REPAIR/MAINTENANCE/REPLACEMENT OF EXTERNAL WATER SUPPLY INSTALLAIONS, CERTAIN PARTS OF COOLING APPLIANCES, VOLTAGE STABILIZER, CERTAIN PARTS OF FIRE FIGHTING SYSTEMS, ROUTINE MAINTENANCE OF SWIMMING POOL INCLUDING SUPPLY OF ESSENTIAL CHEMICAL...

Amount

EXTERNAL WATER SUPPLY MAINTENANCE WORKS

Excavating in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of under ground cables, pipes/pipe lines, etc. and the like not exc. 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type soil complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.50 Metre above the starting point complete all as specified and as directed.

Supply and lay of CPVC pipes, Schedule SDR-11 & plain CPVC SDR 11 fittings for Hot / cold water for sizes (outer dia) mentioned below including all fittings with ISI mark and fixed with solvents as per manufacturers recommendations fixed on wall/ floor or laying in trenches with all fititings and accessories in repairs including testing and taking down existing pipes etc., complete all as specified and as directed. Note: The unit rate quoted shall be deemed to include cost of necessary fittings like elbow, tee, MTA, FTA etc.

CPVC pipes 25mm outer dia

CPVC pipes 32mm outer dia

CPVC pipes 40mm outer dia

CPVC pipes 50mm outer dia

Supply and lay of CPVC pipes 62.5mm Inner dia with CPVC Schedule 40 pipes & Plain Schedule 80 fittings including all fittings with ISI mark and fixed with solvents as per manufacturers recommendations fixed on wall/ floor or laying in trenches with all fititings and accessories in repairs including testing and taking down existing pipes etc., complete all as specified and as directed.

Supply and lay of CPVC pipes 75mm Inner dia with CPVC Schedule 40 pipes & Plain Schedule 80 fittings including all fittings with ISI mark and fixed with solvents as per manufacturers recommendations fixed on wall/ floor or laying in trenches with all fititings and accessories in repairs including testing and taking down existing pipes etc., complete all as specified and as directed.

Material and Labour for 3-layer PP-R Polypropylene random copolymer) pipes for sizes (outer dia) mentioned below SDR 7.4 & PN 16, outer UV stablized and inner antimicrobial, ISI Marked, conforming to IS-1580, fusion welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropylene random fittings and accessories laid in trenches etc., complete all as specified and as directed .

3-layer PP-R Polypropylene random copolymer pipes 32mm outer dia

3-layer PP-R Polypropylene random copolymer pipes 50mm outer dia

3-layer PP-R Polypropylene random copolymer pipes 63mm outer dia

3-layer PP-R Polypropylene random copolymer pipes 90mm outer dia

3-layer PP-R Polypropylene random copolymer pipes 110mm outer dia

Supply and fix in repairs PP-R Ball valves (brass insert) suitable for 32mm outer dia of PP-R pipes complete all as specified and as directed.

Supply and fix in repairs PP-R Ball valves (brass insert) suitable for 50mm outer dia of PP-R pipes complete all as specified and as directed.

Supply and fix in repairs PP-R Gate valves (brass insert) of size suitable for 63mm outer dia of PP-R pipes complete all as specified and as directed.

Supply and fix in repairs CPVC Brass Elbow for fixing with 50mm outer dia CPVC pipes complete all as specified and as directed.

Supply and fix in repairs CPVC Brass Tee for fixing with 50mm outer dia CPVC pipes complete all as specified and as directed.

Supply and fix in repairs CPVC Male Brass Threaded Adaptor (MTA/ MBTA) for fixing with 50mm outer dia CPVC pipes complete all as specified and as directed.

Supply and fix in repairs CPVC Female Brass Threaded Adaptor (FTA/ FBTA) for fixing with 50mm outer dia CPVC pipes complete all as specified and as directed.

Supply and fix in repairs CPVC UNION of size for fixing with 50mm outer dia CPVC pipes complete all as specified and as directed.

Supply and fix in repairs CPVC Flange for fixing with 50mm outer dia CPVC pipes complete all as specified and as directed.

