Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.9 LAccepted-AOC H NO 18 SHEET NO 5 A KATIA COLONY NAMDEV MARG BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹34.1 L+₹94,212 (2.84%)Rejected-Finance | L2 | Rejected-Finance Quoted other than lowest | |
| 3 | L3₹38.6 L+₹5.4 L (16.4%)Rejected-Finance NA | L3 | Rejected-Finance Quoted other than lowest | |
| 4 | L4₹38.6 L+₹5.5 L (16.5%)Rejected-Finance | L4 | Rejected-Finance Quoted other than lowest | |
| 5 | L5₹38.7 L+₹5.5 L (16.6%)Rejected-Finance FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L5 | Rejected-Finance Quoted other than lowest |
Tender Value
₹37.9 L
EMD Value
₹75,720
Closing Date
4 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SH ASHOK KUMAR, EE, IDSE
GE NORTH BATHINDA Pin-151004
ADDN/ALTN OF BLDG. NO P-123 LIVING ACCN FOR WOMEN POLICE UNDER AGE B/R- III and AGE E/M -V OF GE (N) BATHINDA AT BATHINDA MIL STN
2023_MES_632017_1
8938/NIT-55/23-24
Open Tender
Civil Works
Item Rate
150 days
BATHINDA
Class D category a(i)
8 documents required · 8 mandatory
₹500
GE NORTH BATHINDA
₹75,720
Yes
6 Feb 2024
9 Dec 2023
6 Jan 2024
9 Dec 2023
4 Jan 2024
26 Dec 2023
9 Dec 2023 - 15 Dec 2023
Amount
SCHEDULE 'A' B/R Works
Demolition of cement concrete reinforced up to triple storey building in parapets,chajjas, fins, fascias (reinforcement cut as required to facilitate demolition) in any description and in any position not other wise specifically provided for complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Demolition of cement concrete in ground floor, (unreinforced) paving nexc 15 cm thick(below or above GL) incl tiling if any complete all as specified and directed.
Taking down cement plaster on brick or concrete surfaces , including racking out joints , hacking for key, scrubbing down with water complete all as specified and directed.
Demolition of brick work, built in Cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar 1:3 on concrete surfaces as in sunken portion including mixing of liquid WPC in mortar @ 200ml per bag of cement of 50 Kg finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. Note: Liquid water proofing compound shall be measured and paid seperately.
Material and labour for applying two coat coats of Ultratech Seal and Dry (Hi-Flex) High Polymer Enriched Cementitious Binary Waterproofing system @ 1.2 Ltr Per Sqm complete all as per manufacturer instructions and directed by Engr-in-Charge.
M&L cement concrete 1:5:10 type E2 as in filling of sunken floor complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles and rubbish off the permises complete all as specified and directed.
M&L for coloured glazed ceramic tiles in vertical surface 350 x 250 x 7 mm/ 450X350X7mm thick set and jointed over and including 10 mm thick rendering even and rough in CM1:4 for backing of tiles, jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.
M/L for non skid ceramic coloured tiles 7mm to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 Sqm, but not exceeding 0.18 Sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed.
M&L for 25 mm thick PCC 1 : 2 : 4 type B-0 (using 12.50mm graded stone aggregate) as in floor complete all as specified and directed.
M&L vitrified ceramics tiles 10mm thick (square/ rectangular ) polished, area of each tiles n. exc 0.36 Sqm(600mmX600mm) , in floors over and including 15mm thick screed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L vitrified ceramics tiles 10mm thick (square/ rectangular ) polished, area of each tiles n. exc 0.36 Sqm(600mmX600mm) , in skirting including 10mm thick rendering in CM 1:4 for backing of tiles etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for granite (any type) 20 mm thick work(table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, counter, shelves, urinal partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:4 and moulding/rounding on edges by grinding complete all as specified and directed.
M/L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded stone aggregate in plinth protection,aprons, hard standing, path and like including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down shutters of any description exc 1.0 sqm and n.exc 2.0 sqm each complete all as specified and directed.
