REPAIR PAINTING OF STEEL FURNITURE ALMIRAH LOCKER STEEL TABLES AND CHAIRS INCLUDING REPLACEMENT OF PLYWOOD TOP TO CHARPOY GI PIPE AT AF STN CARNICOBAR.

Amount

M & L for dismantling GI charpoy and carrying out repairs like threading at ends of existing pipe, removing broken unserviceable legs, long rails, short rails, elbows and check nuts welding joints wherever necessary and threading at both ends, fixing new elbows and check nuts, reassembling the GI charpoy complete all as shown on drawing and as directed. (Drawing Ref FD-220/ 77) Note: Long rails, Short rails, Stiffener, elbow and check nuts required to be replaced will be measured and paid separately as supply only. However, the fixing charge including welding shall be deemed to include in the rate quoted for this item.

Supply only GI 32mm dia 3Way elbow for GI pipe Charpoy all as shown on drawing and directed.

Supply only GI check nut for GI pipe charpoy all as shown on drawing and directed.

Supply only 30 mm x 4mm MS flat iron stiffener duly drilled for fixing of ply top to be welded to long rail at both sides of GI Charpoy all as shown on drawing and as directed.

Supply only 32 mm dia GI Pipe medium grade duly threaded at both ends for long rail of GI Charpoy all as shown on drawing and as directed.

Supply only 32 mm dia GI Pipe medium grade duly threaded at both ends for short rail of GI Charpoy all as shown on drawing and as directed.

M & L for removing the existing unserviceable or worn out plywood top of Charpoy GI/Charpoy OR Steel and S & F new 12mm thick Ply wood top, commercial BWR Grade, type BB, ISI Marked with nut & bolts to stiffeners and rails of charpoy all as shown on drawing and directed.

M & L for removing existing unserviceable table top and supply and fix new top with 18mm thick pre-laminated particle board exterior grade-I, with 4mm thick teak wood beading all-round duly polished on all sides all as shown on drawing and as directed for the following:-.Table Office / Officer Steel (Drawing Ref FD- 84/ 1003)

All as per item No 8.00 above but Table office clerk steel (Drawing Ref FD-84(M)/ 1004)

All as per item No 8.00 above but Table 900 x 900x 760 mm steel (Drawing Ref FD- 1007)

All as per item No 8.00 above but Teapoy Verandah (White top) (Drawing Ref FD-225)

M & L for removing the existing unserviceable locking device from Almirah large/medium/locker steel and S & F new locking device with duplicate keys of approved make all as specified and as directed. Make Sheel/Navtal (Drawing Ref FD-67M/1031/243/1032/ 257)

M & L for removing the unserviceable damaged legs of steel Almirah large/medium /locker steel and providing new legs made out of 18 gauge mild steel sheet into required shape including necessary welding and painting with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer by spraying machine to match with existing all as shown on drawing and as directed. (Drawing Ref FD-67M/1031/243/1032/ 257)

M & L for removing of old unserviceable/broken Hasp & Staple of locker steel bed side and S & F new 75mm aluminium anodized Hasp & Staple, fixed with 10mm dia MS rivets complete all as shown on drawing and as directed. (Drawing Ref FD- 257)

M & L for removing of old unserviceable/ broken handle from Almirah large/ medium /locker steel bed side and S & F new mild steel handle complete all as shown on drawing and as directed. (Drawing Ref FD-67M/1031/243/1032/ 257)

M & L for removing of old unserviceable cleats from Almirah large/medium steel and supply and weld new cleats made out of 14 gauge mild steel sheet of 25 x 35 mm including applying two coats of synthetic enamel paint light grey/olive green over one coat of red oxide zinc chrome primer including preparation to match with existing all as specified and directed. (Drawing Ref FD-67M/1031/243/1032/ 257)

Removing U/S seat and back of chair CBA steel and replacing of new seat and back of chair CBA steel as per Drg Chair CBA steel with arms complete all as specified. (Drawing Ref FD-75(M))

Removing U/S seat and back of chair CBA steel and replacing of new seat and back of chair CBA steel as per Drg Chair CBA steel with out arms complete all as specified. (Drawing Ref FD-75(M))

M & L for replacement of old unserviceable castor wheel from chair revolving/executive/computer with new castor wheel including welding, greasing and adjusting complete all as specified and as directed.

M & L for replacement of old unserviceable height adjustment mechanism from chair revolving/executive/computer with new one including greasing and adjusting completes all as specified and as directed.

M & L for removing worn out broken cane and re-canning with new plastic cane of 0.4 mm thick plastic cane for chair verandah clean of surface all as specified and directed. (Drawing Ref FD-256)

M & L for carrying out repairs by removing dents and bends, welding wherever necessary including preparing surface by scraping down old painted steel surfaces and filling with putty to obtain even surface and applying one coat of synthetic enamel paint light grey/olive green colour complete by using machine spraying all as specified and as directed for the following: -Almirah large steel with shelves (Drawing Ref FD-67M/ 351/ 1031)

All as per item No 22.00 above but Almirah medium steel with shelves (Drawing Ref FD-67/ 350/ 1032)

All as per item No 22.00 above but Book case steel with glass shutters (Drawing Ref FD-356)

All as per item No 22.00 above but Chair tubular steel with arms (Drawing Ref FD-75(M))

All as per item No 22.00 above but Chair tubular steel without arms (Drawing Ref FD-75(M))

All as per item No 22.00 above but Chair padded / writing steel with arms

All as per item No 22.00 above but Form without back (Drawing Ref FD-9(M))

All as per item No 22.00 above but Form with back (Drawing Ref FD-78M/ FD-335)

All as per item No 22.00 but Locker bed side steel

All as per item No 22.00 but Rack steel adjustable 6 tier (Drawing Ref FD-1038/ 345)

All as per item No 22.00 but Rack side steel 3 tier (Drawing Ref FD-321/ 1023)

All as per item No 22.00 but Stool steel 2’ x 1.6’ x 1.6’ height

All as per item No 22.00 above but Table 900 x 900 x 760 mm (Drawing Ref FD-1009)

All as per item No 22.00 above but Table 900 x 600 x 760 mm with drawer (Drawing Ref FD-1008)

All as per item No 22.00 above but Table 900 x 600 x 760 mm without drawer (Drawing Ref FD-1007)

All as per item No 22.00 above but Almirah large steel 1/2 H x 1/2 S (Drawing Ref FD-1033)

All as per item No 22.00 above but Almirah large steel 1/2 H x 1/2 S (Drawing Ref FD-243)

All as per item No 22.00 above but Rack Pigeon Hole (Drawing Ref FD-106)

M/s Nikitha Enterprises (BID ID -3250431)

SKV Engineering (BID ID -3252609)

M/s Susanta Enterprises (BID ID -3251408)

MAJUMDAR FURNITURE (BID ID -3254974)

Nirman Construction Company (BID ID -3254616)