Construction of Sports Stadium at Sewah Distt. Panipat. (Pdg. EI only)

Amount

Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections. Triple pole switch with neutral link 32 amp. 415 Volts. HSR 31.12(a) (xiv) Cat-B

Triple pole switch with neutral link 63 amp. 415 Volts. HSR 31.12 (a) (xv) Cat-B

Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. Size 40 mm x 40 mm x 6 mm. HSR 31.13(ii)

M.S.Sheet . Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide. HSR 31.14 (i)

Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. S.P.N. enclosure for single pole MCB 20 amp. HSR 31.15 (ii)

Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. SP MCB of 9 KA breaking capacity 6 amp. to 32 amp. HSR 31.17a) (ii)

TP MCB of 9 KA breaking capacity 6 amp. to 32 amp. HSR 31.17(a) (ii)

TPN MCB of 9 KA breaking capacity 6 amp. to 32 amp. HSr 31.17(a) (ii)

TP MCB of 9 KA breaking capacity 40 amp. to 63 amp. HSR 31.17(a) (iii)

TPN MCB of 9 KA breaking capacity 40 amp. to 63 amp. HSR 31.17(a) (iii)

Supply and erection of Fittings and Accessories. Call bell 220 / 230 volts A.C. bakelite with double coil. HSR 31.18 (vii)

Bell push flush type ( without flexible wire ) in existing sheet. HSR 31.18 (ix) (b)

Bakelite angle / straight button holder large size. HSR 31.18 (xi)

Switch 5 amp. On existing sheet. HSR 31.18 (xii)

Wall socket 5 amp. On existing sheet. HSR 31.18 (xiii)

Erection only of 1x40 watts or 2x40 watts 1220 mm long / 1x20 watts or 2x20 watts ,610 mm long fluorescent tube fitting directly on wall including necessary connections with 0.75 sqmm ( 24 / 0.20 mm ) PVC copper flexible cable for connecting the tube with the adjecent point. HSR 31.18 (xxiv)

Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job. HSR 31.18 (xxvi) .

Erection and carriage of fans. Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work. HSR 31.20 (i)

Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to he site of work. HSR 31.20 (iii)

Making suitable hole in the wall upto 450 mm sweep exhaust fan including finishing the same and fixing of wire mesh duly fixed with Deodar wood frame of section 40 mm x 25 mm thick. HSR 31.20 (v)

Pdg. and fixing of required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan upto 450 mm sweep. HSR 31.20 (vi)

Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed. HSR 31.21 (xxi)

Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed. HSR 31.21 (xxii)

Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. PVC pipe 80 mm dia. HSR 31.21(xxx) (b)

Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . HSR 31.22(i)

Extra for using salt and charcoal / coke for pipe earth electrode as required. HSR 31.22(ii)

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required . HSR 31.22(xii)

Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. stapples of same size. HSR 31.22(xix)

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections. 10 Sq. mm 2 Core Cable . HSR 31.26 (iv) Ard.

25 Sq. mm 4 Core Cable . HSR 31.26 (xIi) Ard.

50 Sq. mm 4 Core Cable . HSR 31.26 (xIiii) Ard.

Supply and erection of suitable compression type brass cable glands for underground Cable. 25 Sqmm to 50 Sqmm Cable 2 to 4 Core. HSR 31.28 (iii)

Miscellaneous Supply of M.S.pipe (B-Class) for suspension rod of ceiling fan including threading if required. .15 mm dia. HSR 31.35 (i) (a)

Supply and erection of 75 mm x75 mm x 60 mm deep M.S.box for telephone and inter-communication system including 2 pin 5 amp. socket including cost of bakelite sheet . HSR 31.35 (vii)

Wiring in 1.5 sq.mm PVC Insulated Copper conductor cable in 1.6 mm thick conduit pipe. Fan Point HSR 31.36 (I) (a) Short point

Medium Point HSR 31.36 (I) (b)

Long point. HSR 31.36 (I) (c)

Light Point Short point HSR 31.36 (II) (a)

Medium Point HSR 31.36 (II) (b)

Long point. HSR 31.36 (II) (C)

Call bell point including M.S box of size 180 mmX100 mmX 60 mm deep for Call bell. Long point. HSR 31.36 (VI) (c)

3 pin 5 amp. plug point including earthing the 3rd. pin etc. Short point HSR 31.36 (VII) (a)

Medium Point HSR 31.36 (VII) (b)

Long point. HSR 31.36 (VII) (c)

3 pin15 amp. plug point with 4 sq mm PVC insulated Copper conductor cable- including earthing the 3rd. pin etc. Long point. HSR 31.36 (VIII) (c)

Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe . Size 1.5 sqmm ( 3/0.81 ) HSR 31.40 (i)

Size 4 sqmm ( 7/0.85 ) HSR 31.40 (iii)

Supply and erection of Double door sheet steel enclosure distribution boards suitable for MCB's & ELCB's recessed in wall including bonding to earth complete with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4-way , SP&N ( Horizontal) HSR 31.41 (i)

4-way , TP&N ( Horizontal) (8+12) HSR 31.41 (v)

8-way , TP&N ( Horizontal) (8+24) HSR 31.41 (vi)

Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work. 25 mm dia. HSR 31.44 (ii)

Supply and erection of MS Saddle and clamps duly galvanised , on wall / RCC parapit for fixing underground cable at a distance of 0.60 metre center to center fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect and upto entire satisfaction of the Engineer-in-charge of work. HSR 31.48

Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Delux model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection etc. up to the entire satisfaction of the Engineer-in-Charge of the Work. HSR 31.55

S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 mtr. below ground level including diging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-incharge of the work HDPE pipe 90 / 75mm outer dia / inner dia. HSR 31.67 (ii)

Supply & Erection of MS box of size 8”×10”×4” (20cm×25cm) and 10cm deep made one of 1.6mm thick MS covered with 5mm thick bakelite sheet for fixing of 4no. socket and switch of 6amp. And one no. sock-et and switch Of 15 amp. Including fixing of one no. fuse unit and indicator of approved make. The MS box is recessed in wall including cost of necessary cement sand & mixture required to complete the job in all respect with cost of necessary labour charges for fixing the bakelite sheet and complete then job in all respect up to the entire Satisfaction of Engineer-in-charge of work. (NS)