ADDITION/ALTERATION OF DOG KENNEL CONCERTINA COIL IMPROVEMENT TO COO COMPLEX LADIES TOILET AND TOILET AT SCITO COMPLEX AND CONSTRUCTION OF X RAY ROOM UNDER GE AF GORAKHPUR

Amount

M&L cutting opening, through brick wall built in cement mortar for door, window and other openings or enlarging existing openings. Converting window into door openings etc or cutting down defective brick work for under pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc to store and rubbish n. exc. 50m where directed at a level.

Taking down chowkats or frame with shutter without taking off shutter from the frames not. Exc. 1.50 Sqm complete all as directed.

Taking down chowkats or frame with shutter without taking off shutter from the frames exc. 1.50 Sqm but not exc. 4.0 sqm each as in complete all as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified.

Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in soft/loose soil.

Excavation over areas, not exceeding 1.5m deep and getting out in any type of soil complete

Excavation in trenches, n. exc. 1.5m wide and n. exc. 1.5 m in depth for foundation etc and n exc. 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed by Engr-in-charge.

Treating the bottom and sides of excavation at the rate of 5 liters of anti-termite emulsion per square meter of surface area.

Anti-termite treating the top surface of filled earth at the rate of 5 liters of emulsion per sqm of surface area.

Treating the soil under plinth protection at the rate of 5 liters of emulsion per sqm of surface area

M&L plain cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in foundation, filling, mass concrete and sub base complete all as specified and directed.

M&L for reinforced cement concrete design mix (M-25) as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc. basement slabs under reamed piles and mass concrete.

M&L brick work in CM (1:4) with using fly ash brick straight or curved on plan exceeding 6.0mtr mean radius complete all as specified and as directed.

Returning & filling including spreading levelling, watering and well ramming in layers n. exc. 25cm using excavated soil, all as specified and directed.

M&L Filling under floor using excavated soil, spreading and levelling in layers n. exc. 25cm thick well ramming in layers and watering etc.

Removing excavated soil not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, rebating and welding to reinforcement of existing roof, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed.

Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Use & waste of form work to sides of concrete foundations, footings, bases of columns, sides & soffits of plinth beams and similar work for rough finished flat surfaces of concrete etc complete all as specified and directed.

M&L Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregates) in foundations, footing, plinth beams, bases for columns and mass concrete complete (reinforcement to be measured separately).

M&L for reinforced cement concrete design mix M-25 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts etc complete all as specified and directed.

M&L for reinforced cement concrete design mix M-25 (using 20mm graded stone aggregate) as in beam (LB/RB) etc complete all as specified and directed.

M&L for reinforced cement concrete design mix M-25 (using 20mm graded stone aggregate) as in roof slab/ chajjas/manhole cover slab etc complete all as specified and directed.

Use & waste of form work to sides of columns, pillars and similar work square or rectangular in shape for rough finished flat surfaces of concrete etc complete all as specified and directed.

Use & waste of form work to sides & soffits of beam etc such as lintel beam, roof beams and similar work for rough finished flat surfaces of concrete etc complete all as specified and directed.

Use & waste of form work to roof slab and similar work for rough finished flat surfaces of concrete etc complete all as specified and directed.

M&L for brickwork with fly ash bricks (old size), straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of external wall

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of internal wall

M&L for rendering 5mm thick in CM 1:4 on concrete surface of ceiling complete all as specified.

M&L for two coats of cement-based paint over a coat of white cement primer newly/old plastered surfaces of wall incl preparation etc complete all as specified and directed.

M&L for two coat of oil emulsion distemper over a primer on newly/ previously plastered surface of wall complete all as specified and directed.

M&L for three coats of white wash on newly plastered surfaces of ceiling complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surface 300x200x7mm/450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or colored cement to match incl screed bed or bedding layer or mortar 10mm thick layer of mortar in CM 1:4 for fixing wall tiles complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 20-25mm thick over 15mm thick cement screed bed in CM 1:4 CM laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified including dismantling of broken kota stone slabs.

Same as item No 35 above but in dado/skirting fixed on wall over 15mm thick cement screed bed in CM 1:4 CM laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified including dismantling of broken kota stone slabs.

M&L for 2nd Class hard wood Plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.

M&L for flat iron 40mmx6mm as in clamps, hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three-way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for concrete type B-1, 1:3:6 (using 20mm graded aggregate) for fixing of hold fasts of door chowkhat and other similar work complete all as specified and directed.