Note for Items No.11.00 to 16.00: - CPVC fittings provided along with pipes for Sl. Items No.4.00 & 4.04 shall not be measured against items No.11.00 to 17.00

Supply and fix in repair/ replacement 25mm dia bore forged brass ball valve (Screwed) with necessary fixing arrangements all as per Art No.1008 B of Zoloto or equivalent of other specified makes including removing old one all as specified and as directed.

Supply and fix in repair/ replacement 40mm dia bore forged brass ball valve (Screwed) with necessary fixing arrangements all as per Art No.1008 B of Zoloto or equivalent of other specified makes including removing old one all as specified and as directed.

Supply and fix in repair/ replacement 50mm dia bore forged brass ball valve (Screwed) with necessary fixing arrangements all as per Art No.1008 B of Zoloto or equivalent of other specified makes including removing old one all as specified and as directed.

Supply and fix in repair/ replacement 80mm dia bore forged brass ball valve (Screwed) with necessary fixing arrangements all as per Art No.1008 B of Zoloto or equivalent of other specified makes including removing old one all as specified and as directed.

Supply, install, connecting and testing Cast Iron Sluice valve, non-rising type, cast iron body, class PN-1.6 with both side flanged ends drilled suitable for bore of pipe 80 mm, ISI marked conforming to IS-14846 of 2000, having stainless steel spindle, bronze gate and seatings with iron wheel at top including suitable rubber gasket joints, complete with suitable nuts, bolts, washers, etc. complete all as specified and as directed.

Supply, install, connecting and testing Cast Iron Sluice valve, non-rising type, cast iron body, class PN-1.6 with both side flanged ends drilled suitable for bore of pipe 100 mm, ISI marked conforming to IS-14846 of 2000, having stainless steel spindle, bronze gate and seatings with iron wheel at top including suitable rubber gasket joints, complete with suitable nuts, bolts, washers, etc. complete all as specified and as directed.

Material and labour for Disconnecting and removing the existing monoblock pumpset of capacity 5HP, any make from the installed position by putting dummy plate to suction and delivery shifting to civil work shop for carrying out repair / overhauling including removing the burnt out windings and rewinding the same with suitable super enameled copper conductor, varnishing., removing, replacing the worn out bushes/ bearing and re-assembling the pumpset, reconditioning, painting the pumpset and bringing back after repair, refixing, testing, commissioning etc., complete all as specified and directed.

Material and labour for Disconnecting and removing the existing monoblock pumpset of capacity 3HP, any make from the installed position by putting dummy plate to suction and delivery shifting to civil work shop for carrying out repair / overhauling including removing the burnt out windings and rewinding the same with suitable super enameled copper conductor, varnishing., removing, replacing the worn out bushes/ bearing and re-assembling the pumpset, reconditioning, painting the pumpset and bringing back after repair, refixing, testing, commissioning etc., complete all as specified and directed.

Material and labour for Disconnecting and removing the existing submersible pumpset of capacity upto 7.5HP, any make from the installed position by putting dummy plate to suction and delivery shifting to civil work shop for carrying out repair / overhauling including removing the burnt out windings and rewinding the same with suitable super enameled copper conductor, varnishing., removing, replacing the worn out bushes/ bearing and re-assembling the pumpset, reconditioning, painting the pumpset and bringing back after repair, refixing, testing, commissioning etc., complete all as specified and directed.

Material and labour for Dismantling inlet and outlet pipe, Electrical connection, taking out complete chlorination pump from the chlorination tank of any size, shifting to civil work shop for carrying out repair / overhauling, including cleaning and replacement of worn-out spares and bringing back after repair, refixing, testing, commissioning etc., complete all as specified and directed.

Supply and Fix in repair/ replacement Brass Foot valve 100 mm inlcuding removing old one complete all as specified and directed.

Supply and Fix in repair/ replacement Brass Foot valve 80 mm inlcuding removing old one complete all as specified and directed.

Supply and Fix in repair/ replacement Brass Foot valve 50 mm inlcuding removing old one complete all as specified and directed.

