REPAIR TO AREA, DRAINAGE, PATH HARD STANDING, FENCING AND SECURITY WALL AND MISC WORK AT HBTC MARVE, REPAIR / REPLACEMENT OF SEWAGE LINE MANHOLES AND DRAINAGE DRAINS INCLUDING DRAIN COVER AND CLEANING OF SEPTIC TANK MANHOLES SEWAGE LINE AT MALAD KAND

Amount

Demolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Plain Cement Concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation / mass concrete/filling complete all as specified and as directed by the Engineer-in-charge

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan, exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Pre-cast cement concrete block masonry 1:3:6 type C1, (using 20mm graded stone aqggregate), with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Plain Cement Concrete 1:3:6 type C2 using 40mm graded stone aggregate as in surface channel for drain complete all as specified and as directed by the Engineer-in-charge

M & L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete with using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

Material and labour for 15 mm thick plastering in cement mortar (1:6) on brick/concrete surfaces & finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including tiles and removal of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 75 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in flooring, path/hardstanding and finishing the surface even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for machine pressed precast concrete interlocking paver block, of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment including 25mm thick crushed stone sand cushioning including watering and consolidation below paver block complete all as specified and as directed by Engineer-in-Charge. Make: Mehtab Tiles/Indore/M/S Ultra Tiles/NITCO/Topaz Tiles/Navya Tiles Jodhpur

Material and labour for chequered cement concrete tiles(glossy finish) 20cm x 20cm x 25mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. Make- (a) M/S Mehatab Tiles, Indore (b) National Tiles(c) Bharat Tiles and Engg Coy, Bangalore (d) Modern Tiles and Marbles Bangalore (e) M/s NITCO, Mumbai (f) Ultra (g) Duracrete

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed by Engineer-in-Charge..

Material and labour for 100mm thick Plain Cement Concrete 1:2:4 type B1, using 20mm graded stone aggregate as in sub base of flooring and finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge

Material and labour for forming contraction (Dummy) joints, 30mm deep x 10mm wide, filled with sealing compound Gde ‘A’ complete all as specified and as directed by Engr-in-Charge.

Material and labour for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for slab thickness of concrete slab 100mm complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Material and labour for preparation of new plastered surfaces of wall & applying two coats of cement based paint over a coat of primer upto a height of bldg roof including formwork/scaffolding/ladders and safety belts with precautions etc complete all as specified and as directed by Engineer-in-Charge.complete all as specified and as directed by Engineer-in-Charge. Make : Snowcem/Duracem/Aquacem/Berger/Shalimar

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges & removing clear off site complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets/TATA

Dismantling wrought iron or mild steel work of any description not otherwise provided for & removing clear off site complete all as specified and as directed by Engineer-in-Charge.

Dismantling fencing wire mesh complete all as specified and as directed by Engineer-in-Charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in concrete, including taking out embedded portion and making good disturbed ground complete all as specified and as directed by Engineer-in-Charge.

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and removing surplus soil to a distance not exceeding 50 m and depositing where directed and making good the disturbed surface complete all as specified and as directed by Engineer-in-Charge.

M & L for PCC 1:3:6 Type C-2 using 40 mm gradded aggregate Cement concrete in foundations, filling and mass-concrete complete all as specified and directed

Supply and fix Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to conforming to Fe-290 Grade E-165 complete including all as specified and directed by Engineer in charge.

Material and labour for Mild Steel screw bolts(Machine made), exceeding 5cm and not exceeding 10cm long, dia of neck 11 to 16mm complete all as specified and as directed by Engineer-in-Charge.

Supply only mild steel round bars as line bars for fixing chain link fencing complete all as specified and as directed by Engineer-in-Charge

Supply only Chain link fencing of size 50x50mm mesh size made of 10mm dia GI wire, streched and fixed to fencing post all as specified and directed by Engineer-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed by Engineer-in-Charge

Material and labour in repairs for galvanized 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provn of galvanized mild steel wire staples or steel pins etc as directed (each line of wire to be measured), complete all as specified and as directed by Engineer-in-Charge.

