SPL REPAIR TO STREET LIGHT OF HAMID VIHAR CHILDREN PARK, MAP QTRS ZONE-III, CONVERSION OF LT OH TO UG CABLE FOR SECURITY LIGHTS AT MED REGT AND OFFRS CSD ZONE 1 AND PROVN OF PERIMETER SECURITY LIGHT AT NATURE PARK, APFC PANEL AT IB UNDER GE(S) JAIPUR

Amount

Excavation in trenches n.exc 1.5 metre wide and n.exc 1.5 metre in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes, laying cables errection of poles / struts/stays etc n.exe 10 Sqm on plan not exceeding 1.5 metre in depth and getting out in any type of soil complete as specified. 12/REV - 216 18/MIN - 10 04/SR - 189 07/SR - 229 06/SR - 432 50/MIN - 110

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in any type of soil complete as specified. 12/REV - 136 18/MIN - 7.5 04/SR - 132 07/SR - 95 06/SR - 302 50/MIN - 12

Removing of excavated material (soil) to a distance n.exc 50 metre and depositing where directed at a level n.exc 1.50metre above the starting point complete as specified. 12/REV - 80 18/MIN - 2.5 04/SR - 57 07/SR - 45 06/SR - 130 50/MIN - 98

M&L for brick for protection of PVC under ground cable with common burnt clay building bricks sub class B with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent bricks not exceeding 10mm and complete all as specified. 12/REV - 7 18/MIN - .24 04/SR - 5.6 07/SR - 6.8 06/SR - 12.8 50/MIN - 4

M & L Sand cushioning to PVC under ground cable with tibba sand and punning to provide a required cover complete as specified. 12/REV - 65 18/MIN - 2.5 04/SR - 56.7 07/SR - 69 06/SR - 129.6 50/MIN - 32

M & L for Supplying, laying, connecting and testing in trenches, under floors/ roads or on walls Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armored, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade, of size following sizes :-

(a) 120 sqmm, 3.5 core 04/SR - 100

(b) 70 sqmm, 3.5 core 12/REV- 110

(c) 50 sqmm, 3.5 core 18/MIN- 40 07/SR- 70 06/SR - 600 50/MIN - 130

(d) 35 sqmm, 3.5 core 12/REV - 50 07/SR - 400

(e) 25 sq mm, 4 core 07/SR - 450

(f) 16 sq mm, 4 core 12/REV - 900 04/SR-620 07/SR - 610 06/SR - 1200 50/MIN - 450

Supply, fixing & install Prestressed concrete Pole, 9.0 Meters long, 102 mm X 152 mm at top and 102 mm X 289 mm at bottom, Class 10 complete all as specified including the portion above coping shall be painted in alternative bands of black & white synthetic enamel paint starting with white colour (each band of 30 cm wide) by two coat of synthetic enameled paint upto 1.5 m height complete as specified. 12/REV - 22 50/MIN - 8

M & L PCC (1:3:6) type C-2 using 40 mm graded stone aggregate for foundation of stay assembly / struts / poles etc complete asn specified. 12/REV - 17 07/SR - 03 50/MIN - 6

M & L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping pedestal PCC pole etc including form work complete as required and specified. 12/REV - 5 07/SR - 1 50/MIN - 1.5

Supply and fixing of New Generation Energy Saving LED street light: indus-E Series top opening 90 watt. powder coated coted PDC aluminium housing with intgrated lens Polycarbonate cover,SMD LED with integrated lens cover,body with toughened glass, IP 66 protection. Make Crompton ,Cat No LSTP-90-CDL or Equivelent cat part in other make as per Appendix 'B'. 12/REV - 22 50/MIN - 8

Supply and fixing of GI pipe bracket 40 mm dia, medium grade, 1.50 mtr long and bend in 120 degree angle (single/double swan) for mounting of street light of suitable size including 2 x FI clamp (40x3 mm size), nut & bolts and washers of suitable size complete all as specified. 12/REV - 22 07/SR - 26 50/MIN - 8

Supply and fixing of thermoplastic, polystyrene unbreakable junction box with transparent lid, size 217 x 253 x 115 mm suitable for pole mounted outdoor type IP 65 insulated complete with FI clamp & nut, bolts, washers and including phase seperator between R, Y, B terminals and one MCB SP 6 amp 10 KA, all duly mounted on din cannel, cable glands for cable entry. Make : Hensel Cat Part No KG 9003 IN or Equivelent cat part in other make as per Appendix 'B'. 12/REV - 22 07/SR - 30 50/MIN - 8

