8486 REPAIR TO ROOF PLUMBING JOINERY FLOORING PLASTERING PATH INTERNAL ELECTRIFICATION AND CONNECTED ITEMS TO CERTAIN BLDG AT ALC OLD CH(SC) OLD CMDC EME BN SHO GE OFFICE AGE E M AGE B R BSO WR STN AND OFFICERS MESS UNDER AGE B R II OF GE SOUTH PUNE

Amount

S&F in repairs Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of old unserviceable AC sheet (corrugated or semi corrugated) / PVC Sheet in roofing including ridges etc complete all asspecified & directed.

S&F in repairs 6mm thick AC corrugated or semi corrugated sheet in roofs walls etc fixed with 'L' or 'J' type hook bolt including dismantling of AC sheet (corrugated or semi corrugated) / PVC Sheet in roofing including dismantling of old unserviceable AC sheet (corrugated or semi corrugated) / PVC Sheet in roofing including ridges etc complete all asspecified & directed.

S&F in repairs pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as of roof covering/ridges fixed with self tapping screws including including dismantling of old unserviceable sheet complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Supply & fixing mild steel rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates of etc. confirming to Fe-410-W (Gde-E-250) Quality-A, complete all as specified and directed.

M & L IInd class hard wood clean sawn batten at 30 cm center to center sectional area exc 5 and n.exc 15 Sqcm etc including dismantling of old unserviceable battens for tiles shingles etc of any size including tiling fillets exc 15 cm spacing etc complete all as specified and directed.

All as per item No.06 above but except battens, complete all as specified and directed.

Dismantling of roof tiles mangalore pattern, complete all as specified and directed.

S&F roof tiles mangalore pattern interlocking at side joints laid dry etc, single layer mangalore pattern tiles or similar tiles in roofing etc complete all as specified and directed.

All as per item No. 08 above but except tiles, complete all as specified and directed.

M & L for ridge tile or hip tiles to suit Mangalore pattern of roofing tiles bedded and jointed in CM (1:6) etc complete all as specified and directed.

S&F in repairs 0.63 mm thick GI corrugated mild steel sheeting with two corrugation side lap, zink coating @ 275 inclusive of both side, fixed with 'L' type or 'J' type or cranked hook in roof complete including dismantling of old unserviceable plain or corrugated steel sheeting in roof covering etc complete all as specified and directed.

S&F 0.80mm thick PGI mild steel sheets with zinc coating @ 275 inclusive of both side as in ridge, hips, valley, gutters and straight flashings including dismantling of old unserviceable plain or corrugated steel sheeting in roof covering etc complete all as specified and directed.

Dismantling timber scantlings, 40 Sqcm over in section in any position, fixed with nails unframed work, complete all as specified and directed.

M&L for 2nd class hard wood as in scantling, clean sawn timber complete all as specified and directed

All as per item No.14 above but except timber scantling, complete all as specified and directed.

S&F in repairs IInd class hardwood 20mm thick boarding fixed with nails in any situation planed one side with butt joints complete all as specified and directed.

M & L for preparation of surface and applying two coats of creosoting to new wooden tiles battens of any size and spacing, (measured overall on oneside only, spaces not deducted) complete all as specified and as directed .

Taking down chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm each, complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm each and n. exc. 2 Sqm each, complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates with and including necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 105 x 60mm including filled with PCC 1:3:6 type C-0 in door frames, complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates with and including necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 125 x 60mm including filled with PCC 1:3:6 type C-0 in door frames, complete all as specified and directed.

S&F IInd class hard wood 35mm thick factory made, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rail as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F IInd class hard wood 35mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. The size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, suppling and fixing in opening complete all as per specification and as directed by Engr-in-Charge

S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product Drg given in SSR Part-II 2020 Refer item No. 8080 as specified and directed by Engr-in-charge.

S&F 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F aluminium anodised barrel tower bolt 200mm legth of excluded section and fixed, complete all as specified and directed.

S&F Aluminium handle cast type, anodised 150mm, complete all as specified and directed.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed.

S&F aluminium powder coated three track sliding window with two shutters of 4mm thick tinted glass of modigaurd and one shutter of stainless steel wire mesh including good quality of bearing handle, locks, PVC rubber lining etc using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay complete all as specified and directed :- Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606,Interlocking – 20605, Top and bottom – 20604.

