REPAIRS TO JOINERY, FLOORING AND CERTAIN OTHER B/R WROKS AT AIR FORCE STATION NATHATOP UNDER GE (AF) UDHAMPUR

Amount

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frame), complete all as specified and as directed.

All as per item No (1) here-in-before but exc 1.5 sqm but n.exc 4sqm each complete all as specified and as directed.

Taking down shutters of any description n.exc 1sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1sqm but not exc 2.00 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each and refixing in the same opening after easing and adjusting complete all as specified and as directed.

Taking down shutters of any description n.exc 1 sqm each and refixing in the same opening after easing and adjusting complete all as specified and as directed.

Resecuring or easing and adjusting without taking down shutters of any description n.exc 1 sqm each complete all as specified and as directed.

Resecuring or easing and adjusting without taking down shutters of any description exc 1 sqm but n.exc. 2 sqm each complete all as specified and as directed.

Repair to existing aluminium door by replacing of rubber beading, aluminium beading, screws, replacement of glass and other accessories like door closer, hinges as reqd and making door functional incl taking down if reqd and reassemble door complete all as specified and directed. Note- door closer, floor spring, glasspanes will be measured separately.

Repair to existing sliding/openable aluminium window by replacing of rubber beading, aluminium beading, screws, replacement of glass and other accessories like aluminium snap beading, rubber gasket glazing clips, hinges as reqd and making window functional incl taking down if reqd and reassemble window complete all as specified and directed. Note- Glass panes will be measured separately.

Dismantling of existing distrubed GI pipe as snow marker along the road side and refixing and making good in ground embeded in PCC 1:3:6 type C-2 using 40mm graded stone agg as in foundation and mass concrete including painting of colour choice all as specified and directed

M & L for Second class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S & F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSR complete all as specified and as directed.

M & L for Second class hardwood glazed and skelton shutters 30mm thick, as in windows, open rebated and prepared to receive glass, gauze etc. divided into squares, with edges of framing plain, chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitred beads for securing glass gauze etc, sizes of members of shutters as specified in SSR Part I section 8, clause 8.24(b) and fitted to chowkats, complete all as specified and as directed.

S & F 35mm thick factory made Second class hardwood, plain framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers, etc all as specified and as directed.

S&F Factory made solid Panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for styles and Plain colour sheet PVC for top rails, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail supplied and fixed as per SSR instructions and as directed by Engineer-in-Charge.

S & F Anodised Aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified.

S & f anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats ,glazing cleaps,rubber neoprene packing ,handles 02 nos in each door ,hinges,aluminium anodised snap beading scews etc complete all as specified and directed.

S & F anodised aluminium window and ventilator shutters, side hung type/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S & F aluminum anodised barrel tower bolts, bearing ISI mark, of extruded section 200 mm long complete all as specified and as directed.

All as per Item No (20) here-in-before but 150 mm long.

S & F in repairs aluminum anodised barrel tower bolts of extruded section 100mm long, bearing ISI mark, complete all as specified and as directed.

All as per item No. (22) here in before but 150mm long. complete all as specified and as directed.

S & F Aluminum aodised sliding door bolts, bearing ISI mark, 300mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S & F in repairs aluminum aodised sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, bearing ISI mark. complete all as specified and directed.

S & F Butt Hinges medium weight cold rolled mild steel, bearing ISI mark, 100 mm long complete all as specified and as directed.

All as per Item No (26) here-in-before but 75mm long.

S & F Aluminum anodised bow handle, bearing ISI mark, fabricated type extruded section of 100mm long complete all as specified and as directed.

All as per item No (28) here-in-before but 150mm long.

S & F in repairs aluminum anodised handle fabricated type extruded section of 100mm long, bearing ISI mark, complete all as specified and as directed.

All as per item No (30) here-in-before but 150mm long.

S & F in repairs mortice lock brass 4 levers vertical type, size 100mm complete all as specified and as directed.

S & F in repairs 150 mm over all length of cover plate of floor door stopper, bearing ISI mark, of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and as directed.

S & F in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

Running welding in repairs, thickness of metal to be welded not exc 6mm complete all as specified and as directed.

Welding in repairs exc 2.5cm and not exc 5cm in length and thickness of metal to be welded not exc 6mm complete all as specified and as directed.

Dismantling structural steel work including doors, gates of opening area n.exc 30.00 sqm each but excluding framed truss etc. complete all as specified and as directed.

S & F steel rolling shutters 1.25mm thk of laths push pull or manual type of opening area n.exc 30.00 sqm each ,without ball bearing,as specified including top cover, anchoring rod, hasp and staple and , erected in position as indicated complete all as specifeid and as directed.

S & F steel rolling shutters 1.25mm thk of laths gear operated type of opening area n.exc 30.00 sqm each with bevel gear box and crank handle as specified including top cover, anchoring rod, hasp and staple and , erected in position as indicated complete all as specifeid and as directed.

Dismantling boarding of any description fixed in any position with nails, complete all as specified and as directed.

M & L for 12mm thick Plywood,grade BWR type BB fixed with nails/ screw complete all as specified and directed.

M & L for 18/19mm thick prelaminated particle board exterior grade,one side laminated with decorative choice and other side balancing white lamination fixed with screws to timber frames work for shutters of ward robes ,cabinets , shelves including edging with teak wood beading & painting to match complete all as specified and as directed.

M & L for Framed work as in grills with ends of bars shoulders or framed guard bars and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M & L applying one coats spray painting of anti corrosive paint with complete all preparation complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete at height upto 20.00 mtr from avg GL (including scaffolding if required) of all type building complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces exc 10 cm width or girth, including preparation of surfaces, complete in any height (including scaffolding if required) of all type building all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel/Al frames complete all as specified and directed.

