PROVN OF PATHWAY AT CERTAIN LOCATION AT DHARMUND UNDER AGE (I) BHALRA

Amount

Excavation in post holes (or similar holes) each not exc. 0.50 cum, in any type of soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25cm, watering and removal of excavated materials to a distance n. exc. 50m and making good surfaces, complete all as specified & directed.

Material and labour for PCC 1:4:8 (nominal mix), type D-2 using 40mm graded stone aggregate as in foundations, filling, mass concrete and sub base of floor, complete all as specified & directed.

Supply and fixing of Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of Rolled mild steel work in roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-410-W(Gde-E-250) quality-B, complete all as specified & directed.

Supply and fixing of rolled mild steel framed work as in plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment, conforming to Fe-410-W(Gde-E-250) quality-B, complete all as specified & directed.

Material and labour for prepration of new or previously untreated steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified & directed.

Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified.

Material and labour for hard core of gauge not exc 63mm using broken stone or boulders, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface, complete all as specified.

Material and labour for PCC 1:2:4, type B-1, using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

Material and labour for designer chequred tiles (factory made rectified) of szie 300x300x25mm, top layer made of any type of cement and pigment in rquired patterns (compressive strength not less than 250 kg per Sqm) as approved by AGE(I) set, jointed and pointed in neat cement slurry, laid in floors, over and including 15mm thick screed bed or bedding layer of cement mortar 1:4, complete all as specified.

Material and labour for 100m thick plain cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.

SAHIL PROCH (BID ID -3157110)

SWASTIK TRADERS (BID ID -3156395)