SPL REPAIR TO OR BLDG NO T-169 AT CHOWKIBAL UNDER THE AOR OF GE 874 EWS

Amount

Demolition of brick work or stone masonry built in cement mortar complete all as specified and as directed.

M&L for stone walling of random rubble masonry, well bonded, bedded and solidly hearted, built in CM (1:4) complete all as specified and as directed.

M&L brick work with old size bricks, straight or curved on plan exc 6m radius, in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished over and smooth w/o using extra cement complete all as specified and as directed.

M & L for rendering 15mm thick on stone masonry concrete surfaces or other than fair faces of brick work or on one side of lathing in CM 1:4 finished over and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 15mm thick on stone masonry concrete surfaces or other than fair faces of brick work or on one side of lathing in CM 1:6 finished over and smooth without using extra cement complete all as specified and as directed.

M & L for raised pointing to random or polygonal rubble, un-coursed or brought up to courses in cement mortar 1:4 complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 in kerb or mud stops rounded or chamfered on edges all as specified (20mm graded aggregate) for copping, including weathering slightly rounded or chamfered using form work straight or curved complete all as specified and as directed.

M & L for applying two coats of cement base paint including preparation of newly plastered surface of wall complete all as specified and as directed.

M & L applying one coats of cement base paint including preparation of old plastered surface of wall complete all as specified and as directed.

M & L applying two coats of Oil bound distemper including preparation of newly plastered surface of wall over 3mm thick wall care putty complete all as specified and as directed.

M & L applying two coats of Oil bound distemper including preparation of old plastered surface of wall over 3mm call care putty complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge thickness in roof covering complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

All as per item ser No 15 but plain sheet as in roof covering/cladding to wall fixed with tapping screws complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc .50 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm and getting out in soft/loose soil complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) in foundations filling and mass concrete complete all as specified and as directed.

Dismantling of timber scantlings 40 sqcm and over in sec in any position in unframed work complete all as specified and as directed.

M &L for second class soft wood as in scantling clean sawn fixed in position complete all as specified and as directed.

M & L for second class soft wood as in scantling clean sawn fixed in position but except wood complete all as specified and as directed.

M & L for mild steel work as in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, any type of sections in vertical post etc of Fe-410W grade E 250 quality A complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness complete all as specified and as directed.

M&L for 75 mm thick PCC type D-2 1:4:8 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L 80mm thick, machine pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006, M-40 Grade complete all as specified and directed.

M&L chequered cement concrete tiles of size 20cm X 20cm and 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded aggregate) and 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 25mm thick PCC 1:2:4 type B0(using 12.5mm graded aggregate) and 15mm thick screed bed in CM 1:5 complete all as specified and as directed.

S & F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in skirtings/dados etc including 15mm thick rendering in CM 1:4 complete all as specified and as directed

M & L for Machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 25mm thick PCC 1:2:4 type B0(using 12.5mm graded aggregate) and 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including 15mm thick backing coat in CM 1:4 complete all as specified and as directed.

Dismantling of boarding, any description, fixed in any position with nails complete all as specified and as directed.

M & L for 2nd class soft wood weather boarding clean sawn, plain 20mm thick or feather edge 15mm to 20mm thick and fixed with 30mm laps complete all as specified and as directed.

M & L for 2nd class Clean sawn battens at 30 cm centre to centre of sectional area of 5 but not exc 15 sqcm complete all as specified and as directed.

M & L for 2nd class hardwood boarding 40mm thick in Floors and Skirting planed one side, with butt joints and fixed with nails supplied and fixed including repairs to existing floors in patches including cutting out, piecing, heading joints etc. complete all as specified and directed.

S&F eaves boarding of 20mm thick of Softwood 2nd class with nails in any situation (except flooring and skirting), planed one side with butt joints complete all as specified and as directed.

S & F 6mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with nails to timber frame work complete all as specified and as directed.

S & F 6mm thick Veneered decorative plywood, grade 2 (with BWR resin) with decorative face veneers on one face; fixed with nails to timber frame work as in ceiling complete all as specified and as directed.

S & F 12mm Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed.

M & L for 2nd class soft wood moulding as in cornices, picture rails and like, not exc 6 Sqcm in section, wrought fixed with nails complete all as specified and as directed.

Taking down chowkhats or frame exc 1.5 Sqm and n exc 4 sqm sqm each with shutter (W/o taking off shutter from frame) complete all as specified and directed.

Taking down chowkhats or frame not exc 1.5 sqm each (without taking off shutter from frame) complete all as specified and as directed.

