REPAIRS TO ROOF TREATMENT, WALL CLADDING TILES, PERIODICALS, JOINERY, PLUMBING AND OTHER ALLIED WORKS AT 261 ARTY BGDE, 512 LT MSL REGT, 110 MED REGMT, SIG COY, DSSI AND CERTAIN OTHER IN THE AREA OF AGE B/R-I UNDER GE (EAST) DELHI CANTT-10

Amount

M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stopping the previously treated surfaces and applying two coat of oil emulsion distemper of approved shade/tint over and including one coat of 1 mm thick wall care putty to achieve smooth finish complete all as specified & directed.

Material and Labour for preparation of old decorated surfaces of wall (plastered or un-plastered) including cornices, pilaster etc by brooming down with steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots etc and applying one coat distemper oil bound emulsion (white or tinted) on walls complete all as specified and directed.

M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stopping the previously treated surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces(tint and pattern as approved by GE) complete all as specified. Note:- This item includes use of necessary scafffolding , Jhulla arrangement and safety net up to any height of building

M&L for complete removal of existing treatement on wall surfaces with sand paper, iron patti or grinder, incl pillasters and cornices etc.and applying two coat of interior acrylic emulsion paint over a coat of 1 mm thick birla wall care putty to achieve smooth finish complete all as specified.

M&L for complete removal of existing treatement on ceiling surfaces with sand paper, iron patti or grinder, incl pillasters and cornices etc by brooming down with steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coat of white wash complete all as specified and directed.Note:- This item includes use of necessary scafffolding and safety net up to G+5 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint of tint / shade as approved complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces including roof sheet of any description and applying two coat of synthetic enamal paint of tint as approved complete all as specified and directed.

M&L for preparing old painted concrete surfaces such as chequerd tiles, paver blocks, kerb stones etc and similar surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer, complete all as specified and directed.

M&L for preparation of old plastered outer wall surfaces and applying two coats of cement base paint complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. complete all as specified and directed.

M&L for brick work straight or curved on plan exc 6m mean radius in cement mortar (1:6) with Sub class ‘B’ brick including manhole raising, footpath, etc complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster/grit plaster any description on brick/concrete surfaces etc including raking out joints hacking for key, scrubing down with water etc complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar 1:6 on fair faces of new or old brick works or concrete work finished even & smooth without using extra cement, complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar 1:4 on other than fair faces of new or old brick work or concrete work, finished even & smooth without using extra cement, complete all as specified and as directed.

M&L for 5mm thick rendering in cement mortar 1:3 on ceiling new or old brick works or concrete work finished even & smooth without using extra cement, complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of alkali resistant primer, complete all as specified and directed.

M&L for prepration of newly plastered surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces(tint and pattern as approved by GE) complete all as specified. Note:- This item includes use of necessary scafffolding , Jhulla arrangement and safety net up to G+5 storey building.

M&L for preparation of newly plastered surfaces of ceiling and applying two coat of oil bound distemper(white or tinted) over a coat of alkali resistant primer, complete all as specified and as directed.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm thick cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels made by wooden beads with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified including using white cement in place of grey cement for grit wash complete all as directed.Note:- This item includes use of necessary scafffolding and safety net up to G+8 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and directions of Engineer-in-charge.Note:- This item includes use of necessary scafffolding and safety net up to G+5 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed by Engineer-in-Charge.

M & L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregates) for sub bases of floor, mass concrete finished even and rough to receive topping layer completed all as specified by engg in charge.

M&L for 75mm thick PCC (1:3:6) type C-2, (using 40mm graded stone aggregate) as in plinth protection laid in bays and surfaces finished even & smooth without using extra cement complete all as specified .

M&L for glazed ceramic tiles (300x450mm or 300x600mm)x7 to 8 mm thick coloured tiles in vertical surfaces for internal surfaces, wall claddings, boundry wall dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match as in dado, over and incl 10 mm thick cement plaster / backing coat in CM (1:4) complete all as specified and directed.

M&L for non-skid, ceramic coloured tiles 7 to 8mm thick (Square/rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors,of different patterns set and jointed in cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed 15mm thick average in cement mortar 1:6, complete all as specified & as directed.