S&F aluminium powder coated two track sliding window with two shutters of 4mm thick tinted glass of modigaurd including good quality of bearing handle, locks, PVC rubber lining etc using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, complete all as specified and directed :- Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606,Interlocking – 20605, Top and bottom – 20604.

S&F aluminium powder coated ventilator with moveable louvers including 100mm wide pinheaded glass strip using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, complete all as specified and directed :- (a) Frame - 20048 (b) Glazing clip - 19352

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed.

M&L for framed work such as grills, gratings, etc.with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

S & F figured glass pin head type, 3mm thick and glazing with oil putty in square n.exc. 0.50 Sqcm in each pane including hacking out old broken glass (any thickness, size , quality or description) from metal frames , glazed with putty of fixed with beads etc complete all as specified and directed.

S & F Aluminium anodised Powder coating of ivory/brown colour frame / shutters for windows/doors/Ventilator with one or more rebates including joining cleat, glazing clips, anodised aluminium snap beading for fixing, screws, anodised aluminium fittings such as peg stays, handle etc complete all as specified and directed.

S&F Aluminium powder coated single leaf door on pivots alongwith hydraulic door closer door lock, handle, 5mm thick plane glass fixed with rubber beading in top panel and glazing clips MS clamps and 12mm thick laminated particle board as bottom pannel both side laminated using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, complete all as specified and directed :- (a) Rectangular tube - 14005 (b) Vertical rail - 19501 (c) Top rail -19503 (d) Middle rail -20060 (e) Bottom rail- 19511

M & L Double action Floor Spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing poivet made of brass, other parts made of brass, other part made of mild steel heavy duty and fixed complete all as specified and directed

Hacking out old broken glass (any thickness,size,quality or description) from wooden frame or metal frames fixed with putty or fixed with beads,and S & F 4 mm thick sheet glass, ordinary quality and glazing with oil putty/glazing clip in square not exc 0.50 sqm in each pane, complete all as specified and as directed by Engineer-in-Charge

M&L for prepration of new or previously untreated wooden surface and applying two coats synthetic enamelled paint over one coat of pink primer of any descriptiion, not otherwise described over 10cm width or girth, complete all as specified and directed

M&L for prepration of new or previously untreated steel surface and apply two coats synthetic enamelled paint over one coat of red oxide primer of any descriptiion, not otherwise described over 10cm width or girth, complete all as specified and directed

M & L for water proofing treatment to sunken slab, walls, etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (a) Clean the sunken portion of toilet/Baths/WCs/Kitchen thoroughly remove laitance, dirt, dust etc. (b) Forming angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar (“ Dr fixit” Pidicrete URP” or equivalant) (c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bathseal Tape” and the gaps to be grouted with non-shrink cementitous grout “Dr Fixit Bathseal Grout” or eqvt. Nahani traps etc to be fitted securely and the gaps around it to be grounted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bathseal Plus” or eqvt on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely. (e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dry. Extend the coating upto 150mm above the FFI. Above FFI, another cementitious waterproofing waterproof coating “Dr Fixit Pidifin 2 K” or eqvt can be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and pply second coat after 6-8 hoours and allow to dry completely. (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed M 15 type B0 mixed with integral WPC (Liquid) laid to stope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2. (g) After completing plumbing work in the toilet/WC/Bath/Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready to make tile grouts of appd makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc. (Note: Contractor will provided all provisions as mentioned above except 1:5:10 lean concrete which shall be measured and paid seapreatelly,

M&L for PCC 1:5:10 type E2 (using 40 mm graded brick aggregate) lean concrete for filling sunken floor etc, complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded brick aggregate) as in coving rounded, chamfered etc on sunken floor etc, complete all as specified and directed.

M & L for non skid joint free ceramic coloured (dark shade) tiles or size 300mm x 300mm x 7 to 8mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6) including demolition of old unserviceable stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar etc complete all as specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick Colour (square/rectangular) polished, area of each tiles exc.18 sqm but not exceeding 0.36 sqm, in floors etc. of light shade, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM (1:6) including demolition of old unserviceable stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar etc complete all as specified and as directed.

M & L for glazed colour ceramic tiles of size 300mmx600mm x 7 to 8mm thick in wall laid over and including 10 mm thick CM (1:4) backing coat , set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles including demolition of old unserviceable stone slabs or tiles of any description or thickness laid bedded and pointed in any mortar including filleting triangular shape on top edge in CM 1:4 etc complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 (Using 12.5mm graded stone aggregate) as in floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed.