S&F 35 mm thick glazed and Skelton shutter of IInd class hard wood open rebated and prepared to receive glass, gauge etc divided into square with plain, chamfered, or rounded mitered sash bar any no, edge of framing plain, chamfered fitted with and mitered bead for securing glass etc size of member of shutter provided with styles and rails as specified in SSR Part I section 8 clause 8.20 (a) complete.

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fixed to chowkhats complete all as specified.

S&F 200 mm long aluminum anodized barrel tower bolt of extruded section complete.

S&F 150mm long aluminum handles cast type anodized fixed complete.

S&F 100mm long butt hinges medium weight cold rolled mild steel and fixed complete

M&L for painting on new wooden surfaces of any description, not otherwise described, over 10cm width or girth over one coat of pink primer and applying two coat of synthetic enamel paint including preparation of surfaces complete

M&L two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces of any description, over 10cm in width or girth, not otherwise described incl preparation complete all as specified.

S&F 250 mm long aluminiunm sliding door bolt with hasp and staple bolt type and fixing clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section complete.

M&L framed work as grills, gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors and similar work confirming to Fe 290. Gd-E-165

S&F for galvanized mild steel wire clothes 0.56 nominal dia of wire and average width of aperture 1.18mm fixed in new doors/windows complete all as specified.

M&L anodised hanging type window with frame size 60X40X2.00 mm thick and shutter with section bearing bottom 52x18X1.50, top 39.4 x17.7 x1.5mm and sides 39.4 x 17.7 x 1.5mm fixed with hinges incl necessary aluminium jointing cleats, glazing cleats, rubber packing anodised aluminium snape beading, screws etc with 5mm thick tinted/plain glass in panels incl all fitting & fixture complete all as specified and directed.

M&L for powder coated anodised aluminium grill weight n. exc. 5.60Kg per sqm with all fittings & fixtures complete all as specified & directed.

M&L for cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof padding, roof kerb, coping etc mixed with liquid water proofing compound, surface finished even and fair without using extra cement complete all as specified and directed. Note: -WPC will be measured & paid separately)

Supply only Integral Liquid Waterproofing Compound Dr. fixit Pidiproof LW+ or equivalent.

M&L for hardcore broken stone boulders of gauge n. exc. 63mm, deposited, spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface.

M&L PCC type D2 1:4:8 (Using 40mm graded stone aggregate) in foundation filling and mass concrete or as in sub base.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick as in plinth protection finished even and smooth without using extra cement.

M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cill, platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S&F in repair stainless steel sink with drainage board 1.00mm thick for kitchen or laboratory with plug, waste pipe, coupling, washers also including cantilever cast iron brackets connecting union etc, overall size 915x460mm with bowl size 410x330x160mm complete.

Supply & Laying of CPVC pipes of outer dia 20mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed.

M&L for 100mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints F to wall complete as directed.

M&L for 100 mm thick Cement concrete 1:3:6 type D2(40 mm graded stone aggregate) as in sub base including necessary form work complete all as specified.

M&L for 75mm thick cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in paving laid in panels including necessary formwork finished even & smooth without using extra cement.

M&L for 100 mm thick Cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate) as in wearing surface of PCC path complete all as specified.

M&L for 1000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I

Supply & Laying of CPVC pipes of outer dia 25mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

S&F in repair for 15mm bore bib taps chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipes or brass ferrule complete as directed.

Taking down cement plaster on brick wall and ceiling including raking out joints hacking for key scrubbing down with water etc complete all as directed.

M&L for rendering 15 mm thick in CM (1:4) plaster on wall / concrete surfaces finish even and smooth without using extra cement complete including mix with liquid water proofing compound as per manufacturer instruction all as specified. NOTE: - WPC shall be measured and paid separately.

Dismantling of floor tiling and M&L for nonskid Ceramic coloured tiles 7-8 mm thick (square or rectangular) area of each tiles exceeding 0.06 sqm and not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement over 15 mm thick screed bed in 1:4 CM complete all as directed.

Taking down shutter of any description exc. 1.0 but not exc. 2.0 Sqm each.

M&L for preparation of old painted steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint by using mechanised euipments as smart periodicals complete all as specified and as directed by Engr-in-Charge.

Excavating in soft/loose soil for post holes (or similar holes) each n exc. 0.5cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around complete all as specified and directed.