M&L for non-skid, ceramic coloured tiles 7 to 8mm thick (Square/rectangular ) area of each tile exceeding 0.18 sqm but not exceeding 0.18 sqm, in floors,of different patterns and including 3 mm wide and 5 mm thick spacers set and jointed in cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed 15mm thick average in cement mortar 1:6, complete all as specified & as directed.

M&L for Vitrified double charged tiles 8 to 9 mm thick polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry, over and including 15 mm thick screed bed in CM 1:6 and pointed in white or coloured cement to match, complete all as specified & as directed.

Supply and fixing as in repair vitreous china squatting pan "Orissa" pattern size 580 x 440mm, white, with integral footrest (excluding flushing cistern) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor, set with cement concrete, fixed as in repairs complete all as specified and directed.

S & F in repairs vitreous china padastal pattern, "EWC" white with connection to trap, and to flushing pipe anti-syphonage pipe and including sheet cover and CP jet etc. complete all as specified and directed.

S&F in repairs Viterious China urinals, bowl type(back or corner wall type) ofsize 465X355X265 mm,complete including providing and fixing plugs,bedding urinal against wall in Cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws,pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe,grating and Union for discharge pipe. complete all as specified and directed.

Supply and fixing as in repair PVC valveless syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC bend for required squat pattern etc, set with concrete and making good to floor, fixed as in repairs complete all as specified & directed.

Supply & fixing as in repair vitreous china wash hand basin, white flat back, size 550mm x 400mm including pillar tap of chromium plated with capstan head with long screwed shanks and fly nuts, brass chromium plated waste coupling 32mm dia, with fly nuts, pvc waste pipe and MS brackets 25x25x5 mm thick incl cutting for and pining in ends of brackets, fixed as in repairs complete all as specified & directed.

Supply and fixing 15mm dia PVC connection with brass nut, of length 600 mm,fixed as in repairs, complete all as specified and directed.

S&F as in repairs 15mm bore pillar tap long neck,cast copper alloy, with capstan heads, chromium plated, screwed down high pressure,with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

Supply and fixing long body Bib taps,chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.

Supply and fixing angle stop valve, chromium plated,screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.

S&F in repairs 15 mm dia stop valve concealed type cast copper alloy screwed down high pressure chromium plated with long shank including dismantling porting of the wall as required including making good to match with existing complete all as specified and directed.

Supplying and laying of CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of old pipes complete all as specified.

Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of old pipes complete all as specified.

S&F CPVC Brass Elbow fitting suitable for CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F CPVC Brass Elbow fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F CPVC Brass TEE fitting suitable for CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F CPVC Brass TEE fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F CPVC Brass UNION fitting suitable for CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F CPVC Brass UNION fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F CPVC Brass FTA female adaptor fitting suitable for CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F CPVC Brass FTA female adaptor fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

Dismantling water tanks and removing from site of 500 litres capacity, complete all as specified and directed.

Dismantling water tanks and removing from site of 1000 litres capacity, complete all as specified and directed.

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified and directed

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified and directed

S&F as in repairs PVC lid / cover for PVC water tank 500 / 1000 litre capacity complete all as specified and as directed.

S&F in repairs 32mm dia PVC waste pipe for WHB 60cm long with union complete all as specified and directed.

S&F as in repairs CP Health faucet with 1.50 Mtr flexible chromium plated tube and hook fixed to angle valve 15mm bore with accessories complete all as specified and directed.

S&F in repair vertical venetian blinds consisting of Aluminium head rail with vanes/louvers 100 mm wide of approved tint and travers coard complete fixed in position all as specefied and directed by Engr-In -charge

S&F Double roller Zebra venetian blinds consisting of Mounting pelmet assembly, aluminium head rail with flip cover of approved tint/shade and traverse coard complete as per manufacturer instruction fixed in position complete all as specified and directed by Engr-In -charge.

Cutting chases, pining in making good to facings where required & pointing in cement mortar1:3 to ends etc or edges of landings, steps cills,sunshades, shelves,lintels,etc and cutting chases for concealed water tubing and making good,cutting n.exc. 10cm girth in brick walls all asdirected.

Disconnecting existing tanks, setting aside (or lowering if equired ) for repairs ,cleaning,etc.and hoisting if required reconnecting and refixing in position including cleaning and removing all scales and dirt from tanks and from mouths of circulating pipe etc for 250 ltr to 500 ltrs capacity of tanks complete all as specified and directed.

