SPECIAL REPAIRS TO BLDG NO T-273 NURSING OFFRS MESS AND SINGLE NURSING OFFRS LIVING ACCN AT MH KAMPTEE

Amount

Dismantling of asbestos cement sheet (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified and directed.

M&L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet of any colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw complete all as per manufacturer instructions complete all as specified and directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F mild steel work such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/loose soil complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B2 (Using 40mm graded stone agg) in foundation, mass concrete and filiings complete all as specified and directed.

S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc.Fe-290(Gde E-165), complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with Screw complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall paneling including cover fillets, complete all as specified and directed.

S&F 5 to 6 mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling in multiple layers made of G.I. grid as per manufacture instruction,specification and drawing incl GI grid complete all as specified and directed.

M&L for 12mm thick POP false ceiling in multiple layers as per manufacture instruction, specification and drawing including GI grid complete all as specified and directed.

Demolition of RCC in Roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work, complete all as specified and directed.

M&L for providing precast cement concrete type B1 1:2:4 (20mm graded aggregate) set in CM 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas,water roughs, mangers, shelves and similar articles with plain faces, complete all as specified and directed.

S&F mild steel TMT bars 10 mm dia and over , cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m as directed by the Engineer-in-Charge

M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

All as per item No 17 above but half brick wall in CM 1:4 complete all as specified and directed.

Taking down cement Plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 on internal walls finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces with CM 1:4 with liquid WPC on external walls finished even and smooth (without using extra cement) complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for rendering 5mm thick on fair faces of brick work or concrete surfaces with CM 1:3 on ceiling surfaces finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including prepration of surfaces complete all as specified and directed

M & L for prepartion of new plastered surface of wall and applying two coats of oil bound distemper over a coat of Primer over a coats of wall care putty complete all as specified and directed.

M&L for applying three coats of white wash on undecorated ceiling surfaces complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar beddeing (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 300mm x 450mm, on vertical surface such as skirtings/dados set and jointed in neat cement slurry and pointed in coloured cement to match and incl.10mm thick backing coat in CM 1:3 finished even and fair complete all as specified.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular), polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:4 (including bodder tile) complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular), polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl.10mm thick backing coat in CM 1:3 finished even and fair complete all as specified.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular), polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:4 (including bodder tile) complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular), polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl.10mm thick backing coat in CM 1:3 finished even and fair complete all as specified.

Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed.

S&F pre-polished granite 20mm thick fixed on platform/shelves/steps/cill,etc over 20mm thick screed bed in cement mortar 1:4 including necessary moulding etc complete all as directed.

M&L for machine cut cudappah stone slab 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other simillar situation, complete all as specified and directed.

Labour only for Taking down door shutter of any description & size and refixing in the same opening after necessary repair required for smooth functioning complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed.

Taking down door / window frame with shutter (without taking of shutter from the frame) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed.

Taking down door / window frame with shutter (without taking of shutter from the frame ) area n. exc 1.50 sqm complete all as specified and directed.

S&F 35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete.

S&F IInd class hard-wood, small fittings such as bracket of any sizes, hinge blocks, cleats, door/window stoppers and like articles not exceeding 200 cubic centimetres each complete all as specified and directed.

S&F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness size and quality and description) from wooden/ steel/ aluminium frames glazed with putty or fixed with beads etc complete all as specified and directed

M&L for 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each panes complete all as specifed and directed.

M&L for preparation of old wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified and directed.

M&L for complete removal of existing treatment of old wooden surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S & F 100 mm long SS butt hinges and fixed with screw/welded to frames etc all as specified and as directed.

S&F 125 mm SS handles complete all as specified and directed.

S & F 150 mm long SS handles complete all as specified and directed

S & F 250 mm SS, sliding door bolt, fixed complete all as specified and directed.

S&F 200mm long stainless steel barrel tower bolts complete all as specified and directed.

Supply, fabrication and fixing anodised aluminium doors fixed or openable including frame/chowkats etc from hollow rectangular sections like chowkats of size 100 x 44mm x 1.59mm (appx), vertical styles of size 82 x 44 x 1.59mm (appx) top and middle rails of size 82 x 44 x 1.59mm (appx) bottom rails of size 114 x 44 x 1.59mm (appx) complete including necessary jointing cleats, glazing clips, anodised aluminium beading and rubber gasket etc for securing glass, anodised aluminium fittings such as handles, other standard fittings, aluminium tower bolts - 2 Nos, Hydraulic Door closer of designation No-3 - 01 No and accessories for locking arrangements etc complete all as specified and directed. Note:- Glazing shall be measured and paid for separately under respective items complete all as specified and directed.

S&F aluminium (colour powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement Notes: (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint Make of Aluminium Sections powder coated : Jindal or equivalent

M&L for aluminium (anodised) grill made out of 5mm wide flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm (Section 8778) complete all as per manufacturer's catalogue 7 specifications (Make: Grill No. 20 of 'DECO GRILL' or equivalent) complete all as specified and directed.

S&F colour powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F colour powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1no.) complete all as specified and directed.

