GE/SRA/T-34/2025-26

Amount

Dismantling of ceiling grid frame, any type along with ceiling board of any thickness including cover fillets, keeping aside for re-use or removal from site complete all as specified and directed.

Dismantling of wall boards, any type as in lining, panelling etc, of any gauge or any thickness including cover fillets complete all as specified and directed.

S&F false ceiling with powder coated exposed G.I. grid suspension system consisting of Main Runner 3600 mm long, Cross Tee 1200mm/600mm long and Wall Angle, wall angle fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c, Main Runners placed @ 1200mm, Cross Tee 1200mm inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm and additional cross tees of 600 mm placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm, grid of module size 600mm x 600mm shall be supported by 6 mm dia G.I. wire from purlins/soffit complete all as specified and directed. Note: Ceiling board will measured and paid separately under appropriate item.

All as per item No. 03 above, but except material (Serviceable GI snap grid obtained from item No. 01 here in before) complete all as secured and as directed. Note: Ceiling board shall be measured separately under appropriate item.

S&F 12 mm thick mineral fibre ceiling tiles shall be of dimension 595x595mm with humidity resistance 99% Thermal conductivity K = 0.052-0.057 w/mK colour white, fire performance UK Class 0/Class 1 (BS 476 pt-6&7) suitable for green building application (GRIHA Criteria 17 & 29 SWAGRIHA 12) with recycled content not less than 30 % and light reflectance not less than 85%. NRC of 0.55 to 0.6 duly fixed on GI Snap Grid Frame Work with Steel Screws complete all as specified and directed. Note: Snap grid ceiling frame shall be measured separately under appropriate item.

All as per item No. 05 above, but except material (Serviceable boards obtained from item No. 01 here in before) complete all as specified and as directed. Note: Snap grid ceiling frame shall be measured separately under appropriate item.

S&F 6mm thick HPSC cement fibre plain building boards, fixed to wall, including applying 2 mm thick wall putty in two coats finishing even and smooth and applying two coats of oil bound distmeper complete all as specified and directed.

S&F wall panelling with hollow 5 mm thick PVC panels of 10"/12" width and any height, single side pre-laminated with flat or fancy patterned on laminated side, fixing on walls with screws or with solvent cement as required on site including necessary corner angles, fillets etc as required at site complete all as specified and directed.

M&L for Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water complete all as specified and directed.

M&L for providing Granite (of any type) Slab, 16-18mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including edge moulding, grinding and polishing, laid over and including 20 mm thick screed bed in cement mortar (1:4), laid in any position / location complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deemed to be included in the quoted rate.

Dismantling Floor, Paver Tiles, Hearth or Wall Tiling, etc. including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and directed.

M&L Vitrified Coloured Tiles 9 to 10mm thick (Square/ Rectangular), Double Charged, Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Floors, or in any location as directed by Engr-in-Charge, Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4 complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.

M&L Vitrified Coloured Tiles 9-10mm thick (Square/ Rectangular), Double Charged, Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Floors, etc. Set in Neat Cement Slurry, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, laid with spacers to provide a uniform spacing of 3mm between the tiles complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deemed to be included in the quoted rate. Grouting shall be measured and paid separately.

M&L for grouting joints of ceramic floor tiles, area of each Tile not exc. 0.36 Square Metre in Floors, having 3mm joint width using epoxy grout mix of 0.70 Kg of organic coated filler of desired shade (0.10 Kg of hardener and 0.20 Kg of resin per Kg) including filling/grouting and finishing complete all as specified and directed. (NOTE: This item shall be executed only for Item No 13 here-in-before)

M&L Vitrified Coloured Tiles 9 to 10mm thick (Square/ Rectangular) Double Charge, Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Vertical Surface i.e. Dado, Skirting, etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deemed to be included in the quoted rate.

M&L for providing non-skid/matt finish Ceramic tiles, coloured, 7-8 mm thick (Square / rectangular), area of each tile exc 0.18 Sqm but not exceeding 0.38 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the tiles laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.

M&L for providing non-skid/matt finish Ceramic tiles, coloured, 7-8 mm thick (Square / rectangular), area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the tiles laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.