Refixing/ Resecuring /erecting old displaced/ bend angle iron fencing post by placing PCC 1:3:6 type C2 (using 40mm graded aggregate) including demolition of existing PCC aroung fencing post complete all as specified amd as directed by Engineer-in-charge.

Clearing the area/site including cutting of bushes/shrubs etc and making good the site complete all as specified amd as directed by Engineer-in-charge.

Supply and fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to conforming to Fe-410-W (Gde-E-250) quality-B complete all as specified and directed by Engineer in charge.

Material and labour for MS framed work such as grills , gratings, brackets of chajja etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, framed work of garbage bin, barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and similar work conforming to FE 290 Gde 165 etc. complete all as specified and as directed by Engineer-in-Charge.

Material and labour for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, holstring courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, kerbs, water troughs, bed plates, concrete block for hold fast etc and the like including necessary form work for fair finished surfaces including weathering, slightly rounded or chamfered angles and throating, setting in CM 1:4 as directed etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparing new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed by Engineer-in-Charge. Make: Make : Asian Paints/ Nerolac Paints/ Dulux ( Akzonobel)/ Nippon Paint India Pvt Ltd/Birla Opus Paints

Supply and fix razor type concertina coil, SG hot galvanized spring tensile wire, 145 to 150 newton per sqmm, zinc coating 250-300 gm per sqm, dia of coil when unstreched 600mm, minimum No of coils 10 per running meter after laying, hot dipped razor ribbon tape of size 0.50 mm thick, 19mm wide before wrapping on central core wire, fixed with 1.66 mm thick GI clips 25 Nos, per running metre and special nut bolts for holding 'Z' coils together and extra two rows parallel wire of 10 gauge complete all as specified and as directed by Engineer-in-Charge . Note :- The length shall be measured along the centre-line of the perimeter of fencing.

Material and labour for granite work 15-16 mm thick machine cut, makrana colour/white, table rubbed and polished, bedded and jointed as in steps, jambs, pillar, window cills, cooking platform and like bedded and jointed with grey cement slurry and pointing in white cement 1:2 using marble dust with admixture of pigment to match including 20mm thick screed bed/rendering coat in cement mortar 1:4 etc complete all as specified and as directed by Engineer-in-Charge.

All as per item No 38 described here-in-before but except stone complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in deep for foundation, laying pipes etc or for shaft, walls, manholes, pier holes etc not exceeding 10 sqm on plan and not exceed 1.5m in depth and getting out in any type of soil complete all as specified and as directed by Engineer-in-Charge

Material and labour for Excavation in trenches not exceeding 1.5m wide and exceeding 1.5 m in deep but not exceeding 3.0 m in deep for foundation, laying pipes etc or for shaft, walls, manholes, pier holes etc not exceeding 10 sqm on plan and not exceed 1.5m in depth and getting out in any type of soil complete all as specified and as directed by Engineer-in-Charge

Returning, filling in including spreading, levelling, watering and well ramming soil in layers not exceeding 25 cm thick complete all as specified and as directed by the Engineer-in-Charge

Removing excavated material to a distance exceeding 1.5 Km but not exceeding 5 Km, outside MD land and depositing complete all as specified and as directed by Engineer-in-Charge.

M&L for site clearance/ surface dressing n exc 30cm and averaging 15cm deep in hard/dense soil including cutting of grass and small trees etc complete all as specified and as directed by Engineer-in-Charge.