S&F 5.5 mm thick tinted sheet glass ordinary quality and glazing with Al glazing clips& EPDM beading in square exc 0.5 sqm in each pane,complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

Demolition of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as spd and directed.

M&L for providing 75 mm th cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) as in sub base complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete incl border of marble all as specified and directed.

S&F in repairs 25mm dia stainless steel curtain rod of approved quality including cutting and fixing to curtain brackets complete all as specified and directed

S&F fancy type curtain brackets of approved quality fixed to wall with screws complete all as specified and directed.

S&F GI tubing 15 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified

S&F GI tubing 20mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified

S&F GI tubing 25mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified

S&F GI tubing 32mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified

S & F waste fitting, 32mm/40mm brass, chromium plated for sink, basin, etc with long screwd shank and fly nut compete.

S&F in repair sinks with drainage board made of stainless steel thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm incl waste pipe 32mm dia complete all as specified and directed.

S&F in repairs one piece vitreous china wash down water closet 'P' trap round of size 670 x 365 x 740 mm along with soft close seat cover and twin flush white colour with all fittings including joining mild steel CP or aluminimised hinging device,complete all as specified and directed. Make: CERA cat No S1013201 or equivalent of Hindware/Prayag/Jaguar.

S&F in repair Wash Basin oval type (56x41cm), (Make : Hindware) (CAT No. F-10017 or equivalent in CERA) including Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and directed

Supply only pillar cock, Swan neck central hole basin mixer with hot/cold connection without pop up waste system complete all as specified and directed. Make:- Prayag Cat part No 8750 or equivalent in Hindware / Cera.

S&F in repair PVC connection 15 mm dia, 450 mm long including PTMT check nut, complete all as specified and directed.

S&F in repairs stop valve/ angle cock 15mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type, complete all as specified and directed.

S&F in repairs 2-way angle cock with flange 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type, complete all as specified and directed. Make:- Prayag Cat part No 7711 or equivalent.

S&F in repairs bib tap 15 mm dia cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed for iron pipe or for brass ferrule complete all as specified

S&F in repair towel rail complete all as specified and directed. Make:- Prayag Cat part No BA-40 or equivalent in Hindware / Cera.

S&F in repair wall mixer, 3 in 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs & wall flange including showers both hand and over head,complete all as specified and directed. Make:- Jaquar cat part No FUS-29281 or equivalent.

S&F in repair toilet paper holder complete all as specified and directed. Make:- Prayag Cat part No BA-48 or equivalent.

S & F in repair health faucet of 15 mm bore brass cromium plated including PVC pipe to connection GI tubing 15 mm bore all complete all as specified and directed. (Make: Prayag cat no BEA-40.

S&F in repairs Soap dish, CP 125mm size fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs cabinet mirror 400x 500 mm for bathrooms complete all as specified and directed. Make : Prayag Cat Part No 551 eqavanent

S&F in repair glass shelf 500x125mm with brackets complete all as specified and directed. Make:- Prayag Cat No BEA-45 or equivalent.

S&F in repair corner sheet glass shelf assemble consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed. Make prayag cat No BEA 44 or equivalent

S&F in repairs 40mm bore of pipe low density polyethylene pipe (LDPE) of pressure rating 6kg/cm fixed complete all as specified and directed.

M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair PVC (SWR) gully trap 125/110 mm , setting and jointing with solvent cement complete all as specified and directed.

S&F in repair 75 PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls with stack clamp every one mtr apart complete all as specified and as directed.

S&F 110mm PVC (SWR) bends any radius with oval access door complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius with oval access door complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F PVC cowl slotted vent cowl 110 mm size complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed of 5000 litres capacity.

Dismantling water tank of capacity exc 250 ltr & not exc 500 ltrs and removing to store of any description complete all as specified and directed.

Dismantling water tank of capacity exc 500 ltr & not exc 1000 ltrs and removing to store of any description complete all as specified and directed.

S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks white colour triple layers (Cylindrical vertical with closed top) hoisted and fixed in position including connections and 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms/ 20mm-210 gms./ 25mm-455gms) etc, complete all as specified and directed.

S&F ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe of size 25mm dia complete all as specifed and directed.

S&F in repair CP grating of size 100mm dia complete all as specifed and directed complete all as specifed and directed.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and directed.

Cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth in cement mortar 1:3.

M&L for cement concrete type B0, (1:2:4) (using 12.5mm graded stone aggregate) as in benching/coping and the like including weathering slightly round or chamfered angles and throating complete all as specified and directed.

S&F providing fanhooks for ceiling fans with suitable suspender complete all as specified and directed .

S&F 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive fixed in Aluminium doors,etc complete all as specified and as directed .

S&F in repair Continuous (piano) hinges, SS, bright finish with 30 mm width of flaps (When open), complete all as specified and directed.

S&F magnetic catcher of size 20mmx50mm suitable for cup board shutters complete all as specified and as directed.

M&L for 4.0 mm thick frosted sheet glass ordinary quality and glazing with oil putty in square n.exceeding 0.5 Sqm in each panes complete all as specifed and directed.