S & F Solid PVC door frame of size 50 mmx 47mm made out of 5 mm woodgrain printed colour PVC sheet reiforced with MS square tube and fixing in opening as per manufacturer instruction complete all as specified and directed.
S & F Solid PVC door frame of size 50 mmx 47mm made out of 5 mm plain colour PVC sheet reiforced with MS square tube and fixing in opening as per manufacturer instruction complete all as specified and directed.
S&F 105X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and as directed.
S&F 125X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and as directed.
M&L cement concrete Type B-0, 1:2:4 using 12.5mm graded stone aggregate as in filling of door frames of pressed steel and in bed blocks and like etc complete all as specified and as directed.
S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (style) with 2,4, or 6 raised panel design with 2mm thick moulded prelam woodgrain colour PVC sheet on the front face and 2mm plain colour PVC sheet on back face complete all as specifed and directed.
M&L for 35 mm thick IInd class HW rail & style factory made plain framed pannelled door shutter (two pannel) with lock rail & pannel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F for 35 mm thick IInd class HW glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars ), edges of framing plain, chamfered or rounded. complete all as specified and directed.
S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete including lugs with glazing bars, dovetailed or welded complete all as specified and as directed.
S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete including lugs without glazing bars, dovetailed or welded complete all as specified and as directed.
M&L framed work such as grills in verandah , gratings, gate, holdfast etc with ends of bars souldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed.
S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F 250mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F 100 mm steel butt hinges medium weight,cold rolled complete all as specified and directed.
S & F 150 mm size extruded aluminium alloy handles cast type anodised complete all as specified and directed.
S&F mild steel 300mm ordinary rat tail rod pattern spring including roller and roller plate fixing by welding or riveting complete all as specified and directed.
Material and labour for powder coated aluminium anodised three way track sliding windows of frames size 92mm x 31.75mm x 1.5mm thickness (section No. 20831 of Jindal) and of shutter size 40mm x 18 (with 9mm interlocking legs) x 1.45mm thick (Section No. 20737 of Jindal), section (two shutter glazed, covering half of span of opening each & one shutter skelton covering half of span of opening) including provn for making windows air tight, including 95mm aluminium handle with spring lock, stainless steel wire cloth, 0.45mm nominal dia of wire average width of aperature 1.4mm and fixed with steel wire stapples and 5mm thick plain glass including necessary fitting/fixture/aluminium snap beads, complete all as specified and directed by Engineer-in-Charge. NOTE:- Measurement shall be taken for clear opening i.e. out to out window frame as whole including all fittings and fixtures and no extra shall be paid separately.
S&F powder coated aluminium (Minimum thickness of powder coating 50 micron) as in windows and ventilator shutters, without sash bars, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles ,hinges,tower bolt, aluminium snap beading, screws etc. complete all as specified and directed by Eng- In-Charge.
Supply & fixing powder coated aluminium frame for partition doors, windows and ventilators with one or more rebates including jointing cleat for fixing etc. and aluminium anodised skelton windows & ventilator shutter fixed with glass or gauge, side hung type without sash bars using standard aluminium section including necessary aluminium grill, jointing cleats, glazing clips, rubber packing anodised aluminium snap beadings screws, anodised aluminium fittings such as handles stainless steel adjustable friction stay hinges etc. including aluminium grills fixed to window frame aluminium anodised wire cloth fixed to aluminium frame, complete all as specified and directed by Engineer-in-Charge.
Supply and fixed powder coated aluminium door shutters (Minimum thickness of powder coating 50 micron), aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, tower bolt , aluminium snap beading, screws etc complete all as specified and directed by Engr- In-Charge.
Supply & fixing powder coated aluminium grills 75mmx75mmx6mm thick, fixed to window frame including channels, accessories complete all as specified and directed by Engineer-in-Charge.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperure 1.40 mm and fixed with stainless steel wire staples fixed complete all as specified and directed.
Supply and fixing ACP sheet 6mm thick of approved colour fixed to aluminium door, partition and like complete all as specified and directed by Engr- In-Charge.
S&F Mortice lock alumunium body, vertical type of size 100mm of 4 levers etc compete all as specified and as directed
Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in Soft/loose soil.
Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed.
Returning filling in including spreading levelling watering and well ramming in layers n. exc 25 cm complete all as specified and directed.
M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation , filling, subbase and mass concrete complete all as specified and directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter complete all as specified and directed.
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, chajjas, cantilevers, shelves including supports,overhangs,etc. also splays between floors and beams, etc.complete all as specified and directed.
M&L for formwork to sides of pillars,posts, struts, piers, columns and stanchions complete all as specified and directed.
M&L for formwork to fair finished soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) Note:- Rate includes for ceiling plaster 5mm thick in CM 1:3 complete all as specified and directed.
M&L for formwork to staircases with sloping or stepped soffits including risers and stringers , landings and similar work; not exceeding 200mm thick (Horizontal or sloping)
M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
As per item No 56.00 but 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
M&L for reinforced cement concrete (design mix) as in Foundations, including rafts, footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete complete all as specified and directed.
M&L for reinforced cement concrete (design mix) as in Beams, cantilevers, bressummers, chajjas, lintels over 1.5m span complete all as specified and directed.
M&L for reinforced cement concrete (design mix) as in Columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for reinforced cement concrete (design mix) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and , parapet, in shelves and the like complete all as specified and directed.
M&L for reinforced cement concrete as in staircase chullah hoods; stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings and the like complete all as specified and directed.
M&L for brick work with subclass ‘B’ bricks,(old size bricks) straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.
M&L for brick work with sub class ‘B’ (modular size bricks) straight or curved on plan any radius in half brick thick walls, built in CM 1:4 all as specified and directed.
M&L for rendering 15mm thick in CM (1 : 6) on brick work or concrete surfaces finished even & fair complete all as specified and directed.
M&L for rendering 15mm thick in CM (1 :4) on brick work or concrete surfaces on wall /roof finished even & fair complete all as specified & as directed. Note:- Water proofing compound will be measured separately.
M&L for 5mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling, chajjas including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.
Supply only liquid water proofing compound complete all as specified and as directed.
M&L preparing newly plastered surfaces of wall, pilasters, comices etc and applying two coat of water based exterior emulsion over and including a coat of primer over a coat of white cement based putty as Approved by GE complete all as specified & as directed. Note:- Putty will be measured separately under appropriate item.
M&L preparing newly plastered surfaces of wall, pilasters, comices etc and applying two coat of oil bound distemper over a coat of white cement based putty complete all as specified & as directed. Note:- Putty will be measured separately
M&L for applying 2mm thick one coat of white wall care putty on walls complete all as specified and directed.
M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in (soft/loose soil) including removing excavated soil to a distance n.exc 50mtr complete all as specified and directed by Engr-in-Charge.
M&L for excavating in Post holes soft/loose soil (or similer holes) not exc 0.50 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cum watering and including removing excavated soil to a distance not exc 50 m and making good surface complete all as specified and directed by Engr-in-Charge.
M&L for cement concrete type C-1 (1:3:6) (using 20mm graded aggregate) as in postholes, foundations, filling and mass concrete, side kerb, haunching and like complete all as specified and directed by Engr-in-Charge.
S&F for Pre -Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm Thickness of any colour having aTensile strength of 550 MPA as in roof covering fixed with 'L' type or 'J' type or cranked hook bolts all as specified and directed by Engineer-in-Charge.
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
S&F for fibre glass reinforced translucent sheeting fixed with coach screw and washer in roof, wall /cladding to wall and like complete all as specified and directed by Engr-in-Charge.
S&F mild steel work as in tubular (round/square/rectangular shape of pipes as approved by Engr-In-Charge) trusses, purlins, rafter, MS plates,connecting plates, up to height 10mtr including post special shaped washers etc complete incl necessary nut bolts, wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 grade St-240 complete all as specified and directed by Engr-in-Charge.
M&L preparation of new steel surfaces & applying two coats of synthetic enamel paint over one coat of red oxide primer over 10cm width or girth all as specified.
M&L for Machine cut kota stone slab flooring18-20 mm thick, as in riser, tread, landing, floor over and including 15mm thick screed bed in CM 1:4 etc set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing etc complete all as specified and directed.