-ditto- but ceramic tiles of size exc 0.11 Sqm but not exceeding 0.18 Sqm in skirting

M&L for Coloured Glazed Ceramic Tiles in vertical surface 450mm X 350mm X 6-7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the Tiles, laid over and including 10mm thick rendering as Screed or backing coat of wall tile in Cement Mortar 1:3, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.

M&L for Coloured Glazed Ceramic Tiles in vertical surface 400/300mm X 600mm X 6-7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the Tiles, laid over and including 10mm thick rendering as Screed or backing coat of wall tile in Cement Mortar 1:3, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.

M&L for providing outdoor type heavy duty ceramic Floor (Paver) Tiles, 400 x 400 x 10mm thick, having geometric patterns, Anti-skid type, Impact Resistant, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and directed. NOTE: Cost of Cement Screed Bed shall deemed to be included in the quoted rate.

M&L preparing old Distempered surfaces of Walls/cement boards including filling the existing Nails/Screw Holes, etc with putty and making surfaces smooth and applying One Coat of Acrylic Distemper / Oil Bound Distemper (of approved tint) with rollers complete all as specified and directed.

Taking down existing bird proof net of any size complete all as specified and directed.

S&F bird proof netting UV stabilized made of 1mm dia HDPE/Nylon wire having mesh size n.exc 25mmx25mm, tightening/securing the joints by using stainless steel wire of suitable thickness complete all as specified and directed.

M&L for cleaning of existing bird proof net including necessary arrangement at a height 15mtr (Approx) complete all as specified and as direced by Engr-in-charge at site. Note: Cleaning of bird proof net shall be done at least once in a quarter.

M&L for tightening / securing the joints of existing bird proofing with stainless steel wire of suitable thickness to prevent the enrty of birds complete all directed at site by Engr-in-Charge. Note : Joints of net to be measured for payment.

NOTES FOR ITEM NO 23-26 :- 1) The work is required to be executed at a height of approx 18 metres. Contractor's quoted rate shall be deemed to included for cost of all machinery and safety gear required for execution of the work. No claim shall be admissible at a later stage.

S&F in repair Rotational Moulded Polyethene Water Storage Tank, 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS, hoisted and fixed in Position incl providing new GI tank nipple complete all as specified and directed.

S&F in repair Rotational Moulded Polyethene Water Storage Tank, 1000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS, hoisted and fixed in Position incl providig new GI tank nipple complete all as specified and directed.

S&F in repairs Ball Valve 20mm Dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe, complete all as specified and directed.

S&F in repair Brass Chromium Plated Tubular Towel Rail 20mm Dia, 60 Cm long with Brackets complete all as specified and directed. (MAKE: PARRYWARE, CAT NO: T5901A1 / CERA, CAT NO: F5013103CH / JAQUAR, CAT NO: AKP-CHR-35711PS / HNDWARE, CAT NO: F580012CP)

S&F in repair Chromium Plated health faucet with 01 mtr long stainless steel tube including necessary fitting and fixtures complete all as specified and directed. (MAKE: PARRYWARE, CAT NO: T9355A1 / CERA, CAT NO: F8030110AB / JAQUAR, CAT NO: ALD-CHR-579 / HINDWARE, CAT NO: F160013CP)

S&F in repair Vitreous China, white, half stall urinal flat back with grating and union for discharge pipe (excluding flush pipe and flushing cistern and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and Union for discharge pipe complete all as specified and directed. (NOTE: Quoted rate shall be deemed to include for the cost of waste coupling and waste pipe)

S&F in repair brass chromium plated Urinal spreader for fixing with 15 mm dia pipe complete all as specified and directed.

S&F in repair brass chromium plated Push Cock, suitable for urinals, duly fixed with flush pipe complete all as specified and directed.

S&F in repair PVC (SWR) 75 mm floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, laid in floor, trenches etc complete all as specified and directed.

S&F in repairs PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in floors, trenches etc complete all as specified and directed.

S&F in repair PVC (SWR) 75mm bore (dia), Bend any type, jointing with Solvent Cement complete all as specified and directed.

S&F in repair PVC (SWR) 110mm bore (dia), Bend any type, jointing with Solvent Cement complete all as specified and directed.

Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and directed.