Supply and fix DOL starter 3 phase 440 volts with relay range upto 16 amps suitable for 5/7.5HP pumpset including taking down the existing unserviceable one complete all as specified and directed.

Supply and fix DOL starter 3 phase 440 volts with relay range upto 16 amps suitable for 15HP pumpset including taking down the existing unserviceable one complete all as specified and directed.

Material and labour for periodical servicing of RO plant of capacity 25 litres by removing the filters and cleaning, refixing to ensure proper flow of treated water complete and replacing spares and filters any type if required complete all as specifed and as directed. Note : (i) Spares will be measured and paid seperately as supply only. (ii) Each plant to be serviced every six month interval period.

Material and labour for periodical servicing of RO plant of capacity 50 litres by removing the filters and cleaning, refixing to ensure proper flow of treated water complete and replacing spares and filters any type if required complete all as specifed and as directed. Note : (i) Spares will be measured and paid seperately as supply only. (ii) Each plant to be serviced every six month interval period.

Supply only in repair/ replacement Sediment filter suitable for RO plant of capacity 25 litres.

Supply only in repair/ replacement Activated carbon filter for RO plant of capacity 25 litres.

Supply only in repair/ replacement RO membrane min 80GPD for RO plant of capacity 25 litres.

Supply only in repair/ replacement Post carbon filter suitable for RO plant of capacity 25 litres.

Supply only in repair/ replacement Sediment filter suitable for RO plant of capacity 50 litres.

Supply only in repair/ replacement Activated carbon filter suitable for RO plant of capacity 50 litres.

Supply only in repair/ replacement RO membrane min 100GPD suitable for RO plant of capacity 50 litres.

Supply only in repair/ replacement Post carbon filter suitable for RO plant of capacity 50 litres.

Supply and fix in repair/ replacement Booster pump min flow rate 1.5LPM,140 PSI out DC 24/48V operation complete incl taking down u/s pump from RO plant complete all as specified and as directed.

Supply and fix in repair/ replacement of 48V adapter for RO plant of any capacity complete all as specified and directed

Supply and fix in repair/ replacement of 48V solenoid valve for RO plant of any capacity complete all as specified and directed

Supply and fix in repair/ replacement of membrane housing for RO plant of any capacity complete all as specified and directed

Supply and fix in repair/ replacement Filter housing (10 inch) for RO plant of any capacity complete all as specified and directed

Supply and fix in repair/ replacement Filter housing (20 inch) for RO plant of any capacity complete all as specified and directed

Material and labour for preparation old painted surface of pump motor coping guard MS common case farein and painting with two coats synthetic enamel paint of approved of quality and shade as specified below for any capacity Motor and pump - Smoke grey colour Coupling gaurd and grill post - Office red colour

Supply and fix in repair/ replacement of pressure gauge cum discharge meter for pump of any capacity all as specified and as directed.

Supply and fixing in repairs/replacement of old water level indicator scale all as specified and as directed.

Supply and fixing in repairs of old water level indicator scale in Overhead tank all as specified and as directed.

Taking of water sample from CGRA to TWAD water testing lab Tuticorin and payment of testing fees and submitting the report to AGE B/R Tuticorin. The Quoted rate includes the transportation cost.

Supply and fix Galvanised Iron (GI) water tubing heavy class/ grade 50mm bore conforming to IS specifications and ISI marked with screwed socket joint together with all fittings such as bends, tees, unions, elbows, connecting pieces, backnuts, caps plugs, couplings, sockets etc., laid in trenches/ open/ fixed on walls including testing after laying complete all as specified and as directed.

Supply and fix Galvanised Iron (GI) water tubing heavy class/ grade 80mm bore conforming to IS specifications and ISI marked with screwed socket joint together with all fittings such as bends, tees, unions, elbows, connecting pieces, backnuts, caps plugs, couplings, sockets etc., laid in trenches/ open/ fixed on walls including testing after laying complete all as specified and as directed.

