Construction of Primary Health Center with residential accommodation at Village Jhumpa Kalan in Distt. Bhiwani (Pdg. Street/ Security Light only). RECALL

Amount

1: - Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. (HSR 31.17) Miniature circuit breakers of 9 KA breaking capacity. ii) SP MCB 6 amp. to 32 amp.

: - iii) SPN MCB 6 amp. To 32 amp.

: - iv) TP MCB 6 amp. to 32 amp.

: - vi) TPN MCB 6 amp. to 32 amp.

2: - Pipe Laying.Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. (HSR 31.21) v) Galvanized iron pipe 40 mm dia on surface.

: - xxvii) Galvanized iron flexible pipe complete with socket nipples and check nuts etc. at both ends ( upto length of 1 meter.) b) Size 20 mm dia

: - xxviii) For additional length of Galvanized iron flexible pipe more than 1 meter ( the payment is to be made for additional length of pipe more than 1 meter only in item no. xxvii ). b) Size 20 mm dia

: - xxx) Supply and erection of PVC pipe of 6 kg. pressure laid 1 meter below ground level complete including digging refilling of the trench with jointing etc. c) PVC pipe 65 mm dia.

3: - (Q) Earthing (HSR 31.22) i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

: - ii) Extra for using salt and charcoal / coke for pipe earth electrode as required.

: - xvi) Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required.

4: - Supply and erection of underground cable 1 metre below ground level covered with sand and bricks including necessary connections, digging and refiling of trenches. (HSR 31.25). xl) 16 Sq. mm 4 Core Ard. Cable .

5: - Supply and erection of underground cable ,loose in existing pipe or trenches complete with necessary connections. (HSR 31.26) iv) 10 Sq. mm 2 Core Ard. Cable.

: - xl) 16 Sq. mm 4 Core Ard. Cable .

6: - Supply and erection of suitable compression type brass cable glands for underground Cable. (HSR 31.28) ii) 10 Sqmm to 16 Sqmm Cable 2 to 4 Core

7: - Street Light. (HSR 31.30): IV) Supply and erection of weather proof M.S.Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, locking arrangements , housed in wall , including the cost of 1 no. 16 amp. 415 volts kit-kat and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board in the M.S.Box including painting and necessary connections.

8: - S/E of of PVC unsheathed copper conductor cable single core 1100 volts grad in pipe of suitable size excluding cost and erection of pipe. (HSR 31.40) i) Cable size 1.5 sqm(3/0.81 mm)

9: - S/E of double door sheet steel enclosure distribution board suitable for MCCb and ELCBs recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. (HSR 31.41) v) 4-way,TP&N (Horizontal)(8+12)

10: - S/E of MS saddles and clamps on wall/ RCC parapet for fixing underground cable at a distance of 0.60 meter centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect upto the Engineer-in-Charge of the work. (HSR 31.48).

11: - Supply and erection of 50mm diameter 1.5mtr. Long GI bracket (B-Class) making an angle 10 to 15 degree with horizontal plane for mounting street light fitting on GI bracket on wall with 2 Nos. 50mmx3mm thick MS flat including cost of cutting welding of GI bracket on wall with 2 nos. 50mm x 3mm thick MS flate including cost of cutting welding of GI pipe complete with cement sand mixture bolts and nuts etc including making necessary connection in all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. (HSR 31.53)

12: - Supply and errection of Hot Dip Galvanized octagonal pole 3 mm thickness, with base plate including of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete of 2 nos. 100 A, 4 pole nature links including connection etc with suitable connection arrangements for 2 no. MCB/ kit kat including cost of RCC 1:1:5:3 for foundation of size 0.7 m x 0.7m x 1.8 m with minimum 8 Nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm CC for fixing the pole with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. (As per approved make list of Department) (HSR 31.68). i) 7 M long pole with top dia 70 mm and bottom dia 130 mm with base plate of size 220 x 220 x 12mm.

13: - Non Schedule Items Supply & Erection of Single arms bracket made of 32/50mm dia GI pipe B class ISI 1.20 mtr. Long with coller pipe (GI) 75mm dia 60cm Long top covered with ornamental cap duly welded, painted 2 coats of aluminum paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge. Bracket duly erected on existing 7/9 Mtr. High Octagonal pole including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge of the work.

14: - Supply and erection of 25 W LED Post lantern new generation energy saving envirmental friendly long life aesthetically desinged with symmetrical light distribution, spen aluminium land scap luminiaries with high power LED as light source with the protection of IP-65 of LHEVBGP7PN 6K 025 (Rubby clear) of Havell's make/ BLPTSP 25 W NW LED of Bajaj make/ LPTH-20- CDL of Crompton make complete with all accessories and labour to complete the job upto the entire satisfaction of Engineer-in-charge of the work.

15: - S/E of 60 W LED street light fitting BRP409 LED 060 CW HE NRPCS1 PSU GR of Philips make/ HPL LED SL 6060S/ HLSLD-15-60 (WL-R) of Hallonix/ ENDURAPEARLPLUS 60W LED of Havell's make /BRTFG 60W LED V3 WW of Bajaj Make in aluminum PDC housing toughened glass cover with IP-66 protection With Lense including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work.

M/S NATWADIA ELECTRICAL COMPANY