-ditto- but for 20 mm bore GI tubing

S&F Chlorinated Polyethylene Chloride (CPVC) pipes 20 mm outside dia, SDR-11, having thermal stability for hot and cold water supply including all SDR-11 CPVC plain and brass threaded fittings (such as Bends, Elbows, Tees, Short Pieces, Connectors, Back - Nuts Caps, Plugs, Unions, Flange (core) & flange (ring), reduction Tee, reducing socket, Male & female threaded socket, tank connector etc) fixed / laying walls, ceilings or in floors etc. with suitable size MS clamp of spacing 1.00 mtr etc pipe line complete all as specified and directed.

-ditto- but with 25 mm outer dia size CPVC pipes

S&F CPVC Ball valve 20mm (outer dia), screwed both Ends for CPVC pipes, complete all as specified and directed.

S&F CPVC Ball valve 25mm (outer dia), screwed both Ends for CPVC pipes, complete all as specified and directed.

S&F in repair PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and Handle, PVC Waste Pipe 32mm bore (dia) of suitable Length, a pair of Cast Iron Bracket/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm provided with 32mm dia Brass Chromium Plated Waste Fitting, PVC waste pipe, brackets incl making good disturbed Surfaces in Cement Mortar 1:3 and filling joints with whte cement complete all as specified and directed. (NOTE: Cost of CP waste coupling and PVC waste pipe is deemed to be included in the quoted rates)

S&F in repair PVC Connection Pipe 15mm size and 60 Cm in length with Adapter Nuts of PVC, complete all as specified and directed.

S&F in repair Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, Long Body with Capstan Head, screwed down, screwed for Iron Pipe or for Brass Ferrule, complete all as specified & directed. (MAKE: PARRYWARE, CAT NO: G5706A1 / CERA, CAT NO: F1020151 / JAQUAR, CAT NO: ARI-CHR-39037)

S&F in repair Chromium plated brass Pillar tap, with aerator, fixed to wash hand basin, complete all as specified and directed. (MAKE: PARRYWARE, CAT NO: T5801A1 / CERA, CAT NO: F2014101 / JAQUAR, CAT NO: FUS-CHR-29021)

S&F in repair 15mm bore chromium plated brass body single lever central hole basin mixer without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed. (MAKE: PARRYWARE, CAT NO: G5714A1 / CERA, CAT NO: F1020451 / JAQUAR, CAT NO: ARI-CHR-39001B)

S&F in repair angle valve, 15 mm bore, cast copper alloy, chromium plated fancy type, with wall flange fixed to iron pipe complete all as specified and directed. (MAKE: PARRYWARE, CAT NO: G5707A1 / CERA, CAT NO: F201420 / JAQUAR, CAT NO: ARI-CHR-39001B / HINDWARE, CAT NO: F360006CP)

S&F in repair Chromium plated brass two way Angle valve, fancy type, with wall flange fixed to 15 mm bore Iron pipe, complete all as specified and directed. (MAKE: PARRYWARE, CAT NO: G5743A1 / CERA, CAT NO: F2014211 / HINDWARE, CAT No: F360055CP)

S&F in repair Stop Cock 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type with long Shank and Cup (Concealed type), screwed down, high pressure, with Crutch or Butter-fly Handle, screwed Both Ends for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and directed. (MAKE: CERA, CAT NO: F1020361 / PARRYWARE, CAT NO: T1311A1 / JAQUAR, CAT NO: ARI-CHR-39083K & ALD-CHR-083R / HNDWARE CAT NO: F650030CP & F850094CP)

S&F in repair faucet connector mixer connection pipe, 600mm long, inner PVC tube protected with high tensile braided stainless steel complete all as specified and directed.

S&F in repairs for waste coupling chromium plated for sink /wash basin, suitable for 32mm dia waste pipe complete all as specified and directed. (NOTE: This item shall only be measured for replacement in existing sinks, basins etc)

S&F in repair PVC Waste Pipe 32mm bore (dia), 60-75 cm length (as required at Site), complete all as specified and directed. (NOTE: This item shall only be measured for replacement in existing sinks, basins etc)

Repair/Servicing of Urinal Sensor, any make or type including replacement of necessary washers, battery etc to ensure proper flow of water complete all as specified and directed. NOTE: In the event of sensor becoming unserviceable after servicing, the contractor shall rectify the defect at his own cost.

