REPAIR OFSUNKEN FLOORING RUSTED PIPELINES AND CONNECTED WORKS IN AGV AND CHARARI AREA AT AFS CHAKERI KANPUR

Amount

Repairs to leaking water in bib taps, pillar taps stop cock, angle valve, PVC connection waste pipes, float valves, concealed stop cock, GI pipe joints bottle traps etc of any description by changing the washers etc or any other minor accessories to make the system functional and if reapair by the spindel complete all as specified and directed. Note : Spindal sholuld be measured & paid separatley in relevent items of Sch 'A'.

Supply only brass spindal of any make complete all as apecified and directed.

Removal of air lock / blockage of water in GI, tubing 15 mm / 32mm/50mm bore cleaning the pipe or fittings etc and re-fixing the same in position complete all as specified and directed.

S&F in repair small fitting of galvanized iron medium grade such as socket, elbow, nipple or different sizes Tee, union reducer etc for 15mm bore pipe complete all as specified and directed.

S&F in repairs internal flushing kit of PVC low level flushing cistern and making in functional complete all as specified and dircted .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M& L for 7 to 8 mm thick non skid coloured ceramic tiles (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick Screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and directed.

M& L for glazed coloured ceramic tiles of size 300mmx450mmx7mm or as required size at site as in dado/shirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) on fair faces of brick work/concrete surfaces complete all as specified and dierected

M & L for 16-18 mm thick marble work (table rubbed and polished) as in cooking platform and like jointer in cement mortar (1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble shade other than white and black over and including15mm thick Screed bed or bedding layer for laying floor finishes in CM (1:6) including rounding edges complete all as specified and directed.

M & L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded stone agg as in sub base finished rough to receive topping layer complete all as specified and directed

Dismantling of existing sunken treatment including plaster and M&L for water proofing treatment on existing sunken portion with the following specification complete all as specified and diirected - (a) 15 mm thick (average) plaster on sunken floor in CM (1:4) with waterproofing compound as per manufacturer instruction complete all as specified & directed.(b) M&L for providing two coat of master seal 550 or equivalent to prevent leakage/seepage through sunken floor over prepared surfaces complete all as specified and directed.(vi) One spout of 40mm GI Pipe Shall be provided in Sunken floor and sunken portion shall be filled with PCC(1:5:10) type E-2 using 40 mm graded stone aggregate complete all as specified and directed . Note- Only plan of the floor area shall be measured and paid.

S & F 100 mm bore cast iron sanitary connection socket fixed to WC outlet etc complete all as specified.

S & F ir repair 15 mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed to wall or in floors including cutting threading and making forged bends on pipes MS hooks etc in any position (i.e concealed) complete all as specified and directed.

Cutting chases, pinnng-in in the brick walls making good to faciing where required and pointing in cement mortar (1:3) for concealed water tubing, and crossing one side of wall to another side by cutting or drilling exceeding 10 cm but not exceeding 50 cm girth complete all as specified and directed.

S&F in repairs GI tubing 32 mm bore medium grade with all fittiings fixed to wall or laid in floor complete all as specified and as directed. (UPTO 4TH STOREY)

S&F in repairs GI tubing 32 mm bore medium grade with all fittiings fixed to wall or laid in floor complete all as specified and as directed. (FROM 5TH TO 8TH STOREY)

S&F in repairs GI tubing 32 mm bore medium grade with all fittiings fixed to wall or laid in floor complete all as specified and as directed.(FROM 9TH TO 12TH STOREY)

S&F in repairs GI tubing 50 mm bore medium grade with all fittiings fixed to wall or laid in floor complete all as specified and as directed. (UP TO 12TH STOREY)

S & F in repair gun metal globe or gate valve for 32 mm bore pipe with iron wheel and screwed both ends for iron pipes complete all as specified and directed.

S&F in repair gun globe or gate valve for 50 mm bore pipe with iron wheel and screwed both ends for iron pipes complete all as specified and directed.