M&L earthing complete as per electrical plate No. 5 of MES SSR Part-I with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly vertically in ground in a pit depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less then 1.5 metre below normal ground level connected to and including galvanised iron or steel earth strip 25mm x 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel. Earthing strip shall be protected by galvanised iron or steel pipe 40mm bore light grade and connected to continuous earth wire on pole / test point. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel PCC pit and RCC cover complete all as specified & tested complete. Note 1- Following items deemed to be included in quoted rate (a) Earth electrode (b) Main earthing lead from earth electrode to test point and further to equipment to be earthed upto 7.5 meter (c) Material and labour for connecting earth electrode and earthing lead as specified (d) Adequate quantity of charcoal dust and common salt as per direction (e) All labour involved including testing of earth network.(f) Excavation and earth work or drilling holes for electrode (g) P.C.C pit and C.I cover (h) Funnel with watering pipe, wire mesh and copper lugs etc as specified (j) G.I protection pipe pipe of size ordered specified for protection of earthing lead from mechanical injury or tempering. Note 2. On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. 12/REV - 4 04/SR - 4 06/SR - 4 50/MIN - 2

S & F of 1100 volts grade heavy duty cable PVC insulated copper conductor cable with inner sheathing of pvc tape and overall PVC sheathed in service connection three core stranded copper conductor of size 1.5 Sqmm drawn through steel pole from junction box to street light fitting, 2 x FI clamp, nut & bolts and washers of suitable size complete all as specified and directed by Engr-in-charge. 12/REV - 154 50/MIN - 50

Supply and laying of GI pipe, size 40 mm dia medium grade fixed on poles, to walls and ceiling or laid in floors etc. with all fittings for cable protection complete all as specified. 12/REV - 15 50/MIN - 15

Supply and fixing PVC conduit Pipe of 25 mm dia Heavy grade with suitable clamps, screws including tee, bends, elbows fixing on walls etc. with all fittings complete all as specified. 12/REV - 154

Material & Labour for boring under road/drain by manual/machine method for inserting GI tubing up to 80 mm dia for cable protection all as specified and directed by EIC. 12/REV - 10 04/SR- 20 06/SR - 10 50/MIN - 10

Supply, Installation, testing and fixing of outdoor type floor mounted Automatic Power Factor Correction Panel (APFC Panel) for 3 phase, 415 Volts & 50 Hz frequency system of capacity 50 KVAR making of 3.15mm thick CRCA sheet duly approved by CPRI and powder coated, insulation arrangement, alluminium bus bar and wiring complete all as specified and directed including provision of suitable of foundation of APFC Panel including brick work, PCC (1:2:4) type with proper incoming and outgoing arrangements of XLPE Cables / cable glands and mounting structure for APFC Panel making of 40x40x6 Channels made out of GI provided with two coats of synthetic enamel Paints included in above quoted rate. 18/MIN - 1

Supply and Fiix MCCB 100 Amps, 4 Pole, 415 Volts And 50 Hz of 25 KA rupturing capacity complete all as specified and directed. 18/MIN - 1

M&L earthing complete as per electrical plate No. 3 of MES SSR Part-I with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly vertically in ground in a pit depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less then 1.5 metre below normal ground level connected to and including galvanised iron or steel earth strip 32mm x 6mm by means of bolts, nuts check nuts and washers of galvanised iron or steel. Earthing strip shall be protected by galvanised iron or steel pipe 40 mm bore light grade and connected to continuous earth wire on pole / test point. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel PCC pit and RCC cover complete all as specified & tested complete. Note 1- Following items deemed to be included in quoted rate (a) Earth electrode (b) Main earthing lead from earth electrode to test point and further to equipment to be earthed upto 7.5 meter (c) Material and labour for connecting earth electrode and earthing lead as specified (d) Adequate quantity of charcoal dust and common salt as per direction (e) All labour involved including testing of earth network.(f) Excavation and earth work or drilling holes for electrode (g) P.C.C pit and C.I cover (h) Funnel with watering pipe, wire mesh and copper lugs etc as specified (j) G.I protection pipe pipe of size ordered specified for protection of earthing lead from mechanical injury or tempering. Note 2. On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. 18/MIN - 2

S&F in replacement of conventional street light fitting any type/capacity with LED street light fitting 70/72W (IP-66) with integrated lens for asymmetrical light distribution, system lumen output of ≥ 6500 (± 2.5% )lumens, system efficacy ≥ 100 lm/W, LED lumen efficacy ≥ 120 lm/W, CCT 3000K~6500K, CRI >70, electronic driver, 10 kV in-built surge protection, Output open/short circuit protection, phase to phase protection, over-voltage protection, etc. as per IS-15885, THD<10%, PF ≥ 0.95, housed in pressure die cast aluminium housing including necessary fabrication for fixing of LED street light, the fixture should have adjustable dia all as per directed by Engineer-in-Charge including Dismantling of old HPSV lights/LED Lights complete of any size including necessary connectionsas directed by Engineer-in-Charge.Make : Havells Cat Part No ENDURAPEARLNEOSL70W or Equivelent cat part in other make as per Appendix 'B'. 04/SR -30 06/SR - 25

