cushioing, protective covering and refilling the pit etc. arequired.

Maintenance of High mast panel :- all material to be used shall be ISI markedChange of Contactor reknowned make.

Maintenance of High mast panel :- all material to be used shall be ISI marked Change of digital timer

Labour charges for fixing sheet steel enclosure,MCB DB surface mounting type, as per acceptedpracticeon25x5mmflatironclamps duly embedded in wall,cable connection etc. complete. 8.5 (1) to 8.5 (4)

Supplying and erection of water tight terminal box of 14 SWG M.S. Sheet 4mm thick box of required size to erect the suitable kit kat/ MCB/Switch with Top & bottom folded fitted with rubber ring to make it water tight with pole clamp made from 40x3mm M.S. flat iron with 2 Nos. Nut and Bolts duly painted with 2 coat of Red Oxide paint and 2 coat of Aluminium silver paint erected with cable gland but excluding the cost of the Kit Kat/MCB/Switch complete as per specification: 30x20x15 Cms

Supplying of ISI Marked and accepted standard of Miniature Circuit Breaker (MCB) of 'C' series suitable for 240/415 Volts, 50 Cycle 10 kA Value AC supply confirming to IS : 8828 : 1996, IEC : 60898:2002 but without enclosures :- FOR TRIPLE POLE & NEUTRAL(TPN) 50 Amp to 63 Amp Rating

Supply of steel tubular pole swaged type as per IS:2713-1980Complete with baseplate and top Canopy 410 SP-32 - 9.00 meter make-bajaj,valmount.

Erection of steel tubular or steel rail pole or H-Beam of length exceeding 8 meters but not exceeding 10 meters in cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation, base padding & muffing including exacavation and refilling etc. as required.(4.55 bags of cement/cmt.)

Supplying of streetlight with high power LED of 1to3W each assembled on single MCPCB, system lumens output with effic acy>110lm/W.luminiare having color temp 6500 K& 50000 burning hrs life with minimum @ L 70, The colour rendering index of LED light should bemore than70.Luminiare comprises of driver, PF0. 95 & surge protection 4KV. Housing made of pressure die cast aluminium with heat resistant flat glass/ Lens type,IP66 protection. Submission LM 80-08 Form LED Source Manufacturer & LM 79-08/ IS 16106 from NABL approved lab.Manufacturer manadatoryi/c 50mm. diaG.I. Pipe bracket upto 2mtr.long inrequired angle/shape, connection lead, testing etc to complete the job.2Yrs Guarantee certificate from manufacturer. 70W make-As per SOR standard list or equivalent

Supply of XLPE Insulated power cable (conforming IS- 7098 ) 1100 Volt grade/Heavy duty power cable conforming to IS 1554-1100 Volts grade , 2 core /3½ core/4 coreISI MARKED with Alu. Stranded /solid conductor ARMOURED 4 CORE 10 Sq.mm.(XLPE) make polycab/ havells/phinolex

CIRCUIT WIRING IN EXISTING CONDUIT/PVC CASING CAPPING Supplying and drawing single corePVC insulated cable FR with copper multi strand conductor ISI marked in existingrigidconduit in surface or concealed as per specification. 2.5 Sq mm cable 3 X 2.5 sq mm make polycab/ havells/phinolex

Supplying of ISI Marked and accepted standard of Miniature Circuit Breaker( MCB) of'C'series suitable for 240/415 Volts,50 Cycle,10 kA Value AC supply confirming toIS:8828:1996, IEC: 60898:2002 but without enclosures :-SINGLE POLE (SP) 0.5 Amp to 5 Amp Rating make havells

Labour charges for fixing sheet steel enclosure,MCB DB surface mounting type,as per accepted practice on25x5mm flat iron clamps duly embedded in wall,cable connection etc. complete. 8.5 (1) to 8.5 (4)

Labour charges for fixing sheet steel enclosure,MCB DB surface mounting type,as per accepted practice on25x5mm flat iron clamps duly embedded in wall,cable connection etc. complete. 8.5 (5) & 8.5 to 8.6 (2)

Supplying,installing,testingofearthCoil(coilof115turnsof50mmdia,and2.5 Mtrs. Lead of 4 mm G.I wire.