S&F mild steel work as in staircase railing, hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including fixing in steps, walls, securing bolts including all accessories complete all as specified and directed by Engr-in-Charge.
S&F table top/couner top vitreous china one piece wash hand basin 600x360x95mm with accessories fixed complete all as specified and directed Make :- ARS WHT-39903 in Jaquar or equivalent as per Appx 'A'
S&F brass CP single lever basin mixer for mixing hot and cold water screwed down for iron pipe and complete all as specified and directed by Engr-in-charge. Make : KUP-35051BPM in Jaquar or equivalent as per Appx 'A'
S&F toilet paper holder CP of standard quality and size complete all as specified and as directed. Make : AKP 35753PS in Jaquar or equivalent as per Appx 'A'
S&F corner glass shelf (with bracket) made up of glass 30 cm in size complete all as specified and as directed by Engr-In-charge. Make : ACN-1173 in Jaquar or equivalent as per Appx 'A'
S&F sheet glass shelf assembly (with bracket) consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engr-In-charge.
M&L for hardcore of Broken stone or boulders of gauge n exc. 63 mm, deposit-ed, spread and lev-elled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping including slightly rounded or chamfered angles and including necessary form work complete all as specified and directed.
M&L for sand filling under paver block including consolidation complete all as specified.
M&L for machine pressed pre cast concrete paver block reflective type any shape and size of 60mm thick M-35 gde with grey cement and pigments complete all as specified and directed.
M&L for 150 mm bore salt glazed stone ware drain pipes laid in trenches and jointed including taking down old pipe complete all as specified and directed.
M&L for cement concrete 1:4:8 type D2, concrete bed to drain pipes 100 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified and directed.
S&F Aluminium (extruded section body) door closer hydraulically regualted, designation No 3 universal type, suitable for door shuttes of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr in charge.
M&L for precast cement concrete Type B1 1:2:4 (20mm graded aggregate) as in landings, cover slabs, precast man hole covers, set in CM 1:6 complete all as specified and directed.
S&F 25mm dia curtain rails, mild steel, chromium plated with fixing fancy type brackets, side knob, stops rollers etc complete all as specified and directed.
Cutting into existing manholes for connecting new drains150mm dia pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.
M&L for complete removal of old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent, salts and treating oil and greasy spots and applying two coats of exterior water base emulsion paint over a coat of primer on walls complete all as specified and as directed.
M&L for complete removal of existing treatment from walls and applying two coats of oil bound distemper complete all as specified and as directed.
As per Item No-100 here-in- before but on ceiling complete all as specified and as directed.
M&L for preparation of old or previously treated surfaces wood/wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old or previously treated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat synthetic enamel paint complete all as specified and directed.
S&F in repair Prelaminted particle board 12mm thick exterior grade prelaminiated one side with decorative choice laminationand other side balancing white fixed with screws to timber frame work as in studt tablle, book case, cup board, shelves etc including taking down old board complete all as specified and directed by Engr-in-Charge.
M & L for Plain filets, square , rectangular or triangular in section clean sawn with nails or brads of 2nd class soft wood as in cabinet frame area exceeding 6 sqcm and not exc 13 sqcm complete all as specified.
S&F continuous piano hinges mild steel bright finish or electrogavanised with flaps 30mm ( when open ) wide complete all as specified.
Supply and fixing drawer brass handles, projecting drop ( 50 mm to 65 mm) on screwed plate complete all as specified.
S&F magnatic catcher fixed with nut/ screw complete all as specified and directed by Engr In Charge
S&F 500mm long pull/push MS roller for drawers complete all as specified and directed by Engr In Charge
M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each pane including hacking out old broken glass if any complete all as specified and directed.
S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperure 1.40 mm and fixed in steel window with mild steel patti by welding/ riveting/bolting fixed complete including taking down old wire cloth complete all as specified and directed by Engr-in-Charge.