Excavation over areas n. exc 1.5 m in deep and getting out in soft and loose soil and removal outside MD land complete all as specified and as directed by Engr-in-Charge

Material and labour for reinforced concrete pipes, 150mm bore with collars, class NP-2, laid in trenches and jointed in cement mortar 1:2 with spun yarn etc complete all as specified and as directed by Engineer-in-Charge. Make : Indian hume pipes/ Everest/ Himalaya/ Thuluvananikal Pipes

Material and labour for reinforced concrete pipes,200mm bore with collars, class NP-2, laid in trenches and jointed in cement mortar 1:2 with spun yarn etc complete all as specified and as directed by Engineer-in-Charge. Make : Indian hume pipes/ Everest/ Himalaya/ Thuluvananikal Pipes

Material and labour for cement concrete 1:3:6, type C2 (using 40mm graded stone aggregate), as bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in as specified in Clause 18.68 of MES schedule Part I, bore of pipe 150mm bore of pipe complete all as specified and as directed by Engineer-in-Charge

Material and labour for cement concrete 1:3:6, type C2 (using 40mm graded stone aggregate), as bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in as specified in Clause 18.68 of MES schedule Part I, bore of pipe 200mm bore of pipe complete all as specified and as directed by Engineer-in-Charge

Material & Labour for cutting into existing manholes for 150mm internal dia of pipes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1, smooth finished and reforming benching as required complete all as specified and as directed by Engineer-in-Charge.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including necessary scaffolding arrangement (reinforcement cut as required to facilitate demolition) and removing concrete debris and depositing outside MD land all as specified and as directed by Engineer-in-Charge.

M & L for Hard core of broken stone boulders guage not exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick watered and framed to a true surface complete all as specified and as directed.

Material and labour for 100mm thick cement concrete (1:2:4) type B1, using 20mm graded stone aggregateas in sub base of flooring/ hard standing, path, in alternate bays, area not exceeding 2 Sqm each panel and joints filled with bitumen mastic (1:3) and finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 75mm cement concrete (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection and finishing the surface even and smooth without using extra cement including joints in plinth protection to be filled with bitumen mastic (1:3) as specified and as directed

Material and labour for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface channels and drains, benching, haunching etc. including necessary form work for fair finished surfaces complete all as specified and as directed.

M & L for precast reinforced cement concrete with nominal mix, 1:2:4, type B1 using 20mm graded stone aggregate as in landings, cover slabs, chajjas etc. and similar articles with plain faces, set in CM 1:4 including necessary form work complete all as specified and as directed by Engineer-in-Charge

Material and labour for rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, and fastenings and heavy bracket framing, (beam, tee, angle, channels or flat sections) including notching, drilling, fitting, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts) conforming to Fe 410 W Gde E- 250, Quality B complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / INDALCO / TATA/HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets

Material and labour for Mild Steel screw bolts(Machine made)with hexagonal or square heads at one end and screwed the other, not exceeding 5cm long, dia of neck 16mm complete all as specified and as directed by Engineer-in-Charge.

S&F hilti wedge anchor fastner, 12mm dia 100mm long or similar approved make fixed with anchor grout lokfix E77 or approved make of similar characteristics, the thixotropic nature of lokfix polyester resin grout P reduces flow of grout out of the hole, in overhead or horizontal holes incl. drilling holes of required sizes cleaning with the same with air pressure and filling with chemical as secified above placing of MS plate of required size and shape and drilling/ fixing the anchor bolt fastner complete all as specified and directed by Eng-in-charge. Note:- All MS items weight will be measured seperatly.

Material and labour for 10 mm thick plastering in cement mortar (1:4) on brick/concrete surfaces & finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 15mm thick plaster in cement mortar (1:4) on external surfaces of the brick, PCC block or concrete surfaces, mixed with waterproofing compound @ 3% by weight of cement or as per manufacturer's instructions and finishing the surfaces even and smooth without using extra cement , upto the height of bldg roof including necessary formwork/ scaffolding /ladders and safety belt etc complete all as specified and as directed by Engineer-in-Charge.complete all as specified and as directed by Engineer-in-Charge. Note: waterproofing compound shall be measured and paid separately

Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit

Supply and fix mild steel TMT bars, 8 to 12mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Supply & fix mild steel round bars Fe-410-W 432 (Part I) (Gde.E-250) Part- I quality-A or Fe 290 (Gde -E-165) 6 to 8mm dia and over as in rungs, cut to length bent to shape required etc complete all as specified and as directed by Engineer-in-Charge