M & L for granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, Door cills ,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of old stone slabs and tiles of any description or thickness, complete all as specified and directed.

Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations, complete all as specified and directed.

M&L for machine cut cuddappa stone as in shelves, 20 to 22 mm thick both side polished bedded & jointed in CM (1:3) including dismantling of old unserviceable stone slabs and tiles of any description or thickness, complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n. exc. 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L for 75 mm thick PCC type D 2 1:4:8 (using 40mm graded aggregate ) as in pavement, sub base of flooring etc. complete all as specified and as directed.

M&L chequrred cement concrete tiles 30cm x 30cm x 20mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment laid over and including 20mm thick screed bed in CM (1:4) including dismantling of old unserviceable stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar, complete all as specified and as directed.

M&L for coloured precast cement concrete interlocking paver block of glossy finish any shape and size confirming to IS-15658-2006, 60mm thick, M-35 grade with grey cement and no pigment laid over & including 30mm thick stone dust/grit including dismantling of old unserviceable stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar, complete all as specified and as directed.

M & L for machine cut kota stone slab flooring 20-25 mm thick, laid over and including 20 mm thick screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shed of slab including rubbing and polishing complete including dismantling of old unserviceable stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar, complete all as specified and as directed.

All as per Ser item No. 59 above but as in riser of steps, skirting, dado and pillars etc including filleting triangular shape on top edge in CM 1:4, complete all as specified and directed.

M&L for cement concrete type B1-1:2:4 (20 mm graded aggregate) in coping, coving, edging etc including necessary form work, complete all as specified and as directed.

Demolition of cement concrete in any position /any depth, complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar (1:6) on fair faces of brick/concrete surfaces finished even & smoth without using extra cement including taking down cement plaster complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on faire faces of brick/concrete surfaces finished even & smoth without using extra cement including taking down cement plaster complete all as specified and as directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete including demolition of Brick work, solid block or stone masonry built in cement mortar or cement lime mortar complete all as specified & directed by Engr-in-Charge

M&L for rendering 10mm thick in cement mortar (1:6) on faire faces of brick/concrete surfaces finished even & smoth without using extra cement all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on faire faces of brick/concrete surfaces finished even & smoth without using extra cement complete all as specified and as directed.

M&L for prepration of newly plastered sureface and applying two coats cement base paint complete all as specified and as directed.

M&L for prepration of newly plastered sureface and applying two coats oil bound distemper complete all as specified and as directed.

M & L for 15 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc including taking up or down steel tubing and connections, complete all as specified and directed by Engineer-In-Charge.

M & L for 20 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc including taking up or down steel tubing and connections, complete all as specified and directed by Engineer-In-Charge.

M & L for 25 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc including taking up or down steel tubing and connections, complete all as specified and directed by Engineer-In-Charge.

S&F rotational moulded polyethylene water storage tank 500 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 20 mm ball valve high pressure PTMT with rod & high density plastic ball anf brass tank nipple of existing size including dismantling of old unserviceable water tanks and removing to store complete all as specified and directed by Engineer-in-Charge.

S&F rotational moulded polyethylene water storage tank 1000 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 20 mm ball valve high pressure PTMT with rod & high density plastic ball anf brass tank nipple of existing size including dismantling of old unserviceable water tanks and removing to store complete all as specified and directed by Engineer-in-Charge.

S&F rotational moulded polyethylene water storage tank 2000 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 20 mm ball valve high pressure PTMT with rod & high density plastic ball anf brass tank nipple of existing size including dismantling of old unserviceable water tanks and removing to store complete all as specified and directed by Engineer-in-Charge.

Disconneting existing tank of capacity exceeding 500 and not exceeding 1000 litrs, setting aside (or lowering if required) for repair, cleaning etc and hoisting if required, reconnecting and refixing in position etc, complete all as specified and directed.

M & L for water proofing treatment to roof slab, wall, chajjas etc; shall be carried out as specified below including removing of old water proofing treatment incl screed bed and cleaning the surface of slab with wire brushes removing dust foregin material including flushing at junction of walll and removing the rubbish off the premises to a distance exc 500 m all as directed by Engr-in-Charge :- (a) M & L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces. (b) Preparing plastered surfaces of roof slab, walls, chajjas etc; by proofing with broom sweeping free from dust etc; evently applying a coat of approved bitumenous primer @ 0.20 Kg/Sqm of area complete all as specified. (c) Laying APP polymer modified approved membrane, non woven, polyster, weighing not less than 3.50 Kg/Sqm with laps & overlaps as specified & joints sealed and applied complete by torch appplication method all as speciifed & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepage and rectifying the same to the entire statisfactory of Engineer-in-charge. (d) Finally applying a coat of solar reflective bitumenous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as speicifed & as directed by Engr-in-Charge.