M&L steek work as in col (RHS), post or struts including distance pieces, cleats etc. conforming to IS-1161-1998 grade ST-240

M&L steel work in tubular trusses/Purlins (RHS) including special shaped washer etc. complete using ERW or induction butt welded tubes ST-240

M& L 0.50 mm total coated thickness (0.45 mm base metal thickness) pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet having tensile strength of 550 MPA as an roof covering /cladding to wall fixed with self-tapping screws as specified complete all as specified and directed.

Cutting holes of size exc 100 Sqcm but n exc 250 Sqcm into or through cement concrete slabs, chajjas, etc. reinforced or otherwise for fixing of angle frame work for concertina coil and refilling the hole with PCC 1:2:4 Type B-0 (using 12.5mm aggregate) complete all as specified and directed.

S&F joist, channel, angle or tee sections, fixed independently without connection plates etc (cut to ordinary lengths i.e., within 20mm of length indicated) including cutting, riveting, welding, drilling etc Fe-290 (Gde E-165) complete all as specified and directed.

S&F 450 mm dia punched tap concertina coil (at strength length of coil 10.0 mtr) with two handle and spike at both end of coil dovetailed clips (18SWG) including razor wire 07 Nos, 6.0 mtr length of each wire medium size barbed length 20mm width 14mm including 51 pin, 128 Nos clips in each coil including 230gm/Sqm zinc coating of core wire complete all as specified and directed.

S&F 610mm dia punched tap concertina coil (effective dia 550mm at strength length of coil 10.0 mtr) with two handle and spike at both end of coil dovetailed clips (18SWG) including razor wire 07 Nos, 6.0 mtr length of each wire medium size barbed length 20mm width 14mm including 51 pin, 128 Nos clips in each coil including 230gm/Sqm zinc coating of core wire complete all as specified and directed.

M&L for Brick work with Sub Class 'B' brick straight or curved on plan to any radius in half brick thick wall built in cm 1 :4 complete all as specified and directed

M&L for rendering 15mm thick on faces of brick work or concrete surfaces finished even and smooth without using extra cement in CM 1:4, all as specified and directed.

M&L for rendering 5 mm thick on concrete surfaces of brick work or concrete surfaces finished even and smooth without using extra cement in CM 1:3 as in ceiling, all as specified and directed.

M&L for cutting channel or grooves or rebates n. exc. 15Cm girth and trimming surface in RCC complete all as specified and directed at site.

M&L for 50 mm thick cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in paving laid in panels including necessary formwork finished even & smooth without using extra cement.

Taking down mud plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., all as specified and directed.

M&L for two coat of oil emulsion distemper over a coat of Birla/JK wall care putty on newly plastered surface of wall over a coat of Dr fixit liquid water proofing treatment complete all as specified and directed.

M&L for Brick work with Sub Class 'B' brick straight or curved on plan to any radius in half brick thick wall built in cm 1 :6 complete all as specified and directed

M&L for RCC 1:2:4 type B1 nominal mixed concrete as in slab of shelf with use and waste of form work Complete all as specified

M&L 75mm thick PCC type D2 1:4:8 (Using 40mm graded stone aggregate) in foundation filling and mass concrete or as in sub base.

M&L for screed bed or bedding layer of 15mm thick on faces of brick work or concrete surfaces finished even in CM 1:6, all as specified and directed.

M&L for 40mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in flooring etc surface finished even and fair with using extra cement complete all as specified and directed.

M&L for rendering 10mm thick on faces of brick work or concrete surfaces finished even and smooth without using extra cement in CM 1:4, all as specified and directed.

S&F PVC door Frame of size 50mm x 47mm made out of 5mm plain colur PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening, all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame with necessary SS fitting , all as specified and directed.

M&L for 150mm length of bolt of aluminium anodised barrel tower bolt complete all as specified and directed.

S&F Extruded aluminum alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed.

Preparation of new plaster surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified as directed.

M&L for preparation of new wall surfaces and applying three coat white wash complete all as specified and directed.

M&L for preparation of new wall surfaces and applying three coat white wash on ceiling complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white including connections to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe including seat cover white etc. complete all as specified and directed.

M&L Tubes, 20 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L Tubes, 20 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F fancy type, chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

S&F fancy type, chromium plated pillar taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

S&F chromium plated wall mixer with crutch or butterfly handle lettered for hot and cold screwed down for high pressure complete all as specified and directed. Make - Jaguar, Code con 281KN

S&F rotational moulded polyethylene water storage tanks white colour 500 ltrs (cylindrical vertical with closed top) rotational threaded tank cover hoisted and fixed in position complete all as specified and directed.