S&F in repair Urinal concealed wall mounted sensor including all necessary fixing arrangements and connections complete all as specified and directed . (Make : ESS ESS, Cat No: 202CLMAB / PRAYAG, Cat No: BSU-11 / HINDWARE, CAT NO: F860083CP or equivalent model in JAQUAR / PARRYWARE / CERRA)

S&F in repair Plastic Water Closet Seat and Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device and complete all as specified and directed. NOTE: This item shall be measured for replacement of only seat cover on existing EWC.

S&F in repair Plastic seat & cover, white, soft close type, for water closet (of any description) incl chromium plated hinge complete all as specified and directed. NOTE: This item shall be measured for replacement of only seat cover on existing EWC.

Taking down Shutter of any description, area exc 2.00 Sqm Each and Refixing in the Same Opening, after resecuring or easing and adjusting, etc., complete all as specified and directed.

Taking down Shutter of any description, area exc 1.00 Sqm and not exc. 2.00 Sqm Each and Refixing in the Same Opening, after resecuring or easing and adjusting, etc., complete all as specified and directed.

S&F in repairs Aluminium alloy Handle 150mm long (weight not less than 90 Gram), cast type, anodised, complete all as specified and directed.

S&F in repairs Aluminium Barrel Tower Bolt 200mm long (weight not less than 130 Gram), extruded section, complete all as specified and directed.

Hacking out old broken Glass (any thickness, size, quality or description) from Wooden or Metal Frames, glazed with putty or fixed with beads, at any height including necessary scaffolding, safety gears etc complete all as specified and directed.

S&F Plain Sheet Glass 4.0mm thick, Ordinary quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane, at any height including necessary scaffolding, safety gears etc complete all as specified and directed.

S&F Frosted Sheet Glass 4.0mm thick, Ordinary Type and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane, at any height including necessary scaffolding, safety gears etc complete all as specified and directed.

Repairing of NCL Door, Windows, Ventilators Shutter Fixed/ Side Hang /Sliding Type including replacement of necessary Jointing Cleats, Glazing Clips, Rubber Neoprene Packing, Screws, etc. and repairing of Locking Arrangement if any, complete all as specified and directed. NOTE : Cost of Materials required for smooth functioning of Shutter shall deem to be included in the Quoted Unit Rate.

Dismantling old partition, any materials alongwith glass, boarding, in any position, framed work and removal from site complete all as specified and directed.

M&L for powder coated (medium thickness of powder coating 50 micron) anodised aluminium work for partitions (fixed portions) with extruded built up standard tubular sections/Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of reuired dia and size including necessary filling up the gaps at the junctions i.e. at top, bottom rubber/neoprene gaskets etc, aluminium sections shall be smooth, rust free, straight, mitred and will be jointed mechanically wherever required including cleat angle, alumnium snap beading for glazing/panelling etc; including fixing glass or particle board with brass/stailness screws complete all as specified and directed. (NOTE: Sheet glass and particle board shall be measured and paid seperately as "Supply Only".

Supply only 12 mm thick pre-laminated particle board or Engineered Wood Board, interior grade, laminated both sides, cut to size required complete all as specified and directed.

Supply only Sheet Glass 4.80 mm thick, oridinary quality, cut to size exc 0.50 sqm each pane, edges grounded and made smooth complete all as specified and directed.

S&F in repair Door Closer Aluminium (Die cast) body, hydraulically regulated, Designation No. 3, Universal type, suitable for Door Shutters of 851mm to 1000mm in width and of weight between 61.00 to 80.00 Kilogram complete all as specified and directed.

S&F in repair Double Action Floor Spring Hydraulically Regulated made up of minimum 1.25mm thick Aluminium alloy Sheet Foundation Box, Main Body with Stainless Steel Cover, Governing Pivot made of Brass, Other Parts made of Mild Steel heavy duty complete all as specified and as directed.

S&F in repair platinum polished stainless steel Sliding Door Bolt 250mm long having 16mm solid rod with Hasp Staple (Bolt type) and Fixing Clips of 3mm thick Sheet Cast or Extruded Section and Fixing Bolts and fixing, complete all as specified and directed.

S&F 5 mm thick plain acrylic sheet (any colour), fixed with coach screws and washers in steel frame work complete all as specified and directed.