Supply and fix Galvanised Iron (GI) water tubing heavy class/ grade 100mm bore conforming to IS specifications and ISI marked with screwed socket joint together with all fittings such as bends, tees, unions, elbows, connecting pieces, backnuts, caps plugs, couplings, sockets etc., laid in trenches/ open/ fixed on walls including testing after laying complete all as specified and as directed.

Supply and fix in repairs/ replacement of CI Analog mechanical water flow meter 100mm dia along with cutting the existing flanges and welding the new flanges to the existing pipeline and refixing the water meter in position with all connected accessories complete all as specified and directed.

Supply and fix in repairs Cast Iron specials and fittings such as bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc) tee pieces, single branch. "Y junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs conforming to IS 13382:2004 suitable for CI pipes of flanged/socket ends of sizes up to 150 mm bore complete all as specified and directed.

Supply & Fix in repairs CI fittings like Connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth upto 150m bore complete all as specified and directed.

Material and labour for Lead wool joint for cast iron pipe (spigot and socket pipes) and fittings of 100mm bore and testing after completion all as specified and directed .

Supply and lay Cast Iron pipes with flanged ends, centrifugally cast, class B, ISI maked in any length laid in trenches or on supports including making alteration in existing /new pipe line for insertion of new pipe if necessary of size 50mm bore complete all as specified and as directed by the Engineer-in-Charge :- Note :- Accessories and lead joints shall be measured and paid seperately.

Supply and lay Cast Iron pipes with flanged ends, centrifugally cast, class B, ISI maked in any length laid in trenches or on supports including making alteration in existing /new pipe line for insertion of new pipe if necessary of size 80mm bore complete all as specified and as directed by the Engineer-in-Charge :- Note :- Accessories and lead joints shall be measured and paid seperately.

Supply and lay Cast Iron pipes with flanged ends, centrifugally cast, class B, ISI maked in any length laid in trenches or on supports including making alteration in existing /new pipe line for insertion of new pipe if necessary of size 100mm bore complete all as specified and as directed by the Engineer-in-Charge :- Note :- Accessories and lead joints shall be measured and paid seperately.

Supply and fix in repairs Cast Iron Bends, Tapers, Tee pieces (single & double branch) any type and angle/radius and straight connecting pieces suitable for CI pipes and fitting of flanged ends of sizes up to 100 mm bore complete all as specified and directed.

ROUTINE MAINTENANCE OF SWIMMING POOL

Material and labour for Cleaning the internal surface and drain channels of Swimming pool of 8,00,000 Ltrs capacity by scrapping/brushing and removing all silt, dust, algae etc., from walls and floor including removing blockage of inlet on daily basis and pumping out of entire water from swimming pool at an interval as directed by Engineer-in-Charge. After blocking the all inlets with dry cloth or other suitable arrangement and taking out all accumulated silt/spills etc., from floor and walls of swimming pool completely and depositing at location directed by Engineer-in-Charge, scrubbing and removing the scaling deposit from the inner surface of the pool and washing properly with bleaching powder or with suitable chemicals on inner side and floor surfaces, applying joint filler material in tile joints in vertical and floor surface as per the requirements including writing of date of cleaning with white paint on block painted surface at one place of swimming pool and applying chemicals for treatment of water to keep the swimming pool water free from fungus and bacteria complete all as specified and as directed.

Material and labour for Cleaning the internal surface and drain channels of Diving pool of 1,25,000 Ltrs capacity by scrapping / brushing and removing all silt, dust, algae etc., from walls and floor including removing blockage of inlet on daily basis and pumping out of entire water from diving pool at an interval as directed by Engineer-in-Charge. After blocking the all inlets with dry cloth or other suitable arrangement and taking out all accumulated silt/spills etc., from floor and walls of diving pool completely and depositing at location directed by Engineer-in-Charge, scrubbing and removing the scaling deposit from the inner surface of the pool and washing properly with bleaching powder or with suitable chemicals on inner side and floor surfaces, applying joint filler material in tile joints in vertical and floor surface as per the requirements including writing of date of cleaning with white paint on block painted surface at one place of diving pool and applying chemicals for treatment of water to keep the diving pool water free from fungus and bacteria complete all as specified and as directed.