Description all as per Srl Item No 59 above but exc 500 ltrs and not exc 1000 ltrs complete all as specified and directed.

S&F anodised aluminium powder coating aluminium section weighing not less than 0.55Kg/m {minimum thickness of powder coating 50 micron)frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified

Taking down chowkhats or frames with shutter (without taking off shutters from the frame) of size exc 1.5 sqm but not exc 4 sqm and making good to distrubed surface without any extra cost complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exc 1.5sqm and making good to distrubed surface without any extra cost complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates of size 105x60 mm including necessary fixing lugs, lock strike plate etc complete made out of 1.25 mm thick MS sheet all as spd and directed.

Material & Labour for pressed steel frames for doors of size 125 x 60 mm for doors with one or more rebate incl necessary fixing lugs, hinges, lock, strike plates welded with frame and making arrangement for fixing of door spring etc complete all as specified.

S & F factory made solid PVC door frame size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per spacification and directed.

PCC 1:3:6 type C1 using 20mm graded stone aggregate as in filling hollow of pressed steel frame.

S & F factory made solid pannel PVC door shutter 30mm the style consisting of frame made out of MS tube, for top & bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, bottom rail & lock rail on either side & as gep insert for top rail and bottom rail. panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per spacification and directed.

S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides all as spd and directed.

S&F 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part -I section 8 clause 8.24 (a) supplied and fitted to chowkats

Material & Labour for prepapration of new or previously untreated surfaces of wood or based materials of any description not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint over a coat pink primer complete all as spd and as directed.

S&F 100mm size butt hinges, medium weight cold rolled mild steel all as spd and directed

S&F 150 mm long aluminum anodized barrel tower bolt of extruded section all as spd and directed

S&F 150mm size aluminum handles cast type, anodized all as spd and directed

S&F 250mm long aluminum alloy anodized sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy all as spd and directed

S&F aluminium section powder coated (powder coating not less than 50 micron thick) grill of suitable size 2 to 3 mm thick section 10cm centre to centre spacing fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles complete with U-channel all around fixed in window with screws complete all as specified and directed

S&F anodised aluminium Powder coating door shutters aluminium section weighing not less than 0.55Kg/m {minimum thickness of powder coating 50 micron) including necessary joining cleats, glazing clips, ruber neoprene packing , hinges,anodised aluminium snap beading screws,all necessary builders hardware etc complete all as specified.

S&F anodised aluminium Powder coating window shutters, side hung type without sash bars aluminium section weighing not less tha 0.55Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150mm long (1no), hinges type B-21 100mm long(2 no.) suitable handle(1 no) including all necessary builders hardare complete all as specified.

S&F anodised aluminium Powder coating ventilator shutters, side hung type without sash bars aluminium section weighing not less tha 0.55Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150mm long (1no), hinges type B-21 100mm long(2 no.) suitable handle(1 no) including all necessary builders hardare complete all as specified.

S&F 12mm thick particle board exterior grade with decorative prelaminated both sides of approved shades fixed to aluminium shutters/ partitions complete all as specified and directed.

S&F 4.8mm thick sheet glass ordinary quality in Squre/rectangle fixed with glazing pins and rubber beading etc in aluminium door/window/partitions etc complete all as specified and directed.

S&F in repair aluminium anodised fully glazed partly panelled partitions and fixed glazing made out of anodized alum section 63.50x 38.10 x 1.60mm including necessary jointing cleats glazing clips, rubber packing anodised alum snap beading screws etc, frame work fixed to walls , floor and ceiling with rawl plug wherever required complete all as spd and as directed by Engineer-in-Charge (Sheet glass and particle board shall be measured and paid for separately)

S&F in repair door closer hydraulically regulated, aluminium body designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stailess steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed complete complete all as specified and directed.

Repairing of rolling shutter push type with necessary repair work of defective parts i.e, re posting of laths, riveting to old defective rivets, tightning nuts and bolts, replacement of spring, greasing to movable parts and at guide channel including taking out and re-fixing rolling shutter for smooth functioning size of rolling shutter not exc 10.00 sqm each all as directed by engineer-in-charge.