S&F in repairs circulator/ventilator wind driven turbine, 600 mm size with FRP base of size 32" x 24" to match roof sheet with polyster resin powder coated, top of ventilator turbine made out from aluminium with integrated and reinforced main bearing housing the shaft of stainless steel and varpitch from alumnium, rotation bearing will be twin ZZ ball bearing encased in single integrated bearing housing etc complete all as specified and directed. (MAKE : SVS, Model : Windy 24 Plus or equivalent model in Shrijee / Golden Engineers / Airier) NOTES FOR ITEM NO 79 & 80:- The works are required to be executed at height of approx 20 metres. Contractor's quoted rate shall be deemed to included for cost of all scaffolding, T&P, machinery and safety gear required for execution of the work. No claim shall be admissible during currency of work.

M&L for repairing of unserviceable electric motor of motorized sliding door of Hangars, by removing the motor from existing position, shifting to workshop for the repair work, removing the burnt winding, cleaning rotor, stator, replacing the ball bearings and re-winding the motor with new super enamelled copper wire of size equivalent to the original winding including insulated packing materials, Varnishing, Drying etc and installing back to the original position, testing and commissioning on full load complete all as specified & directed by Engr-in-Charge.

S&F in repairs PVC insulated and sheathed armoured LT cable with 4 core 6 sqmm stranded copper conductor, 1100 volts grade incl necessary terminations and testing complete all as specified directed.

Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Paving, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and directed.

M&L for Cement Concrete 1:4:8 type D2 (40mm Graded Stone Aggregate), 100mm thick, as in Sub-bases of floor, path, hardstanding etc complete all as specified and directed.

M&L for Cement Concrete 1:3:6 type C2 (40mm Graded Stone Aggregate), 75mm thick, as in plinth protection finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for laying pre-polished 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. (NOTE: Sand cushioning shall be measured and paid separately)

M&L for sand cushioning with clean river sand duly clear of residual, organic and deleterious materials spread evenly to uniform thickness over PCC Sub Base complete all as specified and directed.

M&L Providing, cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping finished even and smooth without using extra cement complete all as specified and as directed.

S&F in repair 12mm thick toughened glass, exc 0.50 sqm each pane, as in doors, partition, etc. inclding cutting to shape as required and fixed complete all as specified and as directed by Engineer-in-Charge.

Demolition of Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc. Incl removal of debris from site complete all as specified and directed.

M&L for Brick Work with Sub Class 'B' Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and directed.

M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls/Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L for complete removal of existing treatment on old painted/distermpered surfaces of internal walls by scrapping and removing layers of all wall finishes including cleaning, watering to make the surface clean and free from dust, etc including necessary scaffolding, safety and protective measures complete all as specified and directed.

M&L for preparing New/Undecorated Plastered Surfaces of Walls, applying a coat of suitable cement primer followed by a Coat of 2.0 mm thick Wall Putty (in two layers of 1mm thick) including rubbing down with Sand Paper to obtain a smooth finish surface and finishing with Two Coats of Acrylic/Oil Bound Distemper (as approved) as per desired shade/tint complete all as specified and as directed.

Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and directed.

M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound (as per manufacturer's instructions) on external surfaces of brick/stone walls or concrete surfaces finished even and fair upto 4 storey height including necessary scaffloding complete all as specified and directed. Note : Water Proofing compound shall be measured and paid seperately as "Supply only".

Supply only Liquid Water Proofing Compound, conforming to IS and/or as approved, complete all as specified.

M&L for preparation of newly plastered surfaces and finished with two coats of exterior acrylic emulsion paint (having anti-dust & anti-algae properties) duly mixed with stainer to achieve approved Tint/shade (in camouflage pattern) over a coat of suitable exterior primer, applied to new wall surfaces of any description, over 10cm width or girth not otherwise described, as per manufacturer's instructions, up to 4 storey height incl necessary scaffolding safety gear etc complete all as specified and directed.

S&F in repair vitreous china floor mounted rimless one piece closet (Pedestal pattern), white, including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, Soft close seat cover and connecting fittings complete all as specified and directed. (MAKE : JAQUAR, Cat No: OPS-WHT-15853S300UF / CERA, Model: ESPELLO / PARRYWARE, Model: Omega / HINDWARE, Model: ESTELLA)

S&F in repair vitreous china, white, counter top wash hand basin, including providing 32 mm dia chromium plated waste coupling and making all necessary connections complete all as specified and directed. (Make of Basin : CERA, Model: CAVELLO, HINDWARE, Model: FABIO / PARRYWARE, Model: FLOAT) (NOTE: Cost of Waste coupling shall deemed to be included in the quoted rate.)

S&F in repair CP bottle trap with internal portion 32mm size and of suitable length as per site requirement for connection to counter top basin complete all as specified and directed.

S&F in repairs toilet paper holder, chromium plated, surface type with flap complete all as specified and directed. (MAKE: PARRYWARE, CAT NO: T5914A1 / CERA, CAT NO: F5013110CH / JAQUAR, CAT NO: CPA-CHR-1153 / HINDWARE, CAT NO: F880003CP)

S&F in repair Chromium plated brass Towel ring, square or round, complete all as specified and directed. (MAKE: PARRYWARE, CAT NO: T6904A1 / CERA, CAT NO: F5013115CH / JAQUAR, CAT NO: ACN-CHR-1121N / HINDWARE, CAT NO: F580003CP)

S&F in repair soap dispenser with glass bottle with chromium plated base complete all as specified and directed. (MAKE: PARRYWARE, CAT NO: T6913A1 / CERA, CAT NO: F5015111CH / JAQUAR, CAT NO: ACN-CHR-1135N / RUHE, MODEL: DROP)

S&F in repair stainless steel Grating Round 100mm Dia with waste hole jointing with Solvent Cement complete all as specified and directed.

Demolition Cement Concrete (Reinforced) of slab, facia, Chajja, sunshade, chullah hoods and similar work (reinforcement cut as required to facilitate demolition) and removing debris, etc. to Outside MOD Land, complete all as specified and directed. NOTE : MS reinforcement obtained from demolition shall be measured under Sch of Credit

M&L for RCC 1:2:4 (type B1) using 20mm graded aggregate as counter/platform supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. NOTE : MS reinforcement shall be measured and paid separately.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal or sloping) for rough finished surfaces complete all as specified and directed.

M&L for Mild steel TMT bars 10mm Dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm Dia complete all as specified and directed.

Taking down damaged/unserviceable PVC/WPC Chowkat or Frame exc. 1.50 Sqm but not exc 4.0 Sqm Each with shutter (without taking off shutter from the frame) and removal from site complete all as specified & directed.

S&F Factory made solid PVC door frame (Chowkhat) of size 100 mm x 45mm made out of 5mm thick single side prelam PVC Sheet & edges painted to match with the prelam sheet, frame reinforced with MS square tube of size 40mm x 20mm of 19 gauge throughout the frame, fixed in opening as per specification & drg and as per manufacturer instructions complete all as specified and directed.

M&L for Factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core suppling & fixing in the frame at site with aluminium hinges as per specification and fixing in the Frame complete all as specified & directed. NOTE :- Hinges will be Measured and Paid under appropriate Item.

S&F Butt hinges, 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22 complete all as specified and directed.

S&F Brass Handle 150mm long, decorative type, complete all as specified and directed.

S&F Brass Tower Bolt 150 mm long, complete all as specified and directed.

S&F brass knob set, keyless, with locking provision from inside, for bathroom doors complete all as specified and directed.

S&F Venetian blinds with sliding rail vertical type frame, fabric type, of approved type, colour & quality, fixed in position as in repair complete all as specified and as directed.

S&F in repairs 18-19 mm thick PVC Board Scratch and strain free (weight not less 9 Kg/Sqm) in Kitchen Cabinets (shelves, doors etc), one side laminated , jointed by means of PVC Adhesive Solvent and fixed using Self-tapping Aluminium Screws, including providing & fixing of Stainless steel L shaped hinges suitable for PVC Board (minimum of 02 Nos for Each leaf ) to hold cabinet door, Stainless Steel Silver chrome Door Handle 100mm long (01 No for each leaf of shutter), magnetic catcher, etc complete all as specified and directed. NOTE: Quoted unit Rates are inclusive of PVC board, handles, hinges, screws, magnetic catcher etc.

S&F in repairs coloured rubberized interocking type floor tiles, suitable for gyms, tyre storage, etc non-slippery, shockproof, of size 600mm X 600mm X 15 mm thickness, fixed with suitable adhesive as per manufacturer's instructions complete all as specified and directed.

M/s Satguru Traders (BID ID -3357590)

shiv shanker enterprises (BID ID -3357366)

M/s Har Nandi Construction Company (BID ID -3358560)