Material and labour for cleaning of manholes not exceeding 2.0 Sqm in plan and upto 0.5metre depth including pumping out liquid sludge/waste materials, removing all solid materials such as stones, bricks, pipes, plastic articles etc., from the manholes / chambers, plugging or diverting of flow if required including taking all precautionary and safety measures such as gas mask, use of safety belt and cell torch for lighting inside manholes spreading bleaching powder on the silt removed to avoid bad smell including cleaning of surrounding area of manhole upto 1.0m from the edges etc complete all as specified and as directed by Engineer-in-Charge.

All as per item No.66 described here-in-before but depth exceeding 0.50 metre but not exceeding 1.0 metre complete all as specified and as directed by Engineer-in-Charge.

All as per item No.66 described here-in-before but depth exceeding 1.0 metre but not exceeding 1.50 metre complete all as specified and as directed by Engineer-in-Charge.

All as per item No.66 described here-in-before but depth exceeding 1.50 metre complete all as specified and as directed by Engineer-in-Charge. Note for item No 66 to 69 : Solid contents/materials, silt etc obtained from cleaning shall be removed outside MD land and contractor's quoted rate shall be deemed to be included for this provision.

Systematically cleaning of the blockage of water closets, bath rooms, nahani traps, floor traps and gully traps of any type and size/depth and removing all silts and solid materials to out side MD land etc complete all as specified and as directed by Engineer-in-Charge.

Systematically cleaning of the sewage and waste water line pipes 100mm / 75mm dia fixed to walls vertically, by passing ropes, Knots, bamboo/wire/kandi rotary cleaner etc., at any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.

Systematically cleaning of the sewage lines including gully traps by passing ropes, Knots, bamboo/wire/kandi rotary cleaner etc for dia of sewage pipe 150mm complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 72 described here-in-before but for dia of sewage pipe 200mm complete

Removing manhole cover of any type / size / thickness and cleaning manhole chamber of any shape & size not exceeding 1.50m deep by removing sludge / mud from manhole and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge Note: For item no. 66 to 74. -(i) Complaint shall be completed within 6 hours of the same day of raising. In case nature of Job is such that the work cannot be done within the stipulated time period, same shall be brought to the knowledge of JE/AGE and period shall be decided by EIC. Any delay in attending the complaint shall attract a penalty of Rs 300/- per complaint per day. (ii) Safaiwala/Sewage cleaner shall report to concern JE/AGE in Malad Sub division daily and get the job card for carrying out the work. The job card shall be returned to concern JE/AGE on completion of job.

Material and labour for cleaning of septic tank (250 users) (hume pipe / masonry), by opening cover, pumping out liquid sludge/waste materials, taking out sludge night soil etc and taking off the waste outside MD land as per BMC rules and placing the existing cover in original position making good the joints and taking all precautionary and safety measures such as gas mask, use of safety belt and cell torch for lighting inside septic tank, including spreading bleaching powder on the silt removed to avoid bad smell complete and removing the same out side MD land after drying complete all as specified and as directed by Engr-in-Charge.

All as per item No.75 described here-in-before but capacity of septic tank 150 users complete all as specified and as directed by Engr-in-Charge..

All as per item No.75 described here-in-before but capacity of septic tank 100 users complete all as specified and as directed by Engr-in-Charge..

All as per item No.75 described here-in-before but capacity of septic tank 50 users complete all as specified and as directed by Engr-in-Charge..

All as per item No.75 described here-in-before but capacity of septic tank 25 users complete all as specified and as directed by Engr-in-Charge..