M & L for 2nd class hard wood plain fillets, square, rectangular in section wrought screwed with nails area exceeding 13sqcm but not exceeding 25 sqcm, complete all as speicifed & as directed

M & L for 18/19 mm thick perlaminated particle board, interior graded, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in Shutter of Cupboards/Kitchen cupboard/ Pelmets with teak beading of all sides fixed in repair complete all as specified and directed.

M&L for 18mm thick plywood BWR grade type BB fixed with fevicol and nails for working table / storage almirah to the size and pattern as shown by engr-in-charge at site, complete all as speicifed & as directed.

M&L for 0.90mm thick decorative laminate type-I of surface finish (colour & pattern as approved) fixed with approved adhesive as per manufacturer’s instruction finished to approved size for working table complete all as speicifed & as directed by Engineer-in-Charge.

M&L for Ist class H.W. plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in I st class H.W. sectional area n. exc. 6 Sqcm complete all as speicifed & as directed

S&F continuous (piano) hinges, mild steel, bright finish, width of flaps (When open) 30mm, complete all as specified and directed.

S & F for 100 mm long Hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screw complete all as specified and directed.

S & F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished complete all as specified and directed.

S&F in repairs Health faucet ABS body with 1.0mtr SS braided connection pipe complete all as specified & directed. Make CERA Product code F830105AB or equivalent model in PARRYWARE/ Hindware as approved.

S&F Wall mixer with bend pipe for overhead shower complete all as specified and directed. (Make : CERA Product code F1099401 or equivalent model in PARRYWARE/ Hindware)

S&F in repairs CP toilet paper holder confirming to CAT No F5015109CH of CERA or equivalent model in PARRYWARE/ Hindware, complete all as specified and directed.

S&F in repairs 125mm Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F Soap dish confirming to CAT No F5007106 of CERA or equivalent model in PARRYWARE/ Hindware complete all as specified and directed.

S&F towel ring confirming to CAT No F5014115CH of CERA or Equivalent make in Jaquar/PARRYWARE/ Hindware, complete all as specified and directed.

S&F in repairs 2-Way Bib cock with Wall Flange complete all as specified & directed. Make : CERA Product code F2013163 or Jaquar/PARRYWARE/ Hindware

S&F in repair 15mm CP Fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F bottle trap 32 mm bore dia of discharge of PTMT having minimum water seal 25mm minimum weight 260 gms, complete all as speciifed and directed.

S&F in repairs Semi insert Wash basin of Size 605 x 410 x 190mm complete all as specified & directed. Make : CERA Product code A2030102 or equivalent model in Jaquar/PARRYWARE/ Hindware

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as speciifed and directed.

S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 laid under floors with necessary socket, elbo & bend etc complete fixed to wall or in floors etc complete all as specified & directed.

S&F in repairs 1.25mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull but gear operated type with bevel gear box and crank handle, complete all as speciifed and directed.

S&F in repairs Safety lever locks mild steel with 4 levers for rolling shutters, complete all as speciifed and directed.

S&F in repairs Ball bearing suitable for rolling shutters, complete all as speciifed and directed.

S&F in repairs aluminium powder coated fancy type curtain rod 25 mm bore, medium weight, complete all as specified & as directed.

S&F aluminium powder coated fancy type decorative brackets suitable for 25 mm dia curtain rod (minimum projection from wall 75 mm ) fixed to wall including drilling, rawl plug, screws etc complete all as specified and as directed.

S&F Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed (Al die cast body) and fixed in repairs, complete all as speciifed and directed.

S&F 20mm bore ‘D’ type brass CP tubular towel rail 60 cm long between flanges complete fixed in repairs, complete all as speciifed and directed.

S&F PVC (SWR) 110mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall including demolition & breaking up drain pipes PVC or AC set in CM or solvent, complete all as speciifed and directed.

S&F PVC (SWR) 75mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall including demolition & breaking up drain pipes PVC or AC set in CM or solvent, complete all as speciifed and directed.

S&F in repair PVC (SWR) bends any radius 110 mm bore, complete all as speciifed and directed.

S&F in repair PVC (SWR) bends any radius 75 mm bore, complete all as speciifed and directed.

S&F in repair PVC (SWR) bends any radius 110 mm bore provided with access door, complete all as speciifed and directed.

S&F in repair PVC (SWR) bends any radius 75 mm bore provided with access door, complete all as speciifed and directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 110mm bore, complete all as speciifed and directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 75mm bore, complete all as speciifed and directed.

S&F PVC (SWR) vent cowl 110 mm bore, complete all as speciifed and directed.

S&F PVC (SWR) vent cowl 75 mm bore, complete all as speciifed and directed.

M & L for PVC (SWR) floor trap, dia of outlet 75mm, plain with grating including jointing with solvent cement, complete all as speciifed and directed.

S&F in repairs 15mm bore pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as speciifed and directed.

S&F in repair vitreous china wash hand basin, white, 550x 400mm flat back including providing CI brackets, PVC waste pipe 32mm dia, waste coupling 32mm bore of CP, complete all as speciifed and directed.

S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440mm white, with and including integral foot rest, concrete bedding and PVC flushing cistern 10 Ltr capacity including all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' coloured, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F in repairs stainless steel sink 1.00 thick for kitchen or laboratory with plug waste pipe washers including cantilivers cast iron brackets connecting union etc over all size 495mmx420mm with bowl size 410mmx330mmx160mm, complete all as speciifed and directed.

S&F in repairs stainless steel, sink with drainboard 1 mm thick for kitchen, with plug, waste pipe, washers incl cantilever CI Brackets, connecting union etc & connecting to inlet/out let for smooth functioning size of sink 915 x 460 mm overall and bowl size 410mmx355mmx165mm, complete all as speciifed and directed.

S & F vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe, complete all as speciifed and directed.

S&F salt grazed stone ware gully traps, square 150x150 size fixed in repairs, complete all as speciifed and directed.

M&L for Gypsum ceiling board for ceiling pre-painted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light etc, including taking down of old unserviceable boarding / ceiling of any description, fixed in any position etc with nails, complete all as specified and directed.

Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete fitting such as switches, ceiling rose, pendent, regulators etc removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making good disturbed surfaces of wall, floor etc. complete all as specified and as directed.

Taking down old unserviceable / worn out aluminium sub main of any type and size, complete all as specified and directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with mild steel concealed sunken boxes with earth dolly duly, covered with hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete including cutting and chases in walls and including making good of disturbed surface and finish with two coats of white / colour washing / distempering etc to match the existing surface complete all as specified and directed for the following :- (a) One light / fan point controlled by one, one way switch 5 Amps.

(b) One 5 Amps socket outlet point controlled by one switch on independent board.

(c) One 5 Amps socket outlet point controlled by one switch on the same board with other switches.

(d) One bell point controlled by one, bell switch 5 Amps

All as per item No. 128 above but with stranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multi-stranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multi-stranded copper conductor 2.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked drawn through in existing conduits with mild steel concealed sunken boxes with earth dolly duly, covered with hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete including cutting and chases in walls and including making good of disturbed surface and finish with two coats of white / colour washing / distempering etc to match the existing surface complete all as specified and directed for the following :- (a) One light / fan point controlled by one, one way switch 5 Amps.

(b) One 5 Amps socket outlet point controlled by one switch on independent board.

(c) One 5 Amps socket outlet point controlled by one switch on the same board with other switches.

(d) One bell point controlled by one, bell switch 5 Amps

All as per item No. 133 above but with stranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multi-stranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multi-stranded copper conductor 2.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed.

S & F Modular switch one way 6 Amps, 1 module, complete all as specified and directed.

S & F lamp holder (Angle / bracket), PVC/ Polycarbonate type with back plate suitable for batten/ slanting fittings, complete all as specified and directed.