S&F for 2nd class soft wood, plain, solid, straight chowkats or frames, wrought framed rebated on the solid, rounded or chamfered, put together with flue pinned at joints complete all as specified and directed.

S&F for 35mm thick, 2nd class soft wood, plain framed panelled shutter (any number of panel) with panel of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats complete all as specified and directed.

S&F 35mm thick, 2nd class soft wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 30mm thick, 2nd class soft wood, Glazed and Skeleton shutters open rebated and prepared to receive glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc supplied and fixed to chowkhat, shutter for window and ventilator as specified in SSR Part-I, Section-8, clause 8.24 (b) complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed.

S&F factory made solid PVC moulded door shutters with particle board core 28 to 30 mm thick 9styles) with 2, 4, or 6 raised panel design with 2 mm thick prelaminated moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face fixing in frame with wood free EPS at site as per specification and drawing complete all as specified.

S & F 250 mm long aluminium alloy anodized sliding door (boil type) and fixing clips of sheets cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminium alloy complete all as specified and directed.

S&F pre-coated sheet type door spring, heavy type, 300 mm long including roller and roller plate complete all as specified and directed.

S&F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, articles n exc 200 cu. cm each complete all as specified and directed.

S & F Mild Steel butt hinges 100mm long medium weight complete all as specified and directed.

S & F 200mm long aluminium alloy, anodized barrel tower boll of extruded section complete all as specified and directed

S & F aluminium handles, cast type, anodized 150mm long complete all as specified and directed.

S&F for 75mm long mild stee butt hinges medium weight cold rolled all as specified complete all as specified and directed

S&F for 150mm length aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F Aluminium handle, cast type, anodised 100 mm long complete all as specified and directed.

M & L for sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 in each pane, 3mm thick complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm including fixed complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a priming coat with red oxide over new steel surface over 10 cm width or girth complete all as specified and as directed.

M & L two of synthetic enamel paint over old steel surface over 10 cm width or girth complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surface exc 10 cm width or girths complete all as specified and as directed.

M & L for applying one coats of synthetic enamel point including preparation of old wooden surface exc 10 cm width or girths complete all as specified and as directed.

S& F in repair stainless steel curtain road of 25mm dia of 0.80 mm to 1.00mm thickness pipe including brackets, stops, roller etc complete all as specified and as directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M &L for providing reinforced cement concrete 1:2:4 type B-1 ( 20mm graded aggregate ) (nominal mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) as in flat complete all as specified and as directed

S & F for mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cutting , cranking, hooking ends and binding with mild steel wire (annealed not less than 0.90mm dia complete all as specified and directed.

S & F in repair 15mm thick PVC connection with PTMT nuts of length 600mm complete all as specified and as directed.

M & L for cutting chases ,pinning in making good to facing where required and pointing in CM 1:3 to edges of landing , steps , cills , sunshades, shelves , lintel etc. and cutting chases for concealed water tubing etc and making good cutting n. exc 10 cm girth complete all as specified.

M & L for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing tubing complete all as specified and as directed.

M & L for 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing tubing complete all as specified and as directed.

M & L for Lagging to 15mm bore pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and as directed.

M & L for Lagging to 20mm bore pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and as directed.

S&F in repair bib taps long body 15mm dia Chromium Plated, fancy type screwed down for iron pipe and fixed complete all as specified and as directed.

S & F in repair ISI marked fancy type Pillar Tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S & F in repair of ISI marked 15mm bore stop valve, fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed.

S & F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F in repair Vitreous China white wash hand basin with pedestal white in colour ISI marked of size 550mm x 400mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI brackets 2 Nos embedded in CM 1:4 type complete all as specified and as directed.

S&F in repairs vitreous China squatting pan Orrisa pattern size 580 x 440mm white with "P" and "S" trap front or back inlet etc including connection to trap and to flushing to pipe , anti syphonage pipe etc including provisioning of lime concrete complete all as specified and as directed.

S&F in repairs 10 ltr PVC valveless syphonic action type flushing cistern with brackets flush pipe etc complete including inlet ball valve float and handle including brackets of approved make including all connections & flush pipes for WC complete all as specified and as directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern) white including connection to out going pipe and to flushing pipe and antysyphonic pipe etc including seat cover complete all as specified and as directed.

S&F Vitreous China urinal, half stall type white (excluding flushing cistern, flush pipe) including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed "as in repair" complete all as specified and directed.

S&F in repair 32 mm dia PVC waste pipe for wash hand basin / Kitchen sink etc complete all as specified and as directed.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including dismantling of existing pipes complete all as specified and as directed.