Supply & Fix in repairs salt glazed stoneware gully traps, square/rounded mouthed type ' P 'of size 150 x 150mm including CI grating and setting in PCC 1:2:4 type B1 and jointing to drain with CM (1:1) complete all as specified and as directed by Engr-in-Charge

Supply and fix in repairs PVC (SWR), type B, single socketed in any length with rubber ring joints, 75mm dia, laid in trenches or floor including scaffolding and upto 4th floor height complete all as specified and as directed by Engineer-in-Charge.. Make: Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral

Supply and fix in repairs PVC (SWR), type B, single socketed in any length with rubber ring joints, 110mm dia, laid in trenches or floor including scaffolding and upto 4th floor height complete all as specified and as directed by Engineer-in-Charge.. Make: Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral

Supply and fix PVC (SWR) bends any radius, 110mm bore including scaffolding and upto 4th floor height complete all as specified and as directed by Engineer-in-Charge Make :Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral

Supply and fix PVC (SWR) bends any radius, 75mm bore including scaffolding and upto 4th floor height complete all as specified and as directed by Engineer-in-Charge Make :Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral

Supply and fix PVC (SWR) vent cowl 110 mm dia complete all as specified and as directed by Engineer-in-Charge. Make : Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral

Supply and fix PVC (SWR) vent cowl 75 mm dia complete all as specified and as directed by Engineer-in-Charge. Make : Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral

Supply and fix PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge. Make :Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral

Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed by Engineer-in-Charge. Make : Jaquar/ Marc/ CERA/ Kohler/ Player

Supply and fix in repairs 15mm bore two way bib taps, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed by Engineer-in-Charge. Make : Jaquar/ Marc/ CERA/ Kohler/ Player

Supply and fix in repair, health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook, including making connection and fixed in position complete all as specified and as directed by Engineer-in-Charge. Make : CERA/ Hindustan/Parryware/Jaguar/Hindware/ Johnson

Supply and fix in repair angle stop valve of CP high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed by Engineer-in-Charge. Make : Prayag / R.S. Industries (POLYTUF)

Supply and fix in repairs vitreous china wash down, white, water closet pan (pedestal pattern) with 'P' of 'S' trap (of size 465mm x 355mm x 265mm),including plastic seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminium anodized hinging device including connecting to trap and flushing pipe, anti-syphonage pipe etc complete all as specified and directed by Engineer-in-Charge. Make :CERA/ RAK Ceramics/ Parryware/ Hindware/ Neyveli Ceramics (Neycer)/ Jaquar/ Kajaria (KEROVIT)

Supply and fix in repairs PVC valveless, syphonic action type low level flushing cistern 10 ltr capacity white with inlet ball valve, float and handle including brackets, flush pipe of polyethylene of low or high density or PVC 32mm dia including connection to pipe and fixing of chains and pull or lever complete all as specified and as directed. Make : CERA/ RAK Ceramics/ Parryware/ Hindware/ Neyveli Ceramics (Neycer)/ Jaquar/ Kajaria (KEROVIT)

Supply and fix in repair PVC connection, 15 mm size 450 mm long both end socket fix complete all as specified and as directed by Engineer-in-Charge.

Material and labour for cleaning and degermination inside the RCC/PVC water storage tanks of capacity not exceeding 500 ltr of any description and in any position comprising the following seven stage cleaning and sterilization of water tanks through bacteriological treatment by using TERBAC G5/INCHLOR-5/NB-10, TERBAC G65/INOXI-60/NB-69 and ultra violet rays complete all as specified and as directed. (a) 1st stage: Drain out the water by using exit valve or with high capacity dewatering system or any other suitable method approved by Engr-in-Charge. (b) 2nd Stage: Cleaning all the algae formation inside the tank by using TERBACG10/INCHLOR-5/NB-10, (a laboratory tested branded chemical) and scrubbing the walls of the tanks. (c) 3rd stage: Cleaning with fresh water by high speed jet pump with pressure of 5 PSI. (d) 4th stage Sterilization by using TERBAC G5/INCHLOR-5/NB-10, (a Laboratory certified branded halogen compound) for first bateria screening. (e) 5th stage: Cleaning the floor of the water tank by heavy duty industrial vaccum cleaner. (f) 6th stage: Sterilizing method by using ultra violet ray Ejector covering 360 degree with in the tank and kills all suspended bacteria for 2nd bacteria screening. (g) 7th Stage: Cleaning and sterilize the floor of the water tank by using laboratory certified branded strong oxidizing agend TERBAC G65/INOXI-60/NB-69 for third bacteria screening.