S&F in repairs mild steel plain sheets covering to door shutter and top cover of rolling shutter cover cut to size, edges beaded as directed, holes punched all as specified

Removing Debris/ demolished materials by mechanical means including loading, transporting, unloading to outside Mod land from 5KM upto 20KM lead at approved municipal dumping ground complete as per direction of Engineer - in - charge.

S&F as in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe and fixed for 15 mm bore pipe, complete all as specified and directed.

S&F as in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe and fixed for 20 mm bore pipe, complete all as specified and directed.

Supply and fixing as in repair 15mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling or laid in floors complete all as specified & directed.

Supply and fixing as in repair 20mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling or laid in floors complete all as spd & directed.

S&F as in repairs Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed,screwed down, high pressure screwed ends for iron pipe or for unions and fixed complete all as specified and as directed.

Dismantling AC sheet/CGI sheet/PGI Sheet/tensile fabric sheet (corrugated, semi corrugated, etc) in roof covering complete all as specified and directed.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, cladding to wall, ridges etc. fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm complete all as specified & directed by engr-in-charge

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape etc, cut to designed shape (Jhhallar) as directed at site fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm complete all as specified & directed by engr-in-charge

Demolition of cement concrete in ground floors and pavings etc not exc 15 cm thick above or below ground level complete all as specified and directed.

M&L for PCC type B1, 1:2:4 (using 20mm graded stone agg) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelersm apexstone, bed plates, including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Supply and fixing factory made chequred cement concrete prepolished coloured tiles 300mm x 300mm x 25mm thick, set jointed and pointed in neat cement slurry with grey cement mixed with pigment to match the colour of tiles, laid over and incl 20mm thick screed bed in CM 1:6, complete all as specified & directed.

Material & Labour for 75mm thick cement concrete type D-2,1:4:8 (40mm graded stone aggt) as in sub base concrete all as specified & directed.

Material and labour for Precast RCC cover slab con (MD-10) conforming to IS-12592 (2002) as in cover slabs of manholes, gully traps etc set in cement mortar (1:4) complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completed. Including 20mm thick screed bed or bedding lay in CM 1:6. complete all as specified and directed.

M&L machine cut Granite slab 15 mm thick fixed as in repairs for steps, pillars,skirting/dado, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2, 3mm thick, set and jointed with white/coloured cement to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as spd.Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish all as spfd.

M&L 100 mm thick cement concrete type D-2,1:4:8 (40mm graded stone aggt) as in sub floors, filling and mass concrete etc complete all as specified.

M & L in replacement machine made Rubber moulded precast concrete interlocking paver block (coloured),pre polished of any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, over and including 25mm average thickness sand cushioning complete all as spfd and directed.

Taking down and Adjusting / repairing of Aluminium door/windows shutters, for easy closing/opening tightning of hinges or changing the position of hinges, tighetning of Glass/ Particle board by replacing rubber beading and clip packing, adjustments of floor machine for smooth opening and closing and refixing the same complete all as specified and directed.

Taking down and Adjusting / repairing of steel/wooden door/window shutters for smooth opening/closing including greasing, welding and adjustment of projecting type friction hinges in any position make fully functioning complete all as specified and directed.

Supply & fixing as in repair aluminium alloy body floor door stopper of size 75m having double round legs for better grip ,with rubber base fixed to door shutters with countersunk screws complete all as specified and directed.

S&F in repairs 250 mm long aluminum alloy anodised sliding door bolt hasp staple (bolt type) and fixed clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section complete all as specified and directed.

M&L securing glass of any description in existing frame with putty including removing of old putty complete all as specified and directed.

S&F in repairs extruded aluminium alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed.

S&F in repairs 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F in repair 100 mm hinges MS Butt hinges medium weight cold rolled. complete all as specified and directed.

S&F in repair 75 mm hinges MS Butt hinges medium weight cold rolled. complete all as specified and directed.

S&F in repair 100 mm long aluminium handles, cast type anodied for alluminum windows complete all as specified and directed.

S&F 250mm long aluminum alloy anodized sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy all as spd and directed

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple etc in wooden/steel frames complete all as specified and directed.

S&F in repair 4 mm thick sheet glass in squares/rectangle in each pane fixed with wooden beads or putty (in metal/wooden frames etc) complete all as specified and directed.