S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including dismantling of existing pipes complete all as specified and as directed.

S & F 75mm bore PVC (SWR) bends of any radius, complete all as specified and as directed.

M & L for 1000 Litres rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling water tanks exc 250 but not exc 500 litres complete all as specified and as directed.

S & F of for ISI Marked 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.

S& F in repair 15mm Gun-metal, globe or gate valves, with iron wheel head, crewed both ends for iron pipe and fixed complete all as specified and as directed.

S& F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, crewed both ends for iron pipe and fixed complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-1 using 20mm stone aggregate as in plinth protection, 75mm thick complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.50 m in depth & getting out in any type of soil.

All As per Item No 02 above but except stone.

Extra over stone walling for hammer dressing to face of stones and dressing of face beds and joints, as specified of random rubble walling uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface n exc 20 mm on granite or trap stone complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed

Removing excavated material n exc 50 m and depositing where directed at al level n. exc 1.50 m above the starting point complete all as specified and as directed.

M&L for sand filling under floor or in foundations complete all as specified and as directed.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors complete all as specified and directed.

M & L for point wiring One light /one fan/one bell point controlled by one switch, with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLSH, drawn through PVC casing caping including accessories and provision of PVC boxes for mounting switches, sockets, fan regulator, as required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly complete all as specified and directed.

As per Item No 105 above but point wiring for One socket outlet 5 pins 5 amps controlled by one switch on same board.

As per Item No 105 above but point wiring One socket outlet 5 pins 5 amps controlled by one switch on independent board.

All As per Item No 105 herein before but wiring with 2.5 sqmm copper wire (FRLSH) and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

All As per Item No 105 herein before but one light point controlled by two 2-way switches, with cables 1.5 sq. mm size.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.

S&F socket outlet multi 5 pins 6 amp complete all as specified and directed.

S & F switch socket combination 2 in 1, 6A flush type complete all as specified and directed.

S & F switch socket combination 3 pin 16A, flush type complete all as specified and directed.

S&F socket outlet multi 3 pins 5 amp, complete all as specified and directed.

S&F ceiling rose, PVC/poly carbonate, isolated body three terminal complete all as specified and directed.

S&F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

Supply and fix LED Bulb 9 Watt complete all as specified & directed.

S & F in repair DB with sheet metal enclosure 415 volts, 4 way with rated bus bar Three pole & neutral (TPN) double door including fixing on suitable rectangular block complete all as specified and directed.

Supply and fix in repairs MCCB Metal enclosures, MCCB FP 100 Amps 415 Volts 16KA fixing in Metal enclosure, in wall mounted type complete with all accessories, including taking down of old unserviceable main switch and reconnecting the cables with proper complete all as specified & directed.

S&F sheet metal enclosure for DBs (double door type) when MCBs to be used single pole and neutral 4way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.

S&F sheet metal enclosure for DBs (double door type) when MCBs to be used single pole and neutral 8 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.

S&F sheet metal enclosure for DBs (double door type) when MCBs to be used single pole and neutral 12 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.

S&F MCB single pole & neutral 32 Amps 230 Volts 'C' series, 10 KA complete all as specified and directed.

S&F MCB single pole & neutral 40 to 63 Amps 230 Volts 'C' series, 10 KA complete all as specified and directed.

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, complete all as specified and directed.

M & L for sub main wiring with two single core 6 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing caping 25 mm dia with all fittings and accessories and one continuous run of 6 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed concealed/ surface including taking down old unserviceable submain wiring and making good disturbed surface complete all as specified and directed.

S&F in replacement LED light fitting 1x9W/10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.Make:-Havells/Syska/Wipro

Supply and fixing in replacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

S&F bldg security light fitting in repair LED 35 Watt for Energy saving and environmental friendly long life made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and Impact resistance of IK07 including driver unit and bracket made up of GI tube of suitable size (1.2 Mtr Length) etccomplete all as specified & directed.

Supply & Laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles and taking out old u/s damaged cables of sizes 35 Sqmm x 3.5 Core complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0 mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, complete all as specified & directed.

M/S AK CONSTRUCTION (BID ID -3468528)

M/S LONE CONSTRUCTION COMPANY (BID ID -3473543)

patriotic builders (BID ID -3473090)

M/S ABDUL AZIZ MIR (BID ID -3468753)

M/s Pall Constructions (BID ID -3468684)

Bidder Name

patriotic builders

M/s Pall Constructions

M/S ABDUL AZIZ MIR

M/S GHULAM AHMAD BABA

M/S AK CONSTRUCTION

M/S LONE CONSTRUCTION COMPANY