S&F vertical 8 way TPN double door recess mounted/wall mounted including 01 no. of MCCB as incommer is 3 pole and neutral, 100 amps rating & 16 KA breaking capacity pre fitted at factory complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4.0 Sqmm nominal area and drawing into existing conduit including one run of PVC insulated 2.5 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire including making good of disturbed surface and finish with two coats of white / colour washing / distempering etc to match the existing surface complete all as specified and as directed. Note:- Two runs of 4.0 sqmm cable and one run of 2.5 sqmm cable shall be measured as one unit length.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into existing conduit including one run of PVC insulated 4 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire including making good of disturbed surface and finish with two coats of white / colour washing / distempering etc to match the existing surface complete all as specified and as directed. Note:- Two runs of 6 sqmm cable and one run of 4 sqmm cable shall be measured as one unit length.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 10 Sqmm nominal area and drawing into existing conduit including one run of PVC insulated 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire including making good of disturbed surface and finish with two coats of white / colour washing / distempering etc to match the existing surface complete all as specified and as directed. Note:- Two runs of 10 sqmm cable and one run of 6 sqmm cable shall be measured as one unit length.

M & L for Sub main wiring complete with two single core 4 sqmm ,1100 volts grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor of 4 sqmm in and including caping casing including making good of disturbed surface and finish with two coats of white / colour washing / distempering etc to match the existing surface, complete all as specified directed by Engineer-in-Charge. Note: (i) Two runs of 4 sqmm cable and one run of 4 sqmm cable of earth continuity conductor and one run of caping casing shall be measured as one unit length.

M & L for Sub main wiring complete with two single core 6 sqmm ,1100 volts grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor of 6sqmm in and including caping casing including making good of disturbed surface and finish with two coats of white / colour washing / distempering etc to match the existing surface, complete all as specified directed by Engineer-in-Charge. Note: (i) Two runs of 6 sqmm cable and one run of 6 sqmm cable of earth continuity conductor and one run of caping casing shall be measured as one unit length.

M & L for Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor of 4 sqmm with and including concealed PVC conduit (Heavy duty) including cutting chases, pinning in and making good to facings where required, complete all as specified directed by Engineer-in-Charge. Note: (i) Two runs of 6 sqmm cable and one run of 4sqmm cable of earth continuity conductor and one run of PVC conduit shall be measured as one unit length.

M & L for Sub main wiring complete with four single core 6 sqmm,1100 volts grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor of 4 sqmm with and including concealed PVC conduit (Heavy duty) including cutting chases, pinning in and making good to facings where required, complete all as specified directed by Engineer-in-Charge. Note: (i) Four runs of 6 sqmm cable and one run of 4sqmm cable of earth continuity conductor and one run of PVC conduit shall be measured as one unit length.

Cutting chases, pinning in, concrete block walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed PVC conduit and making good, cutting n. exc. 10 cm girth, complete all as specified and directed.

S&F MCB DB, TPN, 4 way double door with 200 amp rated busbar, double door, 240V SPN recess mounted / wall mounted, complete all as specified directed.

S&F MCB DB, SPN, 8 way double door with 200 amp rated busbar, double door, 240V SPN recess mounted / wall mounted, complete all as specified directed.

S&F MCB DB SPN 4 way double door with 200 amp rated busbar, double door, 240V SPN recess mounted / wall mounted with common earth dolly, complete all as specified directed.

S&F MCB SP 6-32 Amps, 10KA, 'C' series, complete all as specified directed.

S&F MCB SPN 40-63 amps,10KA, 240V,'C' series, complete all as specified directed.

S&F in replacement MCB TPN 63 Amps ,10KA, 415V, 'C' series, complete all as specified and as directed.

Preventive maintenance of storage type electric water heater (Geyser) of capacity 25/50 ltrs comprising of the following tasks / jobs and replacement of defect parts including applying one coat of synthetic enamel paiting (If required) etc complete at different locations of any make:- (a) Inspection of geyser after opening bottom cover plate. (b) Examine water tightness of storage tank. (c) Carry out operation of all stop cocks, pressure reducing valves, etc. to ensure free movement of the working parts. (d) Replace washers and glands of defective taps to ensure water tightness smooth functioning. (e) Inspect vent pipes and remove blockage obstruction if any. (f) Check and correct earth continuity of electrical items. (g) Check and correct temperature setting of thermostats and test its functioning. (h) Checking and adjustments of pressure reducing valves. (j) Checking of dead weight type high pressure release valve (PRV) by removing dead weight protection cleaning the seat and ensuring that the waste hole is not blocked/chocked. (k) Testing of Geysers after repairs / maintenance in all respect for proper functioning. Note :- Spare parts shall be measured and paid under respective items of BOQ as “Supply only”

Supply only thermostat ISI marked suitable for 25 to 50 ltrs capacity geysers, complete all as specified and directed.