Taking down cement plaster or cement lime plaster of any description on bricks or stone walls etc incl raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed .

M & L for 10mm thick plaster in CM 1:6 finished surfaces even & smooth without using extra cement 2 coat of OBD over and including 1 mm thick (average) wall care complete all as specified and directed.

M & L for rendering 5 mm thick on ceiling surfaces in cement mortar (1:3) finished even and smooth without using extra cement and applying two coats of ODB over and including 1 mm thick (average) wall care putty complete all as specified and directed.

S & F in repairs kitchen or laboratory sinks made of 1 mm thick stainless steel plugs and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repairs 10 ltrs capacity PVC low level dual flush cistern complete with syphon handle lever, PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed.

S&F in repairs 100 mm bore cast iron sand cast soil waste or vent pipes in any length with or without ears with cement joints laid in trenches, floors or fixed to walls including making good to match with existing surface complete all as specified and directed. (upto 12th storey Height)

S&F in repair 100 mm bore dia cast iron branch pieces( tee,bend,cross & 'Y' shapes) & oval access doors ,with cement joint, fixed on walls complete all as specified and directed.

S&F in repairs 15 mm dia stop valves (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern,of size 580 mm x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to disturbed surfaces complete all as specified and as directed .

S&F in repair vitreous china wash down water closet pedestal pan white excluding flushing cistern and flush pipes complete all as specified and directed .

S&F in repair 15 mm dia bib taps ,cast copper alloy ,fancy type long shank ,chromium plated with capstan ,head screwed down ,high pressure ,screwed for iron pipe complete all as spd and directed.

S&F in repairs 15mm bore angle valves, cast copper alloy fancy type chromium plated with flange of complete all as specified and directed.

S&F in repair chromium plated shower rose fancy type of 125 mm size type fixed to 15mm bore pipe complete all as specified and directed.

S & F60 mm long PVC connection 15mm dia with PTMT nuts complete all as specified and directed.

S & F in repair 600 mm long aluminium anodised tubular towel rail 20mm dia 'D' type between flanges complete all as specified and directed .

S&F in repair 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shankes and fly nuts screwed for iron pipes, complete all as specified and directed.

S&F in repair 15mm bore stop valves cast copper alloy fancy type chromium plated screwed down high pressure with captain head screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair 32 mm waste coupling of PTMT half or full threaded (min wt 45 gm) complete all all as specified and directed .

S&F in repairs CP waste coupling for steel sink complete all as specified and directed .

S&F in repairs PVC waste pipe of size 32/40 mm dia, 800 mm long, complete all as specified and directed.

S&F in repair 125mm/ 150mm dia PTMT grating with or without waste hole fixed on floor trap / nahni trap with white cement complete all as specified and directed

S&F in repair vitreous china wash hand basin white round back of size 550mm x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls/ceiling , pillars & cornices including brooming down and cleaning the surfaces & applying one coat of white wash complete all as specified and directed.

M & L for 40 mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in floors finished even & smooth without using extra cement complete all as specified and directed

Demolition of plain cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) including disposal of old materials out of MD land complete all as specified and directed.

Taking down and refixing vitreous china wash hand basin/Flushing cistern/sink including suitable brackets for fittings but excluding taps , waste chain and plug complete all as specified and directed. Note-For all items (a) All item shall executed/covered upto 12 storey height of AGV area.(c) All T&P, mask sanitiser, safety equipments and other items required at site under subject contract shall be provided by Contractor. Cost of temporary supports such as Props, Jacks, Scaffolding, Shuttering etc as required for each individual case component wise is deemed to be included in unit rates quoted.(c) Adequate safety arrangement need to be ensured to avoid accidents/mishap & cost of same is deemed to be included in unit rates quoted.

SHASHI CONTRACTORS

shanti trading company

smc system & services

M/S KUSHWAHA BROTHERS