Note for items No.64.00 & 65.00 : (i) All necessary T & P, materials and labour will be arranged by the contractor. (ii) The quoted rate shall include the cost of Chemical / bleaching powder detergent etc., for cleaning. (iii) Protective measure and insurance of labour working in swimming pool/diving pool shall be deemed to include for the same. (iv) The quoted rate deemed to include the cost of writing “TANK CLEANED On ___” with synthetic enamel paint at one place of swimming pool. (v) Chemicals for treatment of swimming pool/diving pool water shall be measured and paid separately by the supply only items.

Supply only Chlorine in the form of TCCA-90 (Trichloroisocyanuric Acid) granular (1st quality) used as a disinfecting agent in swimming pools in achieving sparkling clean and clear water. Purity of 99% to provides long-term effects throughout the month in keeping swimming pools free from bacteria and algae, With no side-effects on skin, hair and eye etc. complete all as specified and as direccted. Make/Manufacturer: Keshav Hichem Pvt Ltd / Gem Chemicals / Triveni Chemicals

Supply only Alum crystal (1st quality) for "flocculant" agent which attracts dirt particles, phosphates, pathogens, and other undesirable contaminants, causing them to clump together to easily vacuum them out of pool.

Supply only Alum gel (1st quality) for "flocculent" agent which attracts dirt particles, phosphates, pathogens, and other undesirable contaminants, causing them to clump together to easily vacuum them out of pool.

Supply only copper sulphate (1st quality)

Supply only sodium carbonate - Soda Ash (1st quality) to raise the pH of pool water as per the site and water requirement.

Supply only chlorine test solution of 20ml each

Supply only pH test solution of 20ml each

Material and labour for Repair and servicing of exsiting suction sweeper stainless steel of size 1.1m x 0.25m by changing all wheels, wooden brush, wipers in all sides along with 30 meter nylon rope (18mm dia) and all other connected damaged accessories etc., all are fitted with neccesary bolt, nails and screws as required all as specified and directed by Engineer-in-Charge.

Supply only portable PH and Chlorine test meter for water quality monitoring.

FIRE FIGHTING SYSTEM MAINTENANCE WORKS

Supply, install, testing and commissioning of manual call point including taking down existing one complete all as specified and as directed.

Supply, install, testing and commissioning of 12V 7Ah battery for Manual Fire alarm control panel including taking down existing battery complete all as specified and as directed.

Supply, install, testing and commissioning of Manual Fire alarm control panel including taking down the existing one complete all as specified and as directed.

Supply and fix Fire Alarm sounders / hooters, ABS body, 24V DC, for atleast 50 minutes with sound level 65 db to 120 db measured at 1.5 Mtr with sound output variation of + 5 DB, 500 mts range including taking down the existing one complete all as specified and as directed.

Supply, fix and testing first aid hose reel drum with MS construction and spray painted in post office red conforming to IS 884 with 20 mm dia and 30 metre length water hose thermoplastic confirming to IS-5132 mounted suitably to swing upto 180 degrees etc., including taking down the existing one complete all as specified and as directed.

Supply and fix in repairs red plastic jet/ spray hose reel nozzle suitable for instaneous connection to interconnect house pipe coupling as required etc., including taking down the existing one complete all as specified and as directed

Supply and fix in repairs Ball brass valves of size 20mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Taking down existing oscilationg First aid hose reel drum, swinging type from wall and fixing the same with all necessary wall bracket nuts and bolts etc., complete all as specified and as directed.

Material and labour for Cutting of broken fire fighting hose reel and fixing back with new hose, clamps and connectors without any leak complete all as specified and directed.

Material and labour for Refilling of CO2 based Fire extinguisher of 3 to 4.5 kgs capacity by a licensed and certified professional complete all as specified and directed.

Material and labour for Refilling of ABC Dry Powder based Fire extinguisher of 4 to 6 kgs capacity by a licensed and certified professional complete all as specified and directed.

Material and labour for Refilling of ABC Dry Powder based Fire extinguisher of 2 kgs capacity by a licensed and certified professional complete all as specified and directed.