S&F in repairs syphonic action type PVC low level flushing cistern 10 ltrs capacity incl 32mm dia flush pipe and fixing to supply pipe including PVC connection 600 mm long 15 mm bore with brass heads & washers with connections fixed in repairs complete all as specified and directed.
S&F in repairs 15 mm bore stop cock,(angle valve) cast copper alloy, fancy type, chromium plated, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repairs 15 mm bore Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.
S&F in repairs 15 mm bore stop cock, cast copper alloy, chromium plated with long shank and cut (concealed type), screwed down, screwed for iron pipe or union complete as specified and directed.
S/F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete all as specified and directed.
S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified & directed.
Taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F 20 mm GI tube medium grade concealed inside with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Taking up or down 15 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F 15 mm GI tube medium grade concealed with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
S&F in repairs vitreous china squatting pan "Orissa Pattern" size 580mm x 440mm white with integral foot rests, including prov of cement concrete bedding and 'P' or 'S' trap as required complete all as specified and directed.
S&F vitreous china wash down water closed pan(pedestal Pattern), white(excluding fixing bolts, flushing cistern and flush pipe) and including plastic seat cover complete all as specified and directed.
S&F health faucets CP with 1.00 mtr long CP flexible pipe and hook fixed complete all as specified and as directed.
S&F 100mm dia CP grating complete all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in walls/ laid in trenches/floors including taking down old pipe with fittings complete all as specified and directed.
S&F in repair PVC (SWR) bends any radius 110 mm dia complete all as specified and directed. .
S&F in repairs 75mm dia cast iron floor/Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.
S&F in repair 100mm bore soil waste and vent pipes CI ( sand cast) in any lengths with or without ears fixed on walls with stack clamp of flat iron at fixed interval as directed by Engr-in-Charge or under floors with cement joints including taking down old CI pipes with fittings complete all as specified and as directed by Engr-in-Charge.
S&F in repair 75mm bore soil waste and vent pipes CI ( sand cast) in any lengths with or without ears fixed on walls with stack clamp of flat iron at fixed interval as directed by Engr-in-Charge or under floors with cement joints including taking down old CI pipes with fittings complete all as specified and as directed by Engr-in-Charge.
S&F in repair 100mm bore cast iron plain bends Tapers etc complete all as specified and directed.
S&F in repair 75mm bore cast iron plain bends Tapers etc complete all as specified and directed.
S&F in repair 100mm bore CI single branch pieces equal or unequal with oval access doors complete all as specified and directed.
S&F in repair 100mm bore cast iron cowls complete all as specified and directed.
S&F 75mm bore cast iron cowls complete all as specified and directed.
S&F 1000 Ltr rotational moulded polyethylene water stotage tanks ( cylinderical verticle with closed top) hoisted & fixed in position including taking down old tank complete all as specified and directed.
S&F in repair 500 Ltr rotational moulded polyethylene water stotage tanks ( cylinderical verticle with closed top) hoisted & fixed in position including taking down old tank complete all as specified and directed.
S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs 20 mm bore gun metal or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F soap Dish CP fancy type of standard quality and size complete all as specified and as directed.
S&F 15 mm bore 2 way bib cock with flange , chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed. Make :KUP-35041 PM in Jaquar or equivalent as per Appx 'A'
M&L for 15mm thick rendering in cement mortar 1:4 on roof surfaces as in including finishing the surfaces even and smooth without using extra cement mixed with water proofing compound complete all as specified and as directed. Note: Liquid water proofing compound shall be measured and paid seperately.
M&L for provn of water proofing roof treatment to accessible/Non accessible RCC roof with APP modified membrane with non woven polyster reinforced wt not less than 3 Kg/Sqm of thickness not less than 3 mm having thermal insulation with white mineral/ gravel finish on upper side of membrane uniformely embedded during manufacturing process . All as per following specifications: (a) The surface of the roof, parapet and gutters, drain mouths etc. over which water proofing treatment is to be applied shall be cleaned of all foreign matters such as fungus, mass, dust etc. by wire brushing and dusting. For cast iron drain outlets the grove shall be cut around to tuck in the treatment as pipes, chimneystacs etc. and other similar situations to ease up about corners. (b) Bituminous primer conforming to IS : 3384-1965 @ 0.30 Kg/Sqm to be applied an prepared surface till the surface is properly impregnated. (c) APP modified water proofing membrene as specified shall be laid on the primer surface by torch application method as per manufacturers instructions, The overlaps while torching shall be 100 mm in both directions(longititudinal and transverse directions). All overlap joints shall be sealed throughly by thermofusing both the membrene layers and sealing it with the help of hot trowel. The overlap joints shall be made as monolithic layer.