M&L providing 25mm thick cement concrete 1:2:4 type B1 (Using 20mm graded stone agg) , as in sub base in floor/paving etc complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3-Earthwork) to a distance of 5KM, beyond the lead included in the rates, including loading, unloading and stacking at the destination

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/ buzzer, bell push, tube light fitting, regulator etc and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/ colour washing/ distemper to match with existing wall/ floor/ ceiling finishes complete all as specified and directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed in wall/ ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No 124 above but one ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed.

All as per item No 124 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 124 above but one 3 pin 5 amp socket out point on the independent board with other switches complete all as specified and directed.

All as per item No 124 above but one bell / buzzer point complete all as specified and directed.

All as per item No 124 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20mm medium grade concealed in wall of size 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and directed. Note :- (i) Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make. (ii) 1x4 Sqmm + 2x4 Sqmm wire + 1 Run PVC conduit pipe shall be measured in one unit RM.

S&F for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes complete all as specified and directed. Make :- Anchor / Roma / Legrand / Crabtree

S&F for socket modular type single pole one way 6 amp 2 module 2/3 pin 250 volts AC suitable for modular switch boxes complete all as specified and directed. Make :- Anchor / Roma / Legrand / Crabtree

S&F for switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes complete all as specified and directed. Make :- Anchor / Roma / Legrand / Crabtree

S&F for socket modular type single pole one way 6/16 amp 2/3 pin 2 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed. Make :- Anchor / Roma / Legrand / Crabtree

S&F ceiling rose surface type 3 terminal 5 amps complete all as specified and directed.

S&F electric bell ding dong AC 230V single phase complete all as specified and directed.

S&F bell push switch modular type single pole one way 5 amp 240 volts complete all as specified and directed.

S&F 4 step 2 module modular type electronic regulators for ceiling fan 1200/ 1400mm sweep, 240 volts, 120 watt single pole complete all as specified and directed.

S&F LED post top light fitting 20W with all fixing accessories fitted on pilar or poles complete all as specified and directed. Make:- CG cat No LPTO-20-CDL or in Philips / Wipro

S&F 18-20 Watt LED batten / surface constructed of fire retardant engineering grade extruded aluminum body 100 lumen per watt, min 2000 lumen and decorative end cap complete with driver including 3 core 1 sqmm copper conductor cable for connection and accessories complete all as specified and directed. Make: CG LDC-20-CDL or in Philips/ Bajaj / Luker / Halonix

S&F lamp holder insulated body with back plate for angle / batten fitting complete all as specified and directed.

S&F LED light fitting 9W bulk head luminaires with lamp holders etc complete with all accessories and including connecting upto with twin core twisted flexible cable of suitable size of 230V 50Hz complete all as specified and directed. Make: Bajaj Cat No BIBWP 10W / CG Cat No LLBHP 10 CDL / Wipro / Philips / Surya

S&F building security light LED 25 W with Lumen O/P 1800 with driver with rated cvoltage 240 V, 50Hz, including mounting GI (made out of 25mm dia grade pipe 0.8 m bent two shape including FI clamps nout bolts etc complete all as specified and directed.

S&F LED baton fitting 2' length including drivers having energy consumption 10/11W, 230V, 50Hz, 65ooK not less than 800 lumen prewired complete all as specified and directed. Make:- CG Cat No LDL-10-CDL or in Wipro / Philips / Luker / Halonix

S&F exhaust fan 230mm sweep, plastic body 250V, 50Hz including grouting bolts etc and making holes complete all as specified and directed.

S&F MCCB TPN 63 amps 415 volts 50Hz 16KA connecting with incomer cable using suitable size lugs as required and connection to main DB using 10 sqmm x 4 FRLSH copper conductor complete all as specified and directed.

S&F MCCB enclosure suitable for MCCB 63A, made out of CRCA sheet complete with all connection complete all as specified and directed.

S&F MCB triple pole & neutral 240 volt 6 to 40 amps 10 KA complete all as specified and directed. Make :- Legrand / Havells /L&T

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 litre, BEE 5 star rated including temperature control knob and temperature indicator complete with all accessories such as safety valve, thermostat, NRV, connection pipe etc complete all as specified and directed. Make:- Racold / Jaquar / Havells

S&F energy meter boxes suitable to accommodate single phase energy meter with complete fixing of meters complete all as specified and directed. Make:- Ship / Hensel

S&F sheet metal enclosure single pole & neutral for 240 volts 12 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed. Make :- Legrand / Havells /L&T

S&F sheet metal enclosure single pole & neutral for 240 volts 4/6 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed. Make :- Legrand / Havells /L&T

S&F MCB single pole 240 volt 6 to 40 amps 10 KA breaking capacity 'C' series complete all as specified and directed. Make:- Legrand / Havells / L&T

S&F MCB single pole and neutral 240 volt 6 to 40 amps 10 KA breaking capacity 'C' series complete all as specified and directed. Make:- Legrand / Havells / L&T

M&L for earthing complete with galvanized street earth plate electrode 600 x 600 x 6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete (1:2:4) type B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC (1:2:4) reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.47,147.00]

M/s Rahul Traders

Bidder Name

DEESHA CONSTRUCTIONS

M/s Rahul Traders