S&F in repair 5.5mm thick sheet glass of any colour, ordinary quality and glazing with snap beading and gasket, neoprene packing etc. for aluminium door & window exc 0.5 Sqm in each pane. complete all as specified and directed.

Taking down and refixing of PVC/WPC/FRP door shutter (after taking down) loosened at joints of styles, by let in for making good and where hinges etc have been removed/loosened from chowkhets or frames and easing etc for complete functional complete all as specified and directed.

S&F in repair Mortice lock assembly verticle type with one set of lock Handles for fixing on both sides of wooden flush door, including 4 lever lock of required size complete all as specified and directed.

Dismantling boarding, any description, fixed in any positioin with nails complete all as specified

Providing and fixing GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 95x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bendingtiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for work including doors, gates, angle post etc. complete all as specified and directed by engr-in-charge

S & F Framed work as in Mild Steel Gate/Chowkhats of doors and windows of angle or other section with gusset plate, rails, braces, stair case, barreled iron doors,ladders; framed balusters; walk ways; railings; framework of water tanks, cover grills and similar work etc Fe.290.Gde-E-165 complete drilled for fixing of steel sheeting or other covering including welding work ,(PCC 1:1.5:3) etc to be prepared for hanging or sliding with and including either hooks,hinges,necessary holdfasts or steel hanging door fittings, locking arrangement, gate closer, stopper etc and hanging also fastening and fixing in building upto 8 mtr height complete all as spfd and directed by engr in charge.

S&F Mild Steel work in tubular trusses with round/square tubular pipes as in rafters, purlins, columns etc for Shed work including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as spfd and directed by engr in charge.

M&L for prepration of new steel @ iron surface over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, comlete all as specified and directed by Engr-in-Charge

M&L for Injecting nozzle packing: Drill and fixing injection packers in RCC members for cementitious grouting, drilling holes in structural members at the intervals as per recommendation/requirements, cleaning the holes by air blower prior to fixing nozzles. Insert 12 mm dia, 50-75mm long PVC or equivalent injection packers in cleaned holes with fast setting mortar like Renderoc Plug of Fosroc or equivalent in Asian paints/sika/pidilite. Cut the packers by cut of wheel after completion of the grouting without damaging structural elements. Injection Grounting: Supply and applying with pressure (mechanical means) plasticuised expanding grout admixed cementitious grouts Cebex 100 of FOSROC or equivalent in Sika/Pidilite/Asian paints having chloride contents-Nil as per BS:5075, Typical unrestrained expansion of upto 4% in general.The admixed should be mixed @225 gms per 50 Kg of cement.

M&L for hacking up the corners using suitable mean, later cleaning the same using water, followed by the application of Nitobond SBR latex or smartcare Repair polymer equivalent in Sika/pidilite/mixed slurry coat (1SBR:1water:3 cement) & later filling and making 100 mm*100mm concave coving using Nitobond SBR latex admixed PMM of FOSROC/smartcare Repair polymer SBR latex admixed PMM of Asian Paints or equivalent of sika/pidilite, including finishing, curing, all complete