M & L for Sheet glass 5.5mm thk, ordinary quality and glazing with oil putty/ beading in square exc. 0.50 sqm in each pane complete all as specified and directed.

S&F 4mm thick glass sheet oridinary quantity n.exc. 0.50 Sqm each pane in steel or wooden frames complete with fixing materials such as putty, glazing pins, wooden beads etc. complete all as specified and directed.

M&L 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in square n. exc. 0.5 Sqm in each pane complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified & directed.

M&L for reinforced cement concrete 1:2:4 type B-1 using (20mm graded aggregate) as in Slab and the like complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping ends and binding with and incl mild steel wire ( annealed ) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

Use and waste of formwork to side and soffits of RCC slab including finish the surface fair complete all as specified & dirceted.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L Coloured glazed ceramic tiles glossy finish of size 300x450x7mm thick in dado’s/skirting etc. lais over 10 mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white cement to match the colour of tiles complete and all as specified and directed.

M&L 10 mm thick light shade Vitrified tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. laid over 15mm thick screed bed or bedding layer in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile, etc complete all as specified and directed.

M&L 10 mm thick light shade Vitrified tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm laid over 15mm thick screed bed or bedding layer in cement mortar1:4 as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile, etc complete all as specified and directed.

M&L chequred cement concrete tiles of size 30cm X 30 cm X 25mm thick, laid over 15mm thick screed bed or bedding layer in cement mortar 1:6 with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

M&L for coloured non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.11 sqm, in floors etc. laid over 15mm thick screed bed or bedding layer in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thick (unreinforced) (below or above ground level) complete all as specified and as directed.

M&L 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded aggregate) as in sub base of floor complete all as specified and directed.

M&L 25mm th PCC 1:2:4 type BO (using 12.50 mm graded aggregate) laid below floor tiles complete all as specified and dirceted.

Demolition of cement concrete of any description and any position not otherwise specifically provided complete all as specified.

Material and Labour for PCC 1:2:4 Type B1 ( using 20 mm graded stone aggregate ) as in coping/ kerbs including necessary formwork complete all as specified and as directed .

Dismantling timber scantling as in flooring complete all as specified and as directed.

M&L 2nd class hard wood in scantling as in flooring fixed with screw/ bolts complete all as spccified and directed.

M & L for 50mm thick 2nd class hardwood clean sawn boards or planks, width n exc. 20 cm as directed by Engineer in Charge.

M&L in repairs for Linoleum sheet 2 mm thick, plain coloured, laid dry in floors including stretching, cutting and fitting and sealed down with approved adhesive including removal of old detorated linoleum flooring and preparation of surface complete all as specified and directed by engr-in-charge.

S & F continous (Piano) hinge 40 mm wide , mild steel, bright finish or electrogalvanised complete all as specified and directed.

Demolition of Brick/ stone / boulder masonry built in cement morter complete all as specified and directed .

M&L for half brickwork with sub class B brick built in CM 1:4 complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick/concrete or stone surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of brick/concrete or stone surfaces in cement mortar 1:4 and finished even and fair with water proofing compound complete all as specified and as directed. Note:-Water proofing compound shall be measured and paid separately under the respective item.

Supply only water proofing compound

M&L for two coats of exterior acrylic paint of any shade in camouflage pattern over a coat of primer as approved by GE on new plastered surfaces of walls and the like etc including preparation of new plastered surfaces complete all as specified and directed.

Material and labour for applying three coats of white wash on new plastered surface of wall including preperation of newly plastered surface complete all as specified and as directed .

Supply and fix in repairs 15 mm CP Bib taps, fancy type cast copper alloy with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fix in repairs PVC connection 15 mm dia with PTMT nut of length 600 mm complete all as specified and as directed.

Supply and fix in repairs 15 mm CP Stop valves/Angle cock , fancy type cast copper alloy screwed down, high pressure, with crutch handle (concealed type), screwed both ends and fixed complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) floor trap, plain with grating 75mm dia including jointing with solvent cement , complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store with all fittings for 15 mm bore GI tubing complete all as specified and as directed.

Supply and fix GI tubing medium grade 15mm bore dia with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fix in repairs Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed.

S&F in repairs vitreous china water closet Padestal pattern( white ) with seat cover excluding fixing bolts, flushing cistern and flush pipe complete all as directed.

Supply and fix in repairs 10 ltrs capacity (PVC), valve less, syphonic action type, fluhsing cistern, low level, white, with inlet, ball valve, float and handle including brackets,incl PVC 32mm flush pipe, etc, complete all as specified and directed.

S&F in repair vitreous china,white, wash hand basin with pedestal, flat back size 550x400mm 'including MS brackets,pillar tap fancy type including cutting for and pinning complete all as specified and as directed.

Supply and fix in repairs brass chromium plated shower rose 125mm dia with or without swivel joints any size including fixing to steel pipe of 15mm bore complete all as specified and directed.

Supply and fix in repairs vitreous china water closet (squatt type) orrisa pattern 580x440 mm size pan, white with front or back inlet with integral 'foot rests including provn of lime concrete bedding fixing of PVC "P'' trap 110 mm bore and connections to 'flushing cistern/pipe complete all as specified and directed.

Supply and fix in repairs 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floors including clamps complete all as specified and directed.

RAJ MOHD

MAHAJAN TRADING CO

M/S ASHOK KUMAR PACHIALA

RANBIR ENTERPRISES

M/S SUSHEEL KUMAR Govt. CONTRACTOR

rajkumar sharma

TARUN BUILDERS