M&L Concrete bed to drain pipes 150mm bore including packing under and haunching against the sides of pipes after they are laid and tasted; in cement concrete 1:3:6 type C2 using 40mm graded stone aggregate complete

M&L Reinforced concrete pipes, class NP2, 150mm bore, laid and jointed complete with collars

M&L Cement concrete type C-1 using 20mm graded stone aggregate in surface channels and drains and mass concrete complete

S&F wash hand basins, vitreous China white size 580x450mm size, including cutting for and pinning in ends of brackets or erecting stand including waste pipe and cp waste coupling complete all as specified and directed

M&L Cast iron pipes 100 mm bore with spigot and socket ends, centrifugally cast, class LA, in any length, laid in trenches complete

S&F Cast iron bends, tapers, tee pieces (single & double branch) any type and angle/radius and straight connecting pieces, all ends flanged for flanged pipes upto 150mm bore complete

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

M&L for glazed ceramic-coloured tiles in vertical surface 350 x250 x 7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles including rendering 10 mm thick on faces of brick or concrete surfaces in cm 1:4 complete all as specified and directed.

M&L Non- skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each coloured tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including laying screed bed or bedding layer of mortar 15mm thick in cm 1:6 complete all as specified and directed.

M&L Homogeneous vitrified dark coloured (Border design) flooring tiles 9mm thick of 597 x 597mm size, laid in floors over 15mm thick screed bed in CM 1:6 set and jointed as per manufacturers instruction complete.

Demolition of brickwork built in any type of mortar, complete all as specified and directed.

S&F Powder coating anodised aluminium frame for shutter, windows, ventilators shutters, side hung type without sash bars, aluminim sections weighing 0.55 kg/m including necessary joining cleats, glazing clips rubber packing, anodised aluminium snap beading, screws, stainless steel chrome finish fittings such as peg stays 150mm long (1 no.) hinges type B 21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F 250mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed. all as specified and directed.

M&L for anodized aluminium snap grid frame work of size 605x605mm for false ceiling complete all as specified and directed at site.

M&L for 4.0 mm thick Non asbestos fiber cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws

Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L for two coats of oil emulsion distemper ceiling board complete all as specified and directed.

M&L for powder coated anodised aluminium doors (sliding/hanging type) with frame size 101.6x44.75x2.4mm thick and shutter aluminium anodised and lock rail 44.45 x 47.62 x 2.02mm , stile 44.45 x 47.62 x 1.95 mm, Top rail 101.60 x 44.45 x 1.93mm, intermediate rail 101.50 x 44.45 x 2.01mm and bottom rail 101.60x 44.50 x 2.5mm incl necessary aluminium fittings like butt hinges 04 Nos, aluminium handles 150mm 02 Nos, Aluminium tower bolts 200mm 01 Nos, mortice lock 4 lever MS, hydraulic door closer of suitable capacity 01 No, aluminium door stopper 01 No, jointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screw etc with paneling in two parts with 12mm thick prelaminated particle board in lower panel and 5mm thick tinted glass in upper panels incl all fittings & fixtures complete all as specified and directed.

M&L for powder coated anodised aluminium (sliding/hanging type) for rack shutters/windows /ventilators with three track size 92x29.5x 2mm thick, side & top track frame size 92 x 29.5 x 2mm thick and shutter aluminium 39 x 20 x 2mm thick incl necessary aluminium fittings like jointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screw etc with 5mm thick tinted/plain glass in panels incl all fittings & fixture complete all as specified and directed.

M&L for roof treatment using 4mm thick APP membrane with torching seals method laid over bitumen based @ 4Sqm/litre priming coat using gas burner to heat substrate keeping overlap margin of minimum 100mm as per manufacturer instructions (Dr Fixit Torch shield APP or equivalent) over 10mm thick screed bed in CM 1:4 and covered with 20mm thick PCC tiles pointed in CM 1:4 complete all as specified and directed.

S&F white vitreous china laboratory sink size 600x450x200mm with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidating complete all as spfd.

M&L for chequered cement concrete tiles of size 30cm x 30cm x 25mm thick laid in floor with grey cement and pigment over a screed bed of 15mm thickness made of CM of 1:4 complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

S&F for Steel work in tubular Post, trusses & Purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

Taking down carefully point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

Taking down carefully Unserviceable DB of any rating & capacity after disconnecting the electric connections, and making good disturbed surface complete all as specified and directed at site.

Taking down carefully Unserviceable MCB SP/SPN/Isolator of any rating & capacity after disconnecting the electric connections, and making good disturbed surface complete all as specified and directed at site.

