Renovation of PG student rooms in CRI building at ACTREC

Amount

Civil Work

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 2 coats

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content along with crack filling if required.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing and fixing Roller blinds of the size of windows that are opaque/translucent as per instructions of EIC with the string-driven mechanism. Sample approval is mandatory before execution.

Providing and fixing Sun control film as per instructions of EIC

Hardware fixtures and fittings : Providing and fixing or replacing fittings such as fixture/Z section hinges, handles, silicon and other required materials by removing the old fittings at various locations including cost of all other materials labour and necessary allied works and handing over the old material to the Dept. all complete as specified and directed by engineer in charge.

Providing & fixing approved quality machine pressed phenol formaldehyde bonded commercial/marine ply wood of approved size and fixing the same with necessary nails/screws/adhesive in partition cupboard shelves/ktichen cabinets/flush doors etc. at all floors and locations in quantities as required at site in following thickness including 6 mm thick T.W.lipping patti at all exposed edges with nails/screws/hardwares/adhesive wastage in cutting , transportation etc. complete all as directed by the Engineer-In-Charge. (19mm thick ply)

Providing & fixing 1.5mm thick approved laminate of requiredcolour over existing surfaces along with the adhesive all as required specification design etc. complete as specified and directed by Engineer-In-Charge.

Repairing of pedistrial, parition, HT storgae unit etc. complete as specified and directed by Engineer-In-Charge.

Replacement of seat and back cushion, foam and cotton cloth of chairs with polish/ paint as directed by engineer in charge.

Floor polishing : Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete as dircted by engineer in charge.

Power points

Supply, fixing, testing, and commissioning of 24W Square, surface-mounted LED lighting fixture.

SITC of 8W, 2' long surface type LED lighting fixture

Wiring for circuit/ sub main wiring along with earth wire with the 2.5 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed conduit as required.

Wiring for circuit/ sub main wiring along with earth wire with the 1.5 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed conduit as required.

Fixing of PVC conduit/ Truncking. Supply & Fixing of PVC rigid conduit of 25mm size with spacers & saddles screws, rawal plug etc. along with all accessories complete in all respect on any hard surface/wall/trench/ceiling etc. Compete as per instruction of EIC.

SITC of 5/15 Amp, Modular switch

SITC of 6 Amp, Modular switch

SITC of 5/15 Amp, 5 pin Modular socket.

SITC of Modular fan regulator (2 module size)

Supply and fixing of 12 way Concealed ( MS ) boxes for modular accessories

Supply and fixing of 8 way Concealed ( MS ) boxes for modular accessories

Supply and fixing of 1or2 way Concealed ( MS ) boxes for modular accessories

Supply and fixing of 12 way FACE PLATE for modular accessories

Supply and fixing of 8 way FACE PLATE for modular accessories

Supply and fixing of 1 or2 way FACE PLATE for modular accessories

Providing, fixing & commissioning of 1200 mm sweep ceiling fan including down rod, double ball bearing, etc all as per instructions and as directed by E-I-C.

OLO Housing Infra LLP (BID ID -3150789)