Note:- (i) Test certificate of TERBAC G65/INOXI-60/NB-69 etc from Government Laboratory mentioning suitability for sterilization should be submitted to the Dept before using for Sterilization. (ii) Cleaning of tank shall only be carried by the authorised service provider of the material used. Necessary approval shall be obtained from GE before cleaning of the tanks, (iii) After cleaning of the tank necessary completion certificate confirming the completion of sterilization of water tank shall be issued by the service provider and a sticker shall be fixed on the tank duly mentioning the date of cleaning and name of site etc) cleaning with bleaching powder and removing all scale and dirt etc from PVC / RCC water tanks and from mouths of circulating pipes etc., including disconnecting existing tanks setting aside (or lowering if required) of capacity exceeding 250 Ltrs but not exceeding 500 Ltrs all as specified and as directed.

All as per item No 95 above but capacity exceeding 500 Ltrs but not exceeding 1000 Ltrs complete all as specified and directed by Engineer-in-Charge

All as per item No 95 above but capacity exceeding 1000 Ltrs but not exceeding 2000 Ltrs complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs rotational moulded polyethylene water storage tanks 500 litres capacity with inlet connections, three layer (cylindrical or vertical with closed top) HDPE with ISI marked, hoisted and fixed in position either inside or out side of the building, including fixing accessories and connecting up pipes securing access covers etc complete all as specified and directed by Engineer-in-Charge Make : Sintex / Polycon, Jaipur / Rotex / Infra

All as per item No 98 above but 1000 litres capacity complete all as specified and directed by Engineer-in-Charge

All as per item No 98 above but 2000 litres capacity complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs gun metal gate valve, 20mm dia, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union complete all as specified and as directed by Engineer-in-Charge. Make : Leader/Zoloto/Seiko/Sant/Soma

All as per item No. 101 above but 25mm dia complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs 20mm dia Ball Valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge (Minimum weight - 210 gms) Make : Jaypee/GMP/Neta/Zoloto/Prayag/Symet

All as per item No 103 above but 25mm dia (Minimum weight - 455 gms) complete all as specified and directed by Engineer-in-Charge

Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed.

Supply and fix GI tubing, medium grade, 15 mm bore with all fittings and connections and fixing to wall/floor including cutting chases in brick walls pinning in if required and making good disturbed surfaces using with cement mortar 1:3 all as specified and directed. Make : Jindal / Zenith / Tata / Prakash / Swastik

All as per item No 108 above but 20mm bore complete all as specified and directed by Engineer-in-Charge

All as per item No 108 above but 25mm bore complete all as specified and directed by Engineer-in-Charge

Dismantling of 150mm dia salt glazed war, AC or reinforcement concrete or PVC pipe including bends/branch pipe jointed in cement mortar and taking out if required complete all as specified and as directed by Engineer-in-Charge

Dismantling of 100mm dia salt glazed war, AC or reinforcement concrete or PVC pipe including bends/branch pipe jointed in cement mortar and taking out if required complete all as specified and as directed by Engineer-in-Charge

Supply and fix UPVC (SWR) single socketed rain water pipes/ soil waste pipes with rubber ring joints, 110mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex/Astral

Supply and fix UPVC (SWR) single socketed rain water pipes/ soil waste pipes with rubber ring joints, 75mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Finolex / Supreme/Astral

Supply and fix UPVC (SWR) bends any radius, 110mm dia. complete all as specified and as directed by Engineer-in-Charge Make : Prince / Supreme / Finolex/Astral

Supply and fix UPVC (SWR) bends any radius, 75mm dia. complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex/Astral