Supply only safety valve/dead weight valve ISI marked suitable for 25 to 50 ltrs capacity geyser, complete all as specified and directed.

Supply only heating element for 1KW/1.5 KW rating as required at site (any type) including rubber washers (ISI marked), complete all as specified and directed.

Supply only inner tank, made from copper sheet, suitable for 25 ltrs capacity geysers, complete all as specified and directed.

Supply only inner tank, made from copper sheet, suitable for 50 ltrs capacity geysers, complete all as specified and directed.

Supply only apparatus plate, suitable for 25 to 50 ltrs capacity geysers, complete all as specified and directed.

S&F in repairs PVC connections pipe with brass hexagonal adapters both side Suitable for 15mm dia pipe 45/60cm long for cold water as per requirement, complete all as specified and directed.

S&F in repairs PVC connections pipe with brass hexagonal adapters both side Suitable for 15mm dia pipe 45/60cm long for hot water as per requirement, complete all as specified and directed.

S&F in repairs 15A plug top and connection, complete all as specified and directed.

Supply only non-return valve 15mm/20mm dia of brass ISI marked, suitable for 25 to 50 ltrs capacity geysers, complete all as specified and directed.

Supply only inner water tank of 25 to 50 Itrs capacity in gas welding/ brazing for water tightness and testing complete, suitable for 25 to 50 ltrs capacity geysers, complete all as specified and directed.

Supply only indicators, suitable for 25 to 50 ltrs capacity geysers, complete all as specified and directed.

Supply only gasket rubber ring for Heater plate of any size, suitable for 25 to 50 ltrs capacity geysers, complete all as specified and directed.

Supply only inspection cover for outer container, suitable for 25 to 50 ltrs capacity geysers, complete all as specified and directed.

Supply only outer container made out of 14 gauge CRCA sheet duly painted, suitable for 25 ltrs capacity geysers, complete all as specified and directed.

Supply only outer container made out of 14 gauge CRCA sheet duly painted, suitable for 50 ltrs capacity geysers, complete all as specified and directed.

S&F 3 core cable PVC insulated and unsheathed with stranded copper conductor of size 2.5 Sqmm from socket / switch to geyser, complete all as specified and directed

S&F 3 core cable PVC insulated and unsheathed with stranded copper conductor of size 4 Sqmm from socket / switch to geyser, complete all as specified and directed

M&L for point wiring with 1.5 sqmm PVC insulated copper conductor FRLS cable 1100 Volts grade complete with & including PVC casing and capping and accessories with PVC ISI marked switch board, mounted on surface of walls including continuous PVC insulated copper earth wire 1.5 Sqmm connected to common earth dolly for the following:- (a) One light/fan/ point controlled by one switch

(b) One 5 Amps Socket outlet point controlled by one switch on independent board

(c) One 5 amps socket outlet point on same board with other switches

(d) One bell/buzer point controlled by one bell push

M & L for point wiring with 2.5 Sqmm copper conductor FRLS cable for 15 amps socket outlet point on independent board and continuous PVC insulated copper earth wire 1.5 Sqmm in PVC casing and capping and including PVC mounted switch board, complete all as specified and directed.

M & L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI 694 marked in and including heavy duty, PVC rigid conduits 20 mm or higher dia as required at site, totally concealed in walls/floors/ceiling including all conduit accessories/fittings/junction boxes/inspection covers etc; of heavy grade, ISI marked and sunk terminal boxes of factory made pressed steel housing, totally concealed in walls suitable for modular switch socket accessories with earth dolly with suitable modular plate etc, including PVC insulated stranded copper conductor 1.5 Sq.mm (nominal area) single core cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box including making good of disturbed surface and finish with two coats of white / colour washing / distempering etc to match the existing surface complete all as specified and directed for the following :- (a) One light / fan point controlled by one, one way switch 5 Amps.

(b) One 5 Amps socket outlet point controlled by one switch on independent board.

(c) One 5 Amps socket outlet point controlled by one switch on the same board with other switches.

All as per item No. 179 above but with stranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multi-stranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multi-stranded copper conductor 2.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed.

S&F modular type switch 6A single pole, one way, 240 volts, Cat. No 6730 00 of Legrand "Myrius series", complete all as specified and directed.

S&F multipurpose socket outlet 16A -2/3 pin, 2 module for 230 volts flush type cat part no. 6730 42 of Legrand "Myrius series", complete all as specified and directed.

