GE 874/EWS-13/2024-25

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, in roof covering complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and directed.

All as per srl item No 2 above but except sheeting complete all as specified and directed.

All as per srl item No 2 above but plain sheet as in roof covering /cladding to wall fixed with tapping screws complete all as specified and directed.

Dismantling timber scantling 40 Sq. cm and over in section, in any position, unframed work.

M&L for 2nd class hard wood as in scantling, clean sawn, timber fixed complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed.

M&L for 2nd class soft wood moulding as in cornices, picture rails and like, not exc. 6 sqcm in section, wrought, fixed with nails complete all as specified and directed.

M&L for 2nd class soft wood Clean sawn battens at 30 cm centre to centre of thickness exc 5 sqcm and n. exc 15 sqcm complete all as specified and directed.

M&L for 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed in walls with Nails to timber frame work complete all as specified and directed.

M&L for 4mm thick Veneered decorative plywood , grade 1 (with BWR resin) with decorative face veneers on one faces; fixed in ceiling with nails to timber frame work complete all as specified and directed.

M&L for 2nd Class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both side fixed to frame work with secret nailed as in wall panelling 15mm including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of the surface, complete all as specified and directed.

M&L for 9mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work fixed with nails complete all as specified and directed.

M&L for preparation of newly wooden surfaces over 10 cm in width or girth and applying Two coat of synthetic enamel paint over one coat of pink primer at surfaces, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 - 8 mm thick of size 600 x 600mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles over and including 15mm thick screed bed in CM (1:4) laid over and including 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surface of size 350x250x7 mm/450x350x7mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.

Taking up or down steel tubing and connections 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore complete all as specified and directed.

S&F galvanised mild steel water tubes,15 mm bore with all fittings, 'medium grade', ISI marked, galvanised, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F galvanised mild steel water tubes, 20 mm bore with all fittings, 'medium grade', ISI marked, galvanised, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S & F in repair vitreous China wash hand basin white flat back of size 550 mmx400mm fixed on and fixing of cantilever brackets of mild steel angle 35 mm x 35 mm x 5 mm, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe (rigid quality) including fixing of tap etc. complete all as specified and directed. Note :- Pillar tap shall be measured & paid separately as supply only under respective item of BOQ and cost of fixing shall deemed included in this item".

Supply only pillar tap cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.

S&F in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15 mm bore, complete all as specified and directed.

S&F in repair bib taps long body cast copper alloy chromium plated with capstan head screwed down, screwed for iron pipe or for brass ferrule 15 mm bore of approved make complete all as specified and directed.

S&F in repair wall mixer chromium plated 15mm dia completed all as specified and directed.

S&F rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position of 500 ltrs capacity fixed with PVC tank nipples, complete all as specified in SSR Part-I including dismantling of existing tank complete all as specified and directed.

S&F rotational moulded polythene water storage tank (Cylindrical, vertical with closed top) hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples, complete all as specified in SSR Part-I including dismantling of existing tank complete all as specified and directed.

M/S GAFFARA CONSTRUCTION CO

M/S ASMATULLAH SHAH

M/S AAA CONSTRUCTIONS

BASHIR AHMED MALIK

Bidder Name

BASHIR AHMED MALIK

M/S ASMATULLAH SHAH

M/S GAFFARA CONSTRUCTION CO

M/S AAA CONSTRUCTIONS

MS SHEIKH NADEEM AKBAR