PROVN OF FENCING WITH GATE FOR DEMARCATION OF TECHNICAL AND DOMESTIC AREA (PH-I) AND VISITOR SHED AT AF STN DINJAN UNDER GE (AF) MOHANBARI

Amount

Excavating in post holes (or similar holes) each n.exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering ,and removing surplus soil to a distance n.exc 50 m and making good surface in soft /loose soil complete all as specified and directed.

S&F for providing reinforced cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 Sqcm but not 250 Sqcm, with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and directed.

S&F for mild steel posts and struts in fencing and flat iron of any size including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for TMT bars 10mm dia and above cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for TMT bars 8 mm dia as in reinforcement and over upto 10 mm dia cut to length bend to shape as required including cranking as in stirrups and nibs (6 mm dia) complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C2 (40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Supply only chain link fencing made out of 3.15 mm dia galvanised iron wire of mesh 75 mm x 75 mm size made complete all as specified and directed.

Straining and fixing only chain link fencing to RCC posts fixed with MS flat and 4 Nos of 10 mm dia MS bars as including line wires,any mesh,size and type to any type of standards, rails, straining bolts,etc incl provn of binding wire complete all as specified and directed. Note: MS flat and MS bars to be measured and paid seperately.

M&L for Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails, straing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc (each line wire to be measured) complete all as specified and directed.

M&L for Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel screw bolts diameter of neck 11 to 15 mm(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long but n exc 10 cm long complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preperation for newly steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft / loose soil complete all as specified and directed.

M&L for cement concrete type D-2 1:4:8 (40mm graded stone aggregate) in foundations filling mass concrete complete all as specified and directed.

Form work to sides of concrete foundation, footing, bases of colums, raft and raft beams, slides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter rough finished surface of concrete complete all as specified and directed.

Formwork to sides of pillers, posts, struts, piers, columns and stanchions, square,rectangular or polygonal for rough finished surfaces of concrete complete all as specified and directed.

M&L for RCC M-25 (design mix) 20mm graded stone aggregate in foundation incl rafts, footing, foundation beams, plinth beam, bases of column etc. basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M-25 (20mm graded stone aggregate) design mix in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for framed work such as framed and hung as gates ornamental and intricate design etc, including pintle hinges, stops, hand-made sliding bolts, etc conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc n.exc 10 Kg each brackets, Conforming to F-290, Gde-E-165 complete all as specified and directed.

M&L for mild steel roller of dia approx 100mm with guide roller and appropriate size of bearing having a load capacity min 300 Kg of each complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preperation for newly steel surfaces of any description over 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed.

Demolition of cement concrete(unreiforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (20 mm graded stone aggregate) as in mud stop rounded or chamfered on edge complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces and finished rough to receive wall finishes in cement mortar 1:4 complete all as specified and directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint of any tint/ shade complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Surface dressing n.exc 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for provision of PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping incl all necessary form work complete all as specified and directed.

M&L for damp proof course to horizontal or vertical surfaces including necessary formwork, 40mm thick, in cement concrete 1:2:4 type B0 complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and directed.

M&L for PCC 1:4:8 type D2, 100mm thick (using 40mm graded stone aggregate) as in sub base in flooring work complete all as specified and directed.

M&L for PCC 1:2:4 type B1, 25mm thick (using 20 mm graded stone aggregate) as in flooring work complete all as specified and directed.

S&F for tubular roof trusses (framed) trussed, purlins, crane gantries, rails nad fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pleces, cleats etc complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 10cm long dia bolt 16 to 20mm complete all as specified and directed.

M&L for high strength deformed TMT steel bars 6-8mm dia and over as in reinforcement cut to length, bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for brick work with sub class 'B' bricks built in cement mortar 1:6 straight or curved on plan & exc 6 m mean radius with old size bricks complete all as specified and directed.

M&L for brick work with sub class 'B' bricks built in cement mortar 1:4 straight or curved on plan to any radius with old size bricks in half brick th walls complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on brick/ concrete surface as in external wall surface etc, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on brick/concrete surface on other than fair faces as in internal wall surface etc, finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying three coats of white wash on newly plastered wall surfaces incl preparation of surfaces complete all as specified and directed.

M&L for applying two coats of cement based paint over a coat of primer on newly plastered wall surfaces incl preparation of surfaces complete all as specified and directed.

M&L for broken stone as hard core of gauge n.exc 63mm, deposited, spread and leveled in layers n.exc 150mm thick, watered and rammed to true surface complete all as specified and directed.

M&L for plain cement concrete type C-1 (1:3:6), using 40 mm graded crushed stone aggregate, 50 mm thick, as in plinth protection, pathway finished even and fair without using extra cement complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (20mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likes complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match. over 15 mm thick screeding in cement mortar 1:4 complete all as specified and directed. Note: screed bed shall also deemed to be included in the quoted rate by the contractor.

M/S RK Trading (BID ID -3400809)

M/S N K SAI TRADING (BID ID -3401045)

M/S D G ENTERPRISE (BID ID -3400750)

HIND CONSTRUCTION (BID ID -3400229)

M/S P.K.B.CONSTRUCTION (BID ID -3400410)

FREEZCON (BID ID -3400199)

M/S S.A.Electrics (BID ID -3401229)