Supply and fix UPVC (SWR) vent cowl 110 mm dia complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex/Astral

Supply and fix UPVC (SWR) vent cowl 75 mm dia complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex/Astral

Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, long body with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed. Make : Jaquar (Essco)/Prayag / Seiko

Supply and fix in repairs 15mm dia stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions etc complete all as specified and directed by Engineer-in-Charge. Make : Jaquar (Essco)/Prayag / Seiko

Supply and fix in repairs 15mm dia pillar taps, fancy type, cast copper alloy, with capstan head, chromium plated screwed down high pressure, with long screwed shanks and fly nuts, screwed iron pipe all as specified and as directed. Make : Jaquar (Essco)/Prayag / Seiko

Supply and fix in repair vitreous china squatting pan Orissa pattern of size 580 x 440mm white with integral foot rest, 'P' or 'S' trap front and back inlet and including connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern & flush pipe) all as specified and as directed by Engineer-in-Charge. Make:Cera/Hindustan/Parryware/Jaguar/Hindware/ Johnson

Supply and fix in repairs vitreous china wash down, white, water closet pan (pedestal pattern) with 'P' of 'S' trap (of size 465mm x 355mm x 265mm),including plastic seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminium anodized hinging device including connecting to trap and flushing pipe, anti-syphonage pipe etc complete all as specified and directed by Engineer-in-Charge. Make:Cera/Hindustan/Parryware/Jaguar/Hindware/ Johnson

Supply and fix in repairs PVC valveless, syphonic action type low level flushing cistern 10 ltr capacity white with inlet ball valve, float and handle including brackets, complete all as specified and as directed by Engineer-in-Charge. Make : Slim line/Commander/Hindustan.

Supply and fix flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and as directed by Engineer-in-Charge. Make: Finolex/Prince/Kisan/Supreme/SFMC

Supply and fix in repairs CI nahani trap 75mm with grating including jointing with waste pipe, fixed in cement concrete 1: 2: 4 type B1, Complete all as specified and as directed by Engineer-in-Charge. Make- Electro-Steel/ Kejriwal/ NECO/ Kesoram

Supply and fix in repairs vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm excluding taps, waste chain and plug and porcelain stopper including brackets, chromium plated waste coupling, waste fitting etc, cutting for and pinning in ends of brackets, connecting to supply and waste pipe complete as specified and directed by Engineer-in-Charge. Make : Cera/ Hindustan/ Parryware/ Jaguar/ Hindware/ Johnson Note:- Pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately.

Supply and fix in repair vitreous china bowl urinal, flat back, size 465 x 355x 265 mm white (minimum), with grating and urinal for discharge pipe, waste pipe complete including providing and fixing plugs, bedding urinal against wall in CM securing urinal to plugs with and including 60mm long brass screws, pointing around, fixing cistern with brackets, flush pipe grating and union for discharge pipe complete all as specified and as directed by Engineer-in-Charge. Make: Parryware/Cera(Iquality)/Jaguar/Hindware/Johnson

Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.

Material and labour for 10 mm thick rendering in cement mortar (1:4) on internal wall surfaces including dubbing out plaster in CM 1:6 of any thickness & finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of new plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer on wall complete all as specified and directed by Engineer-in-Charge. Make: M/S SHALIMAR/M/S BERGER/M/S NEROLAC/M/S ASIAN (Tractor Brand)/Birla Opus Paints

Supply and fix in repairs, UPVC Nahani trap,75 mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc, complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex

Material and labour for rendering 5mm thick plaster in cement mortar (1:3) on concrete surfaces of ceiling and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Note: Deduct Credit for demolished / dismantled material of Rs. (-) 74,385.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

KAJAL CONSTRUCTION (BID ID -3480521)

M/s. Deepak Traders (BID ID -3485205)

dimalsonsdecorator (BID ID -3479888)

Vishal Builders (BID ID -3480085)

mp construction co (BID ID -3480280)

Shah Enterprises (BID ID -3479900)