Pressure testing of CO2 based Fire extinguisher of any capacity including discharge and accessory hoses to ensure that no hidden weaknesses etc., complete all as specified and as directed.

Pressure testing of ABC Dry Powder based Fire extinguisher of any capacity complete all as specified and as directed.

Supply and fix in repair hose tube for Fire extinguisher of any type and capacity all as specified and as directed.

Material and labour for Painting and stickering of Fire extinguisher of any type and capacity complete all as specified and as directed.

Supply and fix in repairs pressure gauge (0-14 kg/sqcm) all as specified and as directed.

Supply and fix in repairs pressure switch (0-15 kg/sqcm) all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint of approved colour and shade including prepartion of old treated surfaces of steel complete as specified and as directed. Note: Painting to Fire extinguisher shall not be measured against this item.

Supply and fix in repair Fire fighting hose box door of area not exceeding 0.5 Sqm each including painting with two coats synthetical enamel paint over a coat of primer complete all as specified and as directed.

Supply and fix in repairs of Fire hydrant male and female coupling to avoid any leak complete all as specified and as directed.

Material and labour for Disconnecting and removing the existing monoblock pumpset of capacity 15HP, any make from the installed position by putting dummy plate to suction and delivery shifting to civil work shop for carrying out repair / overhauling including removing the burnt out windings and rewinding the same with suitable super enameled copper conductor, varnishing., removing, replacing the worn out bushes/ bearing and re-assembling the pumpset, reconditioning, painting the pumpset and bringing back after repair, refixing, testing, commissioning etc., complete all as specified and directed.

Supply and fix in repairs Ball brass valves of size 25mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Supply and fix in repairs 'C' class heavy duty MS pipe of 100 mm bore conforming to IS 3589 and 1239 with all fittings such as elbows, tees, flanges, tapers, bends etc., jointing with nut and bolt, gaskets and welding etc., fixing the pipe on the wall/ ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint over a coat of red oxide primer and testing after laying/ fixing etc., complete all as specified and as directed.

Supply and fix in repairs 'C' class heavy duty MS pipe of 80 mm bore conforming to IS 3589 and 1239 with all fittings such as elbows, tees, flanges, tapers, bends etc., jointing with nut and bolt, gaskets and welding etc., fixing the pipe on the wall/ ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint over a coat of red oxide primer and testing after laying/ fixing etc., complete all as specified and as directed.

Supply and fix in repairs Cast Iron dual plate wafer type Non return valve (Reflux valve) of size 100mm bore with all accessories confirming to IS 5312-2004 and ISI marked, type PN 1.6, Cast Iron body including 1.5mm thick compressed asbestos gasket with suitable bolts, nuts and washers etc., jointing and testing complete all as specified and as directed.

Supply and fix in repairs/ replacement Cast Iron butterfly valves of size 100mm bore, type PN 1.6 including 1.5mm thick compressed asbestos gasket with suitable bolts, nuts and washers etc., jointing and testing complete all as specified and as directed.

Supply and fix in repairs/ replacement of brass ball valve of size 80 mm dia (full bore type) with plastic coated lever and screwed female ends tested to 20 Kg/ cm2 as required fxing and testing complete all as specified and as directed.

Supply and fix in repairs/ replacement of blank flanges with asbestos gasket, nut, bolts, washers complete etc of size 100 mm dia and welding to the existing pipeline complete all as specified and directed.

Cutting upto a depth of 2.5cm into concrete walls and trimming surface where reinforcement is cut through as required, girth exc. 30cm complete all as specified and as directed.

Material and labour for Cement concrete M-20, (1:1.5:3), type A1 using 20mm graded stone aggregate as in repairs to disturbed concrtete walls complete all as specified and as directed.

Supply and fix in repairs of Repeater Fire alarm control panel with all accessories complete all as specified and directed by the Engineer-in-Charge.

Material and labour for painting with synthetic enamel paint one coat of approved colur and shade including preparation of old detoriated surfaces of pipes not exc 10cm width or grith complete as specified and directed by Engineer-in-charge.