M&L Waterproofing Treatment over mother slab as follow:- 1. Complete removal of existing wate proofing treatment including PCC padding / brick tiles/ brick coba and Mud Phaska etc. without damaging the eixisting slab complete all as directed and M&L for preparation of surfaces to achieve clean and sound concrete surfaces float finished and free from cavities and projecting nibs. All substrates should be dry clean and free of dust, plaster, oil,paint, grease, corrosion, deposits, and any other deleterious substances. Crackes/honey comb will be repaired by chasing open the area minimum 20mm depth in V-groove shape. All the chased substrate should be sound and cleaned using water. Smooth substrate must be mechanically roughened to provide an adequate key applying bond coat on the prepared surface with Nitobond SBR latex of FOSROC/smartcare repair polymer SBR latex of Asian paints/pidilite (Dr. Fixit Super Latex) or equivalent of Sika mixed slurry coat (1 SBR:1water:3 Cement). Reinstallement polymer modified mortar shall be complete within the overlay time of bonding coat. Later reinstating the chased area with Nitobond SBR latex admixed PMM, of FOSROC/Smartcare Repair polymer SBR latex admixed PMM of Asian paints/Pidilite (Dr. Fixit Pidicreate URP) or equivalent of sika inculding finsihing, curing, complete all as per manufacturer's instruction and directed by Engr-in-Charge. 2. Providing and applying 2 layers of FOSROC proofex Torchseal-3PI strandard or Asian paints smartcare APP membrane or equivanet in Sika/pidilite-3mm thick Non-woven polyster mat reinforced APP modified bituminious membrane. The system is applied in double layers (one in x-direction, other in y-direction). Membrane to be overlapped for 100 mm sideways and 150 mm at the end laps with each having followings specifications: a. Membrane thickness :3 mm (+/-10%) b. Tensile strenth ASTM D5147: >400N/5 CM(L&T) c. Tensile tear strenth ASTM D4073: 200N/5 CM d. Resistance to water pressure-DIN 52123: No Leak e. Elongation ASTM D5147 f. Water tightness (EN 1928-1) kPa: 60m System included Priming the substrate with Proofex Torchseal Primer/proofex smartcase bitumen Primer or equivalent in sika/pidilite (at consumption 0.4 litres/sqm), Provision and application of 3mm thick Proofex torchseal of fosroc/smartcare app membrane of Asian paints or equivalent in sika/pidilite in double layer and termination of the membrane at 450 mm from the roof level in groove of 50mmx50mm filled with Nitoseal PU 50 of Fosroc or smartcare hybrid PU sealant or equivalent in sika/pidilite.

M&L for providing and installing 300 GSM non-wooven geotextile membrane as a protection layer over the finish waterproofing treatment prior to protection screed complete all as specified and directed.

Providing and laying PCC of M20 grade mixed with approved water proofing compound like Conplast WLXtra of fosroc or smartcare VltaliaNEO of Asian paints or equivalent in sika/pidilite an advanced technology based, corrosion resistance admixed as per ASTM G1, IS 2645, JISZ 1535 mixing @ 200 ml/bag of cement, includig control joints (6mm wide and 10 mm deep) at every 3mx3m panel size, making angle fillet of 75mmx75mm using M20 grade concrete at the corners.

M&L for induced control joints as in roof filling in the screed concrete with sealant Fosroc nitoseal PU50/ Asian paints smartcare PU sealant or equivalent in sika/pidilite.

Providing and applying 15 mm thick cement plaster proportion 1:4 admixed with integral waterproofing admixed conplast WLXtra of FOSROC ot smartcare VLtaliaNEO of Asian paints or equivalent in Sika/pidilite an advanced technology based, corrosin resistance admixed as per IS2645, ASTM G1, JISZ 1535 mixing @ 200ml/bag of cement. This shall include all chamfering, rounding off of corners, protrusion and shall include shutttering cost or as per Engineer-in-charge specification. Cement and sand will be in client scope.

Supply only integral water proofing coumpound

Removal of demolished material /Debris/Malba from site outside Mod land from 5KM upto 20KM lead at municipal dumping ground including loading, unloading and stacking at the destination and dumping of same without any extra cost complete all as specified and directed by Engineer-in-Charge.

M&L for decorative wall panelling with PVC louvered/Fluted/Plain 2D/3D wall panels with plastic and silicate mixture as the core material with inand surface with PVC foil on the top with thickness of panel 10mm to 20mm, width of 150mm to 200mm and length of 2.74/3.05 (9' or 10') meters of POLYWOOD or equivalent brand Wt of PVC pannel is 4.5 kg/sqm and PVC percentage in wall panels is more than 40% including necessary L/H/U corner profile and fillets. WPC Wall panel are termite proof , water proof and usable on the damp walls, fixed to wall/ ceiling surface as per manufacturer instruction complete all as specified and directed by Engr-in-charge. Note:The rates are inclusive of corner profiles and fillets

S&F 25 mm thick stainless steel decorative curtain rods including brackets fixed to walls to stainless steel screws complete all as specified and directed

Supply only end funnels/lattoo decorative type complete all as specified and directed

STAR CONSTRUCTION CO (BID ID -3468963)

M/s Shubh Enterprises (BID ID -3468636)

KKP Enterprises (BID ID -3468302)

S GOURAV PRAKASH ENTERPRISES (BID ID -3472955)

POONAM ENTERPRISES (BID ID -3473807)

MB Enterprises (BID ID -3473637)