S&F in replacement polycarbonated unbreakable Junction box with fuse provn and suitable connection for three phase incoming cable, single phase out going cable endorsed in thermo plastic enclosure. Shock proof safe IP 65, weather proof, rust proof, dust and water proof internally embedded gasket with provn for cable entry through glade of size 200x160x98mm along with MS Clamps copper bus bar for three phase connection and 02X MCB SP 6 Amp 10 KA incl single phase 2.5 sqmm copper conductor PVC sheathed as required at site for electric connection to LED lights and connecting wire from JB to LED fitting as required complete all as specified directed. 04/SR -30 06/SR - 25

Supply & fixing or laying galvanised steel tubing light grade 50mm bore (ISI marked) for protection of under ground cable on poles / walls under road crossing etc all as specified complete. 04/SR -20 06/SR - 10

S&F nature switch for automatic ON/OFF of street light by sensing natural light of 1 phase upto 8KW load. For switching ON< = 30 lux, For switching OFF>=10 Lux, Auto high voltgae sense and trip, auto low voltage sense and trip, 50-60HZ, IP66 protection class 2, with copper wiring by minimum of 10 Sqmm. Make Cat part no- swadeep 02EC 8KW1P or equivalent in other make as approved. 04/SR - 1

Supply & install steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screw as specified Type 410 SP-31 (9 metres long) and providing with 02 coats of aluminium paint over a coat of red oxide primer complete with suitable brackets and fixing arrangement and concrete work all as directed and specified by Engr-in-Charge. 04/SR- 20 06/SR - 15 07/SR - 10

S&F heavy duty PVC insulated aluminium conductor 1100 Volts grade cable with inner sheathing of PVC tape and overall PVC sheathed in service connection three core stranded aluminium conductor of size 4 Sqmm ISI marked drawn through steel pole from junction box to street light fitting complete all as specified. 07/SR-110

Taking down street light bracket, angle clmaps nuts and bolts of from the existing pole safely without damaging complete. 07/SR - 20

Taking down old unserviceable cable of any size/type complete all as specified and directed 07/SR - 800

Taking down old deteriorated poles of PCC/Steel includind clamps/nuts bolts etc of any size . 07/SR - 10 06/SR - 15

Supply and fixing LED street light 100 W fitting comprising of pressure die cast aluminum housing with toughened glass of system, lumen efficiency> 90 lumen/watt complete with electronic driver for vibration proof performance having P.F.>0.95, operating voltage range 120 to 270 volts, THD< 10%, internal surge protection of 5 KV(in driver) and additional external surge arrestor of 10 KV for surge protection, driver protection-short circuit, open circuit, No-load, over load,EMI,CCT 5700 K and CRI> 70,IP 66, incl clamps, fastners complete all as specified and as directed. Make Havells Cat part No- ENDURAPEARLMAGNUMSL100WLED757PASYTOTG or equivalent in other make as Appendix 'B'. 07/SR - 36

M&L for Mild Steel work such as angle iron fencing post struts and flat iron fillets etc of grade Fe-310-0, including drilling holes, punching, splitting ends to secure chain link fencing or fixing of barbed wire to posts including all necessary cutting, welding drilling, bolting or riveting etc and including bands strap support for chain link, steel screw as required,10mm dia MS bar as in tie bars/horizontal bars fixed to secure the fencing on posts complete and rolled mild steel Framed work as in Gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete GDE Fe 410-0 or Fe 310-0 including taking down old fencing all as specified and directed by Engr-in-Charge. 07/SR - 20

S&F outdoor (Kiosk type) type LT panel, weather & vermin proof MS sheet housing 3.15 mm thick, powder coated over a coat of primer, double door, front & rear openable type, mounted on 40x40x6 mm angle iron frame, floor mounted type with one MCCB, 4 pole, 63 Amp, 35/36 KA, 415 volts, thermal release, adjustable type (Ics=100%Icu) as incomer and Aluminium bus bar 200 Amp of length not less than 60 cm, 4 pole duly drilled with holes for cable connections, after due approval of panel drawing including PCC pedestals of suitable size, making good the area complete all as specified and directed by Engr-in-charge. 07/SR - 1

Dismantling old existing ACSR conductor of any type/size all as directed by Engr-in-Charge. 06/SR - 4

Dismantling old existing MS cross arms of any type/shape all as directed by Engr-in-Charge. 06/SR - 4

Shree Karni Electrovision

LAKSHMI ASSOCIATES

M/s Radhey Enterprises

M/S Anil Enterprises

M/S TRADE LINKERS

JAGDAMBA CONSTRUCTION COMPANY