FIRE FIGHTING SYSTEM MAINTENANCE WORKS

Taking out the existing unserviceable compressor unit from 1.5 Ton capacity Split type AC and Supply & Fix new hermetically sealed Rotary / Piston type compressor unit suitable for split type AC of capacity 1.5 Ton including pumping out oil, cleaning the refrigeration system with CO2 and charging refrigerant gas (R-22/R-407C/R-410A) providing NRV for further topping up of gas and re fixing in position, testing and commisioning etc., complete all as directed. Note : Freon Gas for charging shall be measured and paid separately.

Taking out the existing unserviceable compressor unit from 2 Ton capacity Split type AC and Supply & Fix new hermetically sealed Rotary / Piston type compressor unit suitable for split type AC of capacity 2 Ton including pumping out oil, cleaning the refrigeration system with CO2 and charging refrigerant gas (R-22/R-407C/R-410A) providing NRV for further topping up of gas and re fixing in position, testing and commisioning etc., complete all as directed. Note : Freon Gas for charging shall be measured and paid separately.

Taking out the existing unserviceable compressor unit from Water cooler 60/120 capacity and Supply & Fix new hermetically sealed Rotary / Piston type compressor unit suitable for water cooler of capacity 60/120 litre including pumping out oil, cleaning the refrigeration system with CO2 and charging refrigerant gas (R-22/R-407C/R-410A) providing NRV for further topping up of gas and re fixing in position, testing and commisioning etc., complete all as directed. Note : Freon Gas for charging shall be measured and paid separately.

Taking out the existing unserviceable compressor unit from Water cooler 40/80 capacity and Supply & Fix new hermetically sealed Rotary / Piston type compressor unit suitable for water cooler of capacity 40/80 litre including pumping out oil, cleaning the refrigeration system with CO2 and charging refrigerant gas (R-22/R-407C/R-410A) providing NRV for further topping up of gas and re fixing in position, testing and commisioning etc., complete all as directed. Note : Freon Gas for charging shall be measured and paid separately.

Supply and Fix in repair starting capacitor of 55 MFD suitable for 1.5 /2.0 Ton AC complete all as specified and as directed.

Supply and Fix in repair starting capacitor of 4 MFD suitable for 1.5 /2.0 Ton AC complete all as specified and as directed.

Supply and Fix in repair/replace air filter same as existing in Indoor unit suitable for 1.5 Ton AC complete all as specified and as directed.

M&L for charging refrigerant gas (R-22/ R-407C / R-410A / R-717/ R-600A/ R744 or other suitable gas) upto maximum capacity for split AC 1.5/2.0 Ton capacity complete all as specified and as directed.

M&L for charging refrigerant gas (R-22/ R-407C / R-410A / R-717/ R-600A/ R744 or other suitable gas) upto maximum capacity for water cooler of 40/80 or 60/120 ltrs capacity complete all as specified and as directed.

Supplly and fix copper pipe of size 5/8 inch dia for any capacity of split AC including taking down unserviceable copper pipe of size 5/8 inch dia complete all as specified and as directed.

Supplly and fix copper pipe of size 1/4 inch dia for Split AC 1.5 Ton capacity including taking down unserviceable copper pipe of size 1/4 inch dia complete all as specified and as directed.

Supplly and fix copper pipe of size 1/2 inch dia for discharge line of Split AC 1.5 Ton capacity including taking down unserviceable copper pipe of size 1/2 inch dia complete all as specified and as directed.

Supply and fix white insulation tape over suction & discharge line of any size for any capacity Split AC from indoor to outdoor for each AC set complete all as specified and directed

Supply and fix thermal insulation material black rubber sleeve over suction & discharge line of any size for any capacity Split AC from indoor to outdoor for each AC set complete all as specified and directed

Material and Labour for cleaning, washing with detergent soap solution and servicing, greasing all movale parts of cooling and condensing unit such as cooling coil of blower dip tray, blower motor and condensor compressor etc., and testing complete for Split type Air conditioner of 1.5/2.0 Ton capacity complete all as specified and as directed.