M&L for concealed point wiring for one light / fan point controlled by one 5A switch using 1.5 Sqmm cable (nominal area) stranded copper conductor (FRLS), single core, PVC insulated and unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia all as directed with sunken type pressed steel terminal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes 1 to 4 way and wiring to be terminated in pressed steel sunken boxes with and including all accessories and top cover and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor PVC insulated and unsheathed cable as in earth wire connected to common earth dolly completed all as specified and directed.(a) one light/fan point controlled by one 6 amp one way switch complete all as specified. Note:- (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface. (ii) Switches, socket outlet, call bell, bell push and fan regulators shall be measured ad paid separately.

All as per item No. 138 above but for one 3 pin 6 Amps socket point controlled by one 5 Amps switch on independent board.

M&L for point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, in and including nonmetallic PVC concealed conduit not less than 20mm dia with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken pressed steel GI terminal boxes of not less than 1.6mm wall thickness, concealed in wall with top cover including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete for 3 pin 15 Amps socket independent. Note for item Nos- (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface. (ii) Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

S&F switch piano, flush type 5/6-amp, single pole, one way 230-volt AC Circuit complete all as specified and directed

S&F in repair 10 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Havells cat part No LHEXACP71N1W010 or equivalent in Bajaj/Wipro/CG

S&F socket outlet 5 Amp 5 pin flush type multipurpose, 230-volt AC circuit complete all as specified and directed

S&F socket outlet 2 in 1, 3 pin 5 and 15 Amp, 230-volt AC circuit complete all as specified and directed

S&F socket outlet 2 in 1, 6 pin 15 Amp, 230-volt AC circuit complete all as specified and directed

S&F switch piano, flush type 15 Amp, single pole, one way 230-volt AC Circuit complete all as specified and directed

S&F Electronic Fan regulator 400 watt stepped type Make:- Anchor Penta or other equivalent make & model.

S&F ceiling rose surface polycarbonate 65X50mm three terminals complete all as specified and directed.

S&F Lamp holder, insulated body with back plate suitable for fittings complete all as specified and directed.

S&F 20-watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally prewired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed.

S&F integral LED bulkhead luminaire, 10 W, 230 Volts, IP 65 protection decorative surface mounted, complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.

S&F LED lamps 9 watts complete all as specified and directed.Make:- Havells /Bajaj /CG.

S&F, testing energy saving, die cast aluminium housing IP 65 protection, 35 W LED street light fitting with high power LED as light source complete fixed on pole using 30x5mm FI clamps, nuts, bolts & washers all as per site requirement complete all as specified and directed. Make:-Havells Cat No.ENDCITYLITPLAT+SL35WLED757 SASYBOPCWOSPD or equivalent of approved make

S&F brackets made out of 40/50mm dia medium grade GI pipe 1.50 mtr long bent to shape and size fixed on location using new 2 Nos 30x5mm FI clamps made to shape incl nuts, bolts & washers complete all as specified and directed.

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 6.0 Sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 6 Sqmm stranded copper conductor cable for earth continuity, drawn in & including concealed PVC conduit of dia 20mm pipe with all fittings ISI mark complete all as specified and directed. (Length of 2 No 6.0 Sqmm conductor cable, 1 No 6 Sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 4.0 Sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 4 Sqmm stranded copper conductor cable for earth continuity, drawn in & including concealed PVC conduit of dia 20mm pipe with all fittings ISI mark complete all as specified and directed. (Length of 2 No 4.0 Sqmm conductor cable, 1 No 4 Sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

S&F factory made epoxy powder coated distribution board double door TP& N 4 ways (VTPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knock outs complete all as specified and directed.

S&F factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F MCB, SP, 6 to 32 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, TPN, 40 to 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, SPN, 40 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F ceiling fan complete with hook, clamp and accessories single phase 230/240-volt AC 1200mm sweep and making connection with twisted copper flexible wire 23/0.0076mm complete all as specified and directed.

S&F exhaust fan madeout of steel body complete with louvers, shutters, 300mm sweep , single phase 230 volt AC , fixed properly and making connection with twisted copper flexible wire 23/0.0076mm and connecting and testing complete all as specified and directed.