M&L for precast machine pressed cement concrete tiles with grey cement and no pigments of size 250x250x20 - 25mm thick conforming to IS 1237-1980 set in cement slurry laid jointed and pointed in neat cement slurry including bedding layer of 15mm thick screed in CM 1:4 as in roof complete all as specified & directed.
SCHEDULE 'A' ELECTRIFICATION WORKS
Taking down carefully existing unserviceable copper/aluminium point wiring (light/fan/socket or power point) complete with all accessories such as hylum sheet, switches, sockets, ceiling rose, wall brackets, regulator gang boxes etc & making good distrubed surfaces of walls/floor etc and matching with existing surface all as specified and directed by Engr - in- Charge
Material and labour for concealed sub main wiring with 6 Sqmm single core (Two run) FRLSH PVC insulated multistrand copper conductor drawn through existing PVC conduit, independent circuit from DB and including one run 6 Sqmm FRLSH PVC insulated unsheathed multi strand copper conductor continues as earth wire connected to earth dolly etc. including taking out old sub main wiring of any conductor any size from conduit and making good disturbed surfaces of walls as per original complete all as specified and as directed by Engineer-in-charge. Note :-Three run of 6 sqmm copper wire shall be measured as one RM length for payment.
Material and labour for concealed point wiring complete with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through and including PVC rigid conduit 20mm dia( heavy duty ) with all fittings and all accessories i.e pipe bend pipe hook, elbow,junction box, pressed steel powder coated sunken boxe of suitable size (min 60mm deep, suitable length and 1.2mm thick ), 3mm thick bakelite plastic laminated sheet for mounting switches and socket ,fan regulator, for light/fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good distrubed surface of wall/ceiling/floors etc by using CM (1:3 ) to matching with existing surface, complete all as specified and directed by Engineer-in-charge.
All as per item No 152 here in before but for socket outlet 5 pin 5 Amp on same board, complete all as specified and as directed by Engineer-in-Charge.
All as per item No 152 here in before but for socket outlet 5 pin 5 Amp on independent board but not below the switch board, complete all as specified and as directed by Engineer-in-Charge.
All as per srl item No 152 here-in-before but socket out let one 6 pin, 6/16 Amps, 2 in 1 with cable 2.5 Sqmm multistranded copper conductor FRLSH cable on the independent board including provision of 2.5 Sqmm PVC insulated copper conductor FRLSH cable continuos as earth wire connected to earth dolly conductor etc., complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Socket outlet multipurpose, 2 in 1, 5 pin, 5/6 Amps, flush type, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing switch piano flush type, single pole, one way, 5/6 Amps ISI mark, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing switch piano flush type , single pole, one way, 15/16 Amps ISI mark, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Socket outlet multipurpose , 2 in 1, 5 pin, 15/16 Amps, flush type, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Fan regulator Electronic step type (1-4), socket type 230- 240 volt AC supply, complete all as specified and directed by Engineer-in-charge.
Supply and fixing ceiling rose surface type polycarbonate, isolated body two to three terinal,, tpline series 20 x 50mm, 6 Amps, three terminal, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in replacement (concealed in wall or as directed) factory made DB (made out of CRCA sheet) SPN, 12 Way 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including taking down unserviceable old DB any typeand including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge.
Supply and fixing in replacement (concealed in wall or as directed) factory made DB (made out of CRCA sheet) SPN, 8 Way 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including taking down unserviceable old DB any typeand including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge.
S&F in replacement of angle/batten lamp holder on PVC square Blocks with PVC insulated body complete all as directed
M& L in replacement Self ballast LED retrofit Lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K Complete all as directed.