S&F modular type switch 16A single pole, one way, 1 module,240 volts, Cat.No 6730 of Legrand "Myrius series", complete all as specified and directed.

S&F modular universal socket 2 module outlet 6 amps 5 pin 230 volts flush type complete all as specified and directed.

S&F in replacement of modular ceiling fan step regulator 100W, 2 module, electronic step type, suitable for fan 48"/56" sweep complete all as specified and directed. Make:- Legrand "Myrius series" or equivalent make

S&F 240 V, 20 Amp Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole, 20 Amps MCB, complete all as specified and directed.

S&F piano type switch 5 Amps single pole, 240 volts, complete all as specified and directed.

S&F piano type switch 15 Amps single pole, 240 volts, complete all as specified and directed.

S&F bell push, flush type,5 amp, 240 volts, complete all as specified and directed.

S&F bell electrical ding dong including hardwood board bell push, flush type, 5 Amp, 240 volts complete all as specified and directed.

S&F ceiling rose surface type three terminals, 240 volts, complete all as specified and directed.

S&F socket outlet multipurpose 2 in 1, 5/15 amps, 230 volts flush type, complete all as specified and directed

S&F socket outlet 5 amps, 5 pin, 230 volts flush type, complete all as specified and directed.

M&L for PVC rectangular block for mounting, switches, sockets, fan regulator etc with cover laminated sheet cover of size 100mmx100mm and 50mm deep including making good of disturbed surfaces, complete all as specified and directed.

M&L for PVC rectangular block for mounting, switches, sockets, fan regulator etc with cover laminated sheet cover of size 175mmx100mm and 50mm deep including making good of disturbed surfaces, complete all as specified and directed.

M&L for PVC rectangular block for mounting, switches, sockets, fan regulator etc with cover laminated sheet cover of size 200mmx150mm and 50mm deep including making good of disturbed surfaces, complete all as specified and directed.

M&L for PVC rectangular block for mounting, switches, sockets, fan regulator etc with cover laminated sheet cover of size 250mmx200mm and 50mm deep including making good of disturbed surfaces, complete all as specified and directed.

M&L for PVC rectangular block for mounting, switches, sockets, fan regulator etc with cover laminated sheet cover of size 300mmx300mm and 50mm deep including making good of disturbed surfaces, complete all as specified and directed.

S&F in repair fan condenser 2.5 mfd 230 Volts, complete all as directed. Make :-Havells / Epcos /Siemens

S&F earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire, complete all as specified and directed.

Supply and fixing Integral LED security Light Luminaire 30 W comprising of epoxy powder coated aluminium housing, enclosed with glass cover in frame incuding with GI pipe of suitable length & dia, medium grade including with fitting and fixtures on wall complete with all accessories conforming to Cat Part No : BRP022 LED 30 CW MR S1 PSU GR of philips or of equivalent in WIPRO/BAJAJ, complete all as specified and directed.

Supply and fixing LED light fitting, 1X20 Watt surface mounted LED high efficiency LED luminare smart bright ingress protection : IP66 with acrylic cover comprises pre-wired with high efficiency electronic driver,high trnslucent frosted diffuser gets glare free, smooth light distribution, complete all as specified and directed. Make:- Philips cat no-BN021C LED20S PSU NW GR OR equivalent in Wipro/Bajaj.

M&L for earthing complete with galvanised steel earth plate electrode including necessary excavation and earth work in any type of soil with galvanized steel earth plate electrode size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of the earth plate not less than 1.50 m below normal ground level connected to with and including earth lead of 4 mm dia GI wire up to 7.50m by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of MES SSR Part-I(2009) connected to main switch board or main control board all as specified and testing on completion with & including provision of earth strip protected by galvanised iron 40 mm dia. light grade pipe up 7.50m and watering pipe shall be 20 mm bore medium grade with and including concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab in RCC (1:2:4) type B-1 using 20 mm graded stone aggregate duly reinforced with 8 mm TMT bars @100mm C/C on both sides with suitable cast iron lifting handle, GI earthing strip shall be encased in and including 50mm nominal bore GI 'light grade' tubing with all fittings from earth plate up to panel shall be provided & charcoal / salt funnel & other fittings etc. complete all as specified and as directed. Note :- (i) Unit rates includes the cost of 7.50 m GI pipe for protection of 4mm dia GI earth wire.

SARATH ENTERPRISES