S&F desert cooler electric driven single phase having nominal air flow capacity 4000 Cum per hour made out of SS body complete all as specified and directed at site

M&L for earthing with Galvanised iron earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal GL) with top of earth plate not less than 1.5 mtr below GL connected to GI strip of size 32x6 mm connected to earth plate electrode by means of GI nuts, bolts, and washers with and incl, PCC 1:3:6 type C-1 pit with cover of RCC 1:2:4 type B-1 reinforced with welded steel wire fabric not less than 4 Kg per Sqm, watering arrangements with 20mm dia GI medium grade pipe, GI funnel with GI mesh, filling with mixture of common salt and charcoal, necessary excavation and earth work in any type soil, including test point, testing and commissioning complete all as specified and directed. Note: (i) Earth resistance should be less than 3 Ohm. (ii) GI strip upto 7.5 mtr will be included in quoted rate.

Supply, laying and testing 25 Sqmm, 3.5 Core XLPE insulated, armoured heavy duty electric cable, screened PVC bedded, galvanised steel strip or wire, with aluminium conductor 1100 V grade, laid in trenches/ along poles, ducts or through sleeve complete all as specified and directed Note: Earth work, sand cushioning and bricks will be measured and paid separately under relevant items.

Taking out existing loose cable any size from trenches etc complete

Supply, laying and testing 10 Sqmm, 2 Core XLPE insulated, armoured heavy duty electric cable, screened PVC bedded, galvanised steel strip or wire, with aluminium conductor 1100 V grade, laid in trenches/ along poles, ducts or through sleeve complete all as specified and directed Note: Earth work, sand cushioning and bricks will be measured and paid separately under relevant items.

Excavating in trenches, not exceeding 1.5m wide and exceeding 1.5m but not exceeding 3.0m in depth for pole foundation, cable trench, etc and getting out in any type of soil complete.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete

M&L Sand cushioning with fine dry unwashed sand in trenches for protection of cables complete as per SSR part I all as specified.

M&L Old size sub class ‘B’ bricks, laid in trenches as cable covers complete

Supply and install and testing split type air conditioner of capacity 1.5 Ton, 5 star rating for working on 230 volt, SP, 50 Hz supply compete including cutting of existing wall and proper fixing making good disturbed surface with existing surface and providing water pipe up to ground level compete all as specified and directed. Make :- Carrier/Voltas/Bluestar/Hitachi/LG

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 90 V to 300 V with output voltage stabilized at 230 V with accuracy of (+-) 2.5% and of capacity 4 KVA complete all as specified and directed Make :- V Guard, CAT No AD 4 Bolt 9050

Supply and fix Monoblock pump, single phase centrifugal, of capacity 0.5 HP complete all as specified and directed

Supply and install and testing Hot and cold split type air conditioner of capacity 1.5 Ton, 5-star rating for working on 230-volt, SP, 50 Hz supply compete including cutting of existing wall and proper fixing making good disturbed surface with existing surface and providing water pipe up to ground level competes all as specified and directed. Make :- Carrier/Voltas/Bluestar/Hitcahi/LG

S&F modular switch 1 way 6 Amp complete all as specified and directed

S&F modular socket outlet 5 Amp , 5 pin flush type multipurpose, 230 V AC circuit complete all as specified and directed

S&F modular socket outlet 2in 1, 15 Amp , 3 pin flush type multipurpose, 230 V AC circuit complete all as specified and directed

S&F modular switch single pole one way 15 Amp 230 V AC circuit complete all as specified and directed

S&F modular electronic fan regulator, 230 V stepped type socketed type complete all as specified and directed

S&F recess mounting LED luminaire of size 2'x2’ white 34 watt, 230 volts for ceiling with driver connector block etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed. Make: - Havells Cat part No. PLANO2X2PLR34WLED840S or equivalent of approved make

S&F sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified.

S&F Earth continuity conductor or main earthing lead of 32 x 6 mm galvanized iron strip, buried in ground or fixed to wall complete.

M&L Earthing with galvanized steel earth plate electrode 600 mm x 600mm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5 m below normal ground level connected to galvanized earth lead wire 4 mm diameter by means of bolts, nut, checknuts and washers of galvanized iron or steel all as shown in electrical plate No 5 of MES Schedule Pt-I 1991, GI earth lead wire protected by GI pipe, 15 mm diameter, light grade and connected to earth test point including excavation & earth work in any type of soil, disposal of soil, providing charcoal dust and common salt upto 15cm above top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20 mm diameter, GI light grade including testing on completion complete.

sanjay enterprises

sri krishna construction

M/s Deeksha Construction electrical & Refrigeration & works

M/S ARORA CONSTRUCTION

M/S B.P. CONSTRUCTION

M/s Rajmani Engineers

M/S SHRI RC YADAV