Material and Labour for cleaning of tank, washing with detergent soap solution and servicing, greasing all movale parts of cooling and condensing unit such as cooling coil of blower dip tray, blower motor and condensor compressor etc and testing complete for Water cooler of any capacity complete all as specified and as directed.

Supply and fix in repair/replacement of the PVC drain pipe, flexible, 20mm dia bore complete all as specified and as directed.

Supply and fix in repair/replacement of condensor fan motor unit for Split AC 1.5 Ton Capacity complete all as specified and as directed.

Supply and fix in repair/replacement of new AC remote controller suitable for Split AC of any model of make LG/ Blue Star/ Voltas/ Hitachi/ Carrier/ Samsung as per site requirement and as per directed by the Engineer-in-Charge

M&L for repairing servicing/replace of electronic board of voltage stabilizer 4 KVA capacity complete all as specifed and as directed.

M&L for repairing servicing/replace of electronic board of voltage stabilizer 5 KVA capacity complete all as specifed and as directed.

Supply and fix in repairs with new anti rust powder coated outdoor unit brackets set (stand) suitable for split AC 1.5 Ton capacity including taking down outdoor unit after switching of the circulation gas and removing old brackets and replacing them with new and fixed with new nuts and bolts, refixing the outdoor unit on the new bracketsetc., complete all as specified and as directed.

M&L for painting with two coats of synthetic enamel paint of approved shade /tint including prepartion old steel surfaces and writing the details of MES No. on Split AC outdoor unit complete all as specified and as directed.

M&L for disconnecting copper suction / discharge line, tranposting the indoor unit workshop, dismantling the unit complete water servicng the evaporator unit, roller unit and assembling the unit refixing and connecting the copper pipe from outdoor unit testing complete all as specifed and as directed.

M&L for transporting of water cooler of any capacity to work shop and carry out body tinkering work replacing deteriorated Mild steel bottom/side poriton as existing size and painting with two coats of sythetic enamel paint of approved tint over a coat of red oxide primer including writing SM/MES number etc., complete all as specified and as directed.

Material and Labour for dismantling and disconnecting carefully the existing Split AC /Window AC of any capacity after disconnecting the copper pipe and electrical connection, disconnecting the indoor and outdoor units complete, Shifting to and install at new location by fixing the indoor and outdoor units and making electric and copper pipe connection including top up refrigerant gas testing and commisioning etc., complete all as specified and as directed. Note : The unit rat quoted is deemed to include the cost of Refrigerant gas for top up.

Material and labour for submain wiring complete with two runs of 4.00 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new PVC casing and caping of suitable size with accessories fixed on surfaces of wall / floor and fixed on ceiling/roof etc, with one run of 4.00 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring with conduit any type complete all as specified and as directed. Note: Three runs of 4.00 Sqmm multistranded cable one run of PVC casing and caping shall be considered as one unit length.

Supply and Fix in replacement of PVC insulated sheated 3-core copper cable 2.5 Sqmm size complete all as specified and as directed.

Supply and fix in repair / replacement of electronic PCB board from Indoor unit of Split AC of any capacity complete all as specifed and as directed.

Supply and fix in repair roller motor unit from Indoor unit of Split AC of any capacity complete all as specifed and as directed.

Supply and fix in repair copper coil for split AC 1.50 /2.00 Ton capacity complete all as specifed and as directed.

Supply and fix in replace of fan blade of suitable size for 1.5/2.0 ton capacity of split type AC complete all as specified and directed

Material and labour for taking down unserviceable items and supply and fix new items of the following for refrigerators of capacity 250 Litres including testing and commissioning etc., complete all as specified and as directed by the Engineer-in-Charge:-

Relay unit

Thermostat assembly

Running Capacitor 10 MFD

Material and labour for taking down unserviceable items and supply and fix new items of the following for deep freezer of capacity 200 Litres including testing and commissioning etc., complete all as specified and as directed by the Engineer-in-Charge:-

Relay unit

Thermostat assembly

SHRI AKSHAYA TRADERS (BID ID -3279380)

Banyan Engineers and Contractors (BID ID -3279422)