S&F in replacement of Vertical TPN 6 way double door suitable for MCCB 125 Amp 26 KA four pole as incomer and out going MCBs and should be IP 43 protected with Copper BusBars, Neutral Links, Earthing bar all as specified and directed. including taking down old UNSV DB/MCB any type. Note:- (i) MCBs shall be measured and paid separately. (ii) TPN DB and MCCB should be of same make.
S&F in replacement MCCB 4 pole, 415 Volt fixed thermal and fixed maganatic setting of cap 125 Amps 25KA ICS=100% ICU
Supply and fixing in repair MCB SPN 32 Amps, 10 KA 'C' curve 240 V AC, 50 Hz including necessary attachment, complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair MCB SPN 40 to 63 Amps, 10 KA 'C' curve 240 V AC, 50 Hz including necessary attachment, complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement MCB SP suitable for 230 volts AC supply 6 to 32 Amps, SP rupturing capacity not less than 10KA, C Curve ISI Marked, 1 Module, including taking down unserviceable old MCB, complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement new generation energy saving ,wall mounted LED Tube light batten fittings , extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED power factor > 0.95, 100 lumen/watt duly fitted on pvc square block 5700K (4' ft long ) with LED rod 20 watt, 230 Volts 50 Hz. complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete power factor > 0.95, 100 lumen/watt, CCT min 5700K complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Earthing complete with galvanised iron earth plate electrode of size 60cm x 60cm x 6.3mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including earth continuity GI wire 4 mm (upto test point from earth plate i.e. 7.5m min) by means of GI bolts/nuts/washers and including protected by 15mm dia GI light grade protection pipe from earth plate to test point, including making of test point. Earth plate shall be surrounded by packed layer of char coal/coke & salt all around bottom and top with alternative layer. 20mm GI light grade pipe for watering (should be 10cm above GL) and including socket, plug, funnel, wire mesh, RCC cover and (including steel for cover) PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in earthing pit including necessary form work, excavation & earth work, all as specified & shown in electrical plate No. 3 of SSR (Part – I) including taking out/dismantling old unserviceable earthing system complete all as directed by Engineer-in-charge. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner.
Supply and fixing Wall mounted high flow fan 400mm sweep single phase, 230 Volts 50 Hz double ball bearing energy efficient, three curvy Pvc blades with fine finishing, rigid frame for protection from foreign matters/sturdy close-mesh guards including fixing material including electrical connection, complete all as specified and directed by Engr-in-Charge.
S & F wall mounted study lamp bidirectional type pre-wired with lamp holder B22 base suitable for LED lamp 3 watt candle type complete.
M & L for LED Mirror light fitting of 9/10 watt, 6000 K , lineer & compact with decorative grey end caps,polycarbonate body and ribbed opal diffuser complete with lamp and all other accessories fitting arrangement including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector all as specified and directed.
Supply and fixing of exhaust fan PVC body 300 mm sweep (BEE, 5 star rated) with louvres, 230V, single phase AC supply, hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface as per existing surfaces, and connection to fan with suitable flexible twin core round copper wire complete all as specified and directed by Engineer-in-Charge. Note :- (i) Srl Number of exhaust fan and 'GE North BTD' shall also be writing on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge. (ii) Exhaust fan installed/hanging at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account.
Making holes for 250 mm dia exhaust fan of suitable shape & size into or through brick walls at ground/First/second floor including plastering for making good to the original surfaces of any description disturbed including painting/distemper matching with the existing colour. Note :- Rates are deems to be including charges of any type of T&P, Insurance of staff deployed at site.
Supply, laying and testing cable for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 2 core including taking down unserviceable Service cable from pole to bldg all as specified and directed.
RAKESH KUMAR GARG & CO.
M/s Vandana Builders
B D BATRA AND SONS
Ajay Enterprises
M K Enterprises
ANNPOORNA ENGINEERS & BUILDERS
M/S SAI BUILDERS
M/s DHEERAJ JAIN CONSTRUCTION COMPANY
M/S VERMA BUILDERS & DEVELOPERS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .