SPECIAL REPAIRS TO BOUNDARY WALL AT VISHWA VIHAR CAMP, PROVISION OF RCC DRAIN COVERS AT MAP ACCOMMODATION AT AV CAMP AND ADDN/ALTN TO REGIMENTAL SHOP AT VISHWA VIHAR CAMP OF ASTE UNDER AGE B/R-I OF GE (AF) MARATHAHALLI, BANGALORE

Amount

Demolition of Brick work or Stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings dressed stonework and precast concrete articles all as directed.

Material & Labour for Walling of squared rubble, Bangalore type, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 including dressing face bed complete all as specified.

All as per Item No.2 above but except stones complete all as specified.

Material & Labour for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling uncourses or brought upto courses hammer dressing with maximum deprssion on face from straight edge held against the dressed surface n.exc 20mm all as specified and directed.

Material & Labour keyed pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified.

Material and labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in CM (1:4) finished even and fair without using extra cement etc complete all as specified and as directed by Engr-in-charge.

Material and Labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint any tint over a coat of alkaline resistant primer, Complete all as specified and directed by Engr-in-Charge.

Material and Labour for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in Copings, Cills, bed blocks, filling the pressed steel frames, etc and the like including weathering, slightly rounded or chamfered angles and throating including use of formwork, Complete all as specified and as directed.

Material and Labour Pre-Cast Cement Concrete block masonry with solid blocks, in PCC 1:3:6, type C1, using 20mm graded stone aggregate exc. 10 cm in width and setting in CM (1:6), complete all as specified and as directed by Engr-in-charge.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete etc all as specified and as directed.

Fixing only Framed work such as grills, gratings, etc., with ends of bar shouldered and or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks & similar work conforming to Fe 290 Gde E-165 all as specified.

Material and Labour for Framed work such as grills, gratings, etc., with ends of bar shouldered and or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks & similar work conforming to Fe 290 Gde E-165 all as specified.

Material and Labour for joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e., within 20mm of the length indicated) with Conforming to Fe-410-W (Gde-E-250) quality - A Complete all as specified and as directed by Engr-in-Charge.

Dismantling of fencing wire mesh, any type etc. complete all as specified and as directed.

Supply and fixing Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as directed by Engr-in-charge.

All as per Item No.15 above but except material etc. complete all as specified.

Supply and Fixing for zinc coated concertina coil of thickness 2.50 mm of core wire and 0.5 mm thick cold rolled carbon strip (dia approx 610 mm that covering 6 mtr length and 50 spirals) having weight not less than 8.00 Kg per coil all as directed.

Material and Labour for preparation of new steel surfaces of any description not otherwise descriped over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc crome primer, complete all as specified and as directed by the Engr-in-charge.

Dismantling posts or struts (wood, steel or RCC) any section, posts embedded in concrete, brick work or masonary including taking out embedded portion and making good disturbed ground etc. complete all as specified and as directed.

Material and Labour for Precast cement concrete 1:2:4, type B1 (20mm graded aggregate) as in landings, Cover slabs (for manholes/ drain etc.) chullah hoods, chajjas, water troughts, mangers, shelves and similar articles with plain faces and set in Cement Mortar 1:4 including finished top surfaces cover even & fair Complete all as specified and directed by Engr-in-charge.

Material and Labour for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified Complete all as specified and as directed.

Rough excavation not exceeding 1.5m deep and getting out loose/soft soil all as directed and as specified.

Removing excavated material n.exc. 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as directed by Engr-in-charge.

Material and Labour for 100 mm thick Plain cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate as in sub base for floors complete all as specified and directed.

Material and Labour for sand filling under floors or in foundations including watering and consolidation etc complete all as specified and directed.

Material and Labour for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80mm thickness M-40 Grade Complete all as specified and as directed.

Material and Labour for Providing cement concrete in 1:2:4, type B1 (20mm graded aggregate) as roof kerbs or mud stops, rounded or chamfered on edges Complete all as specified and directed by Engr-in-charge.

Material and labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in two layers of first 10mm thick in CM 1:6 and 5mm thick in CM 1:4 rendering is to be finished even and smoorth without using extra cement etc complete all as specified and as directed by Engr-in-charge.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation etc for shafts, wells, manholes, columns, pier holes etc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in Hard / Dense soil all as specified and directed.

Returning, filling in including spreading, levelling watering and well ramming in layers not exceeding 25cm thick in hard / dense soil complete all as directed by Engr-in-charge.

Material and labour Plain cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate as in foundations of filling and mass concrete all as specified and directed.

Material and labour for Rendering 15mm thick on other than fair faces of brick work or concrete surfaces of walls in CM 1:6 and finished even and smoorth without using extra cement etc complete all as specified and as directed by Engr-in-charge.

Material and Labour for preparation of newly plastered surfaces of wall and applying three coats of white wash Complete all as specified and directed by Engr-in-Charge.

Material and Labour for preparation of new plastered surfaces of wall and applying Two coats of Oil bound distemper over a coat of chalk whiting primer Complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust including brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified.

Material and Labour for 25 mm thick Plain Cement Concrete (1:2:4), typeB1 (using 20 mm graded stone aggregate) as in floors leveling course etc. complete all as specified and directed.

Material and Labour for Coloured Non Skid Ceramic tiles, size of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, 7 to 8mm thick in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the shade of floor tiles including Screed bed or bedding layer of mortar 15mm thick in Cement mortar (1:6) for laying floor finishes Complete including taking down old tiles all as specified and as directed.

Material and Labour for Granite (of any type) stone 20mm thick machine cut in, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing Complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situation etc. complete all as specified.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, etc. including raking out joints, hacking for key, scrubbing down with water, etc Complete and removing the rubbish off the premises to a distance n.exc.50m Complete all as specified and directed.

Material and labour for Rendering 10mm thick on fair faces of brick work or concrete surfaces of walls in CM 1:4 as backing coat for dados etc complete all as specified and as directed by Engr-in-charge.

Material and Labour for Coloured Glazed Ceramic tiles of size 450x300x7 mm thick on Vertical surfaces such as Skirting/ dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles, including 10mm thick rendering in CM 1:4 including takingdown cement plaster etc. Complete all as specified and as directed.

Excavation Post holes in Soft / loose soils (or similar holes) each n.exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Mild Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161 - 1998 grade St - 240 Complete all as specified and as directed by Engr-in-Charge.

Supply and fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.

Supplying and Fixi steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded etc, complete all as specified and as directed by Engr-in-charge.

Supply and Fixing 4 mm thick glass, ordinary quality n.exc 0.5 sqm in each pane with oil putty etc Complete all as specified and as directed by Engr-in-charge.

Material and Labour for Mild steel TMT bars 6 mm to 8mm dia in stirrups, spacers and binders cut to length, bent to shape required including cranking, bending spirally for hooping ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips Complete all as specified and as directed.

Material and Labour for Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete

Material and Labour for Reinforced cement concrete (nominal mix) in cement concrete Type B0 1:2:4 (12.5mm graded aggregate)for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed copper conductor cable in and including PVC cassing capping complete with and including all accessories/fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly One light point/fan point controlled by one, one way socke out let 5Amp/6Amp switch complete all as specified and directed by Engr -in -charge for

M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed copper conductor cable in and including PVC cassing capping complete with and including all accessories/fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly for One 5A 2 Pin/3 pin switch socket out let multipurpose on same boad with other switches complete all as specified and directed by Engr -in -charge

M & L point wiring with 2.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed copper conductor cable in and including PVC cassing capping complete with and including all accessories/fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly for One 3/5 pin, 15/16 Amp socket outlet point on independent board controlled by one, one way 5/6 Amps switch complete all as specified and directed by Engr -in -charge

Supply and fix switch piano flush type, 05/06 Amps single pole, one way 240 volts in replacement of old u/s complete all as specified and directed.

Supply and fix of socket out let 3 pin, 05/06 Amps (2 in 1 multipurpose) flush type 240 volts in replacement of old u/s complete all as specified and directed.

Supply and fix of socket out let 3 pin, 15/16 Amps (2 in 1 multipurpose) flush type 240 volts in replacement of old u/s complete all as specified and directed.

Supply and fix switch piano flush type, 15/16 Amps single pole, one way 240 volts in replacement of old u/s complete all as specified and directed.

Supply and fix of ceiling rose surface type PVC / Polycarboen, isolated body with three terminals in replacement of old u/s complete all as specified and directed.

Taking down u/s fan regulator resistance type, S&F electronic fan regulator stepped, socket type 400W on the existing phenolic laminated sheet etc as required complete all as specified.

Supply and fix Lumiline LED tube with patti, 2 feet, 10 watts alongwith tube complete all as specified and as directed. Make : Bajaj Cat part No : BCLSB 10 WH or equivalent model in Crompton Greaves Ltd/Philips

Supply and fix Lumiline LED tube with patti, 4 feet, 18 watts complete all as specified and as directed. Make : Bajaj Cat part No : BCLSB 18 WH or equivalent model in Crompton Greaves Ltd/Philips

GKR and CO