Loading…
Loading…
Tender ID
Tender Value
₹99,990
EMD Value
₹2,000
Closing Date
19 Mar 2026, 3:00 pmClosed
PRADHAN
UKHRA GRAM PANCHAYAT
Renovation of Ukhra Gram Panchayat office at Sansad No. - XXVI, P. S. No.-220 under Ukhra Gram Panchayat under APAS,
2026_ZPHD_1013809_3
e-NIT/36/2025-26
Open Tender
CIVIL WORKS
Percentage
30 days
UKHRA GRAM PANCHAYAT
Please refer Tender documents.
4 documents required · 4 mandatory
₹250
₹2,000
9 Jun 2026
11 Mar 2026
23 Mar 2026
11 Mar 2026
19 Mar 2026
11 Mar 2026
Cutting chase upto 125 x 150 mm. and subsequent mending of damages. (a) in brick wall [Cement-3.6 Kg/Mtr]
Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in 1st floor.
Removing old scales, blisters etc. of interior surface of walls, ceiling by scraping etc. and preparing smooth and even surface with rendering or cement mortar (1:2) (as necessary), to make the surface suitable for receiving distemper.
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint ncluding scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (a) Two Coat ii) Solvent based interior grade Acrylic Primer
Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats
Plain and finished timber planks in partition, shelves etc. fitted and fixed complete as per design (butt joints) in 1st floor. (ii) 19mm thick planks (c) other Local wood
Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all incidental charges thereof. In 1st floor Glossy/Matt/Suede excluding surface texture or metallic lustre. (i) Thickness of laminate 1.5mm
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. v) 6mm thick clear glass.
Supplying, fitting, fixing, installation of office computer table set
Supplying, fitting, fixing, installation of office chair
Display Board writing & photo (3 phase).
Add CGST @ 9.00% of Total Cost
Add SGST @ 9.00% of Total Cost
Labour welfare cess @ 1.00%
Add Contigency
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.41 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.29 MB
BOQ_2490136.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .