REPAIR AND MAINTENANCE OF FURNITURE OF AF STATION JAIPUR

Amount

TABLE BED SIDE:-Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) and both side pre laminated particle board 18mm thick ISI marked including teak wood edging duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge(FD-276/FD-248).

(a) Table Bed Side Top

(b) Side Pane including legs.

(c) Top Middle Self/Bottom Self

(d) Back ply gde BWP type BB

(e) Polishing the frame with two coats of French polish.

Side board:-Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) and both side pre laminated particle board 18mm thick ISI marked including teak wood edging duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge(FD-241).

(a) Side Board Top.

(b) Shutter fixed with piano type hinges continuous 20mm.

(c) sides Pane Including Legs.

(d) drawers.

(e) Knobs 50mm of chromium plated of approved coloured and standard quality.

(f) shelves.

(g) Back ply BWP type BB 6mm thick commercial ply wood (ISI marked)

(h) base Support made of 1st class teak wood.

(i) Polishing the frame with two coats of French polish.

STOOL DRESSING (FD-252/FD-282):- Removing of u/s parts and S&F new part out of 1st class hard wood( Teak wood) Stool Dressing by replacing the following unserviceable parts as per drawing and as directed by Engr-in-charge.

(a) legs made of 1st class teak wood.

(b) short rails 1st class teak wood.

(c) long rails 1st class teak wood.

(d) Recanning 2 mm wide half round and 4 mm wide on borders PVC/ hard rubber shoes of superior qualit.

(e) Polishing the frame with two coats of French polish.

HAT STAND WITH MIRROR:-Removing of u/s parts and S&F to Hat Stand With Mirror by replacing the following unserviceable parts as per drawing and directed by Engr-in-Charge (FD-233).

(a) Mirror of Hat stand 5mm thick (Make: Modiguard/Atul/Saint Gobbain).

(b) Aluminium pegs set of two superior quality as approved.

(c) Fornt sides ply 4mm thick face plywood BWP type BB with teak.

(d) Back sides ply 4mm thick face plywood BWP type BB with teak.

(e) wooden frame.

(f) Polishing the frame with two coats of French polish.

TABLE DRESSING GENTS WITH MIRROR Removing of unserviceable part of furniture and supply and fixing new part made out of 1st class hard wood teak duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins including polishing to replaced part of wooden to match with existing part to make the serviceable item and removing existing U/S mirror with ply of table dressing Gents and S/F new mirror 5 mm thick of clear vision (Make : Modiguard, Saint Gobin) with 6mm thick ply fixed at back (FD-230/31).

(a) Mirror 5mm thick (Make: Modiguard/Atul/Saint Gobbain)

(b) Table top

(c) Drawers all as specified and shown in drg. Provision of Telescopic channelsof make Godrej/Hettich shall be provided as guide rail for smooth sliding of drawers

(d) Bottom made of 18/19 mm thick Prelaminated MDF Board exterior grade.

(e) sides made of 18/19 mm thick Prelaminated MDF Board exterior grade.

(f) Polishing the frame with two coats of French polish.

TABLE DRESSING LADIES WITH MIRROR:- Removing of unserviceable part of furniture and supply and fixing new part made out of 1st class hard wood teak duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins including polishing to replaced part of wooden to match with existing part to make the serviceable item and removing existing U/S mirror with ply of table dressing ladies and S/F new mirror 5 mm thick of clear vision (Make : Modiguard, Saint Gobin) with 6mm thick ply fixed at back (FD-251/378).

(a) Mirror 5mm thick (Make: Modiguard/Atul/Saint Gobbain).

(b) Table top

(c) Drawers all as specified and shown in drg. Provision of Telescopic channelsof make Godrej/Hettich shall be provided as guide rail for smooth sliding of drawers

(d) Bottom made of 18/19 mm thick Prelaminated MDF Board exterior grade.

(e) sides made of 18/19 mm thick Prelaminated MDF Board exterior grade.

(f) Sliding glass shutters 5.0 mm thick plain glass.

(g) Base made of 1st class teak wood.

(h) Polishing the frame with two coats of French polish.

BOOK CASE OPEN SMALL :- Removing of u/s parts and S&F new part out of top made of 18/19 mm thick Prelaminated MDF Board exterior grade/Particle Board (Make: Green Panelmax /Duro/ Asis) of Book case open small by replacing the following unserviceable parts as per drawing and as directed by Engr-in-charge (FD-356).

(a) Top made of 18/19 mm thick Prelaminated MDF Board exterior grade.

(b) shutter made of 18/19 mm thick Prelaminated MDF Board exterior grade.

(c) sides made of 18/19 mm thick Prelaminated MDF Board exterior grade.

(d) shelves made of 18/19 mm thick Prelaminated MDF Board exterior grade.

(e) Base made of 1st class teak wood.

(f) Polishing the frame with two coats of French polish.

TABLE DINING 8 PERSONS (FD-239, 269, 273):- Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing. All new surfaces shall be two coat of french polish with high gloss finish and placing every part intact all as specified in drg and directed by Engr-in-charge.

(a) Table top made of 18/19 mm thick Prelaminated MDF Board exterior grade. with 6mm half round teak wood beading with fevicol and headless nails all round the edges.

(b) Legs made of 1st class teak wood.

(c) Long rails made of 1st class teak wood.

(d) Short rails made of 1st class teak wood.

(e) Corner cleat.

(f) PVC shoe superior quality.

(g) Polishing the frame with two coats of French polish.

Teapoy wooden:- Removing of old unserviceable wooden part and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum, size, shape & design as shown on drg . All new surfaces shall be two coat of french polish with high gloss finish.including tightening the joints by pinning, screwing, nailing and placing every part intact all as specified in drg and directed by Engr-in-charge (FD-278,382).

(a) Table Top made out of 18/19mm thick pre laminated particle board exterior quality including 6mm thick teak wood beading with fevicol and headless nails all round the edges.

(b) Legs.

(c) short rails.

(d) Long rails.

(e) PVC shoe superior quality.

(f) Polishing the frame with two coats of French polish.

TABLE 3'x2' W/O DRAWER:- Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finistall as specified in drg and directed by Engr-in-charge.(FD-284)

(a) Table top made of 18/19 mm thick Prelaminated MDF Board exterior grade. teak wood beading with fevicol and headless nails all round the edges.

(b) Legs.

(c) Long rails.

(d) Short rails.

(e) PVC shoe superior quality.

(f) Polishing the frame with two coats of French polish.

TABLE 3'x2' WITH DRAWER:- Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finistall as specified in drg and directed by Engr-in-charge.(FD-283

(a) Table top made of 18/19 mm thick Prelaminated MDF Board exterior grade. teak wood beading with fevicol and headless nails all round the edges.

(b) Legs.

(c) Long rails.

(d) Short rails.

(e) drawers.

(f) PVC shoe superior quality.

(g) Polishing the frame with two coats of French polish.

TABLE PEG.(FD-384 & FD-277) Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge.

(a) Table top made of 18/19 mm thick Prelaminated MDF Board exterior grade. teak wood beading with fevicol and headless nails all round the edges.

(b) Legs.

(c) Long rails.

(d) Short rails.

(e) PVC shoe superior quality.

(f) Polishing the frame with two coats of French polish.

TABLE WRITING (FD-275, FD-33 & FD-276) Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge.

TABLE WRITING (a) Table top made of 18/19 mm thick Prelaminated MDF Board exterior grade. teak wood beading with fevicol and headless nails all round the edges.

(b) Legs.

(c) Long rails.

(d) Short rails.

(e) Back ply made of 6mm thick plywood.

(f) stiffeners made of 1st class teak wood.

(e) Drawers.

(h) lock of drawers 6 lever 50 mm.

(i) PVC shoe superior quality.

(j) Polishing the frame with two coats of French polish.

TABLE 3x'x3' WOODEN. (DRG NO. FD-94M) Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge.

a) Table top made of 18/19 mm thick Prelaminated MDF Board exterior grade. teak wood beading with fevicol and headless nails all round the edges.

(b) Legs.

(c) Long rails.

(d) Short rails.

(e) PVC shoe superior quality.

(f) Polishing the frame with two coats of French polish.

TABLE CENTER.(DRG NO. FD-274 sh 1/1, FD-375) Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge.

(a) Table top made of 18/19 mm thick Prelaminated MDF Board exterior grade. teak wood beading with fevicol and headless nails all round the edges.

(b) Legs.

(c) Long rails.

(d) Short rails.

(e) PVC shoe superior quality.

(f) Polishing the frame with two coats of French polish.

BED PLYWOOD .(DRG NO. FD-246, 245,247) Removing the existing unserviceable / broken parts and S&F first class hard wood (Teak wood/Bonsum) new parts complete all as specified and shown on drgs shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge.

(a) Ply wood of size 1950x900x12mm commercial BWR quality ISI marked

(b) Long rail for following size 35x90x1980 mm including 35 mm x 5mm flat iron of mild steel bent to right angles to be provided as directed by Engr-in-charge

(c) Short rail

(d) Head board alongwith the legs

(e) Footboard alongwith the legs

(f) stiffeners.

(g) PVC shoe superior quality.

(h) Steel bent clamp for corner.

(i) Polishing the frame with two coats of French polish.

CHAIR DINING OFFICERS. (FD-1105 & TP) Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge.

(a) Rear legs made of 1st class teak wood.

(b) Front legs made of 1st class teak wood.

(c) Side rail made of 1st class teak wood.

(d) Fornt or Back rail made of 1st class teak wood.

(e) Stiffeners made of 2nd class teak wood.

(f) Back strip made of 1st class teak wood.

(g) PVC shoe superior quality.

(h) Replacement of old/us Seat and S&F new Seat made made of foam 40D Make: Sleep Well, Featherfoam, Kurlon(Gold) duly covered with tapestry cloth with fixed over 12 mm Plywood (Make: Greenply/Century /Duro) of BWR Grade ISI Marked confirming to IS-303. Note : Rate of tapestry cloth shall not be less than Rs 400/-per RM and colour and texture of Tapestry shall be approved by AGE(I).

(i) Polishing the frame with two coats of French polish.

CHAIR WOODEN BOTTOM.(DRG NO. FD-28556,225,228) Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge.

(a) Rear legs made of 1st class teak wood.

(b) Front legs made of 1st class teak wood.

(c) Side rail made of 1st class teak wood.

(d) Fornt or Back rail made of 1st class teak wood.

(e) Stiffeners made of 2nd class teak wood.

(f) Back strip made of 1st class teak wood.

(g) PVC shoe superior quality.

(h) Seat made out of 6mm thick Plywood BWR Grade ISI Marked confirming to IS-303.

(i) Polishing the frame with two coats of French polish.

TABLE OFFICER OFFICE(WOODEN.) Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge.

(a) Replacement of old/us top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I of shade 6mm half round teak wood beading with fevicol and headless nails all round the edges.

(b) stiffeners made of 2nd class teak wood.

(c) PVC shoe superior quality.

(d) drawers Provision of Telescopic channelsof make Godrej/Hettich shall be provided as guide rail for smooth sliding of drawers.

(e) shutters made of 2nd class teak wood.

(f) Polishing the frame with two coats of French polish.

TABLE DINING 6/8 PERSONS.(DRG NO. FD-273/FD-30(M)) Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing. All new surfaces shall be two coat of french polish with high gloss finish and placing every part intact all as specified in drg and directed by Engr-in-charge.

(a) Table top made of 18/19 mm thick Prelaminated MDF Board exterior grade. with 6mm half round teak wood beading with fevicol and headless nails all round the edges.

(b) Replacement of old/us legs and S&F new leg made of 1st class teak wood all as specified and shown in drg.

(c) Long rails made of 1st class teak wood.

(d) Short rails made of 1st class teak wood.

(e) corner cleat.

(f) PVC shoe superior quality.

(g) Polishing the frame with two coats of French polish.

SOFA SET 5 SEATER .(DRG NO. FD-373 )

(a) Replacement of old/us Rear legs and S & F new Rear legs made of 1st class teak wood all as specified and shown in drg.

(b) Replacement of old/us Front legs support and S&F new Front legs made of 1st class teak wood all as specified and shown in drg.

(c) Replacement of old/us Side rail and S&F new Side rail made of 1st class teak wood all as specified and shown in drg.

(d) Replacement of old/us Fornt or Back Plywood of 3 seater and S&F new Fornt or Back Plywood made of 12mm thick plywood (Make: Greenply/Century /Duro) of BWR Grade ISI Marked confirming to IS-303.

(e) Replacement of old/us Stiffeners support and S&F new stiffeners made of 2nd class teak wood all as specified and shown in drg.

(f) Replacement of old/us Back strip and S&F new Back strip made of 1st class teak wood all as specified and shown in drg.

(g) Replacement of old/us PVC shoe and S&F new PVC shoe superior quality all as specified and shown in drg.

(h) Replacement of unserviceable cushion for seat/back with new cushion of sofa set 4/5 Seater comprising single piece of seat/back each made of foam 40D of size 22”X21”X100/95mm Make: Sleep Well (Featherfoam)/ Kurlon(Gold) duly covered with tapestry cloth stitched with fine standard thread and providing a chain best quality (at either of 21" side) of make YKK with two runners at both ends superior quality complete all as directed by GE and shown on drg no.FD/MAP/II/02. Note : Rate of tapestry cloth shall not be less than Rs 400/-per RM and colour and texture of Tapestry shall be approved by GE..

(i) Polishing the frame with two coats of French polish.

SOFA SET BERRY LEATHRITE TP (3+1+1)SEATER (a) Repairs to sofa set 5 seater Berry leathrite make by replacement of old U/S part as spring ,leather cushions and wooden FRC of any description of seat and back completely and with fixing new tapestry cloth of approved quality all as specified by Engr-in- Charge.

SOFA SET 5 SEATER (a) M&L for replacing only " 52" wide tapestry cover of cushion with approved quality of tapestry of sofa 5 seater

RACK WOODEN (ANY TYPES)

Replacement of old/us self and S&F new self made of 1st class teak wood all as specified in drg and as directed by Engr in Charge.

Replacement of old/us wooden vertical rail and S&F new vertical rail made of 1st class teak wood all as specified and shown in drg.

Replacement of old/us sides and S&F new sides made out of 1st class teak wood all as specified in drg and as directed by Engr-in-Charge.

Replacement of old/us back and S&F new backs made out of plywood 12mm BWR grade ISI Marked all as specified and directed by GE.

Polishing the frame with two coats of French polish.

CHAIR DINING FD-228,279& Spl:- Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge.

(a) Front leg.

(b) Rear leg.

(c) Stiffener for leg.

(d) Replacement of old/us Seat and S&F new Seat made made of foam 40D Make: Sleep Well, Featherfoam, Kurlon(Gold) duly covered with tapestry cloth with fixed over 12 mm Plywood (Make: Greenply/Century /Duro) of BWR Grade ISI Marked confirming to IS-303. Note : Rate of tapestry cloth shall not be less than Rs 400/-per RM and colour and texture of Tapestry shall be approved by GE..

(e) Frame for seat rest.

(f) Recanning seat 2mm wide plastic cane.

(g) PVC shoe.

(h) 'L' shaped MS clamp 50x25x6mm to legs & seat frame.

(i) Polishing the frame with two coats of French polish.

CHAIR EASY FD-229.

(a) Front leg.

(b) Rear leg.

(c) Stiffener for leg.

(d) Frame for seat rest.

(e) Frame for back rest.

(f) Recanning seat 2mm wide plastic cane.

(g) PVC shoe.

(h) 'L' shaped MS clamp 50x25x6mm to legs & seat frame.

(i) Polishing the frame with two coats of French polish.

CHAIR VERANDAH (FD-256)

(a) Re-canning to seat and back of chair with plastic cane. Note:- The rate quoted by tenderer includes taking down of cane complete.

(b) S&F PVC shoes of approved quality.

(c) M&L preparation to steel surfaces and applying two coats of synthetic enamel paint.

ALMIRAH LARGE STEEL WITH SHELVE.(DRG NO. FD-1031)

(a) Removing unserviceable handle and S&F CP handle 125 mm with nut and bolts as per drg.

(b) Removing unserviceable locks and S&F lock (Make : Godrej) 6 lever as per drg.

(c ) Removing unserviceable locking device and S&F new device including MS Rod rest all as per drg.

(d) Adjustment of the existing shelves by providing new clamps removing unserviceable clamps all as directed.

(e) Taking out unserviceable hinges S&F new hinges of reqd size as per drg.

(f) Taking out unserviceable legs S&F new legs made out of 1 mm MS sheet as per drg.

(g) Taking out unserviceable shelves and S&F new shelve made out of 1mm MS sheet as per drawing.

(h) Taking out unserviceable shutters and S&F new shutters made out of 1mm MS sheet as per drawing.

(j) M&L preparation to steel surfaces and applying two coats of synthetic enamel paint.

ALMIRAH MEDIUM/SMALL STEEL WITH SHELVES.(DRG NO. FD-1032)

(a) Removing unserviceable handle and S & F CP handle 125 mm with nut and bolts as per drg.

(b) Removing unserviceable locks and S&F brass locks of any type 6 lever as per drg.

(c ) Removing unserviceable locking device and S&F new device including MS Rod rest all as per drg.

(d) Adjustment of the existing shelves by providing new clamps removing unserviceable clamps all as directed.

(e) Taking out unserviceable hinges S&F new hinges of reqd size as per drg.

(f) Taking out unserviceable legs S&F new legs made out of 1 mm MS sheet as per drg.

(g) Taking out unserviceable shelves and S&F new shelve made out of 1mm MS sheet as per drawing.

(h) Taking out unserviceable shutters and S&F new shutters made out of 1mm MS sheet as per drawing.

(j) M&L preparation to steel surfaces and applying two coats of synthetic enamel paint.

LOCKER BED SIDE.(DRG NO. FD-1029FD-257)

(a) Removing unserviceable handle and S & F CP handle 100 mm as per drg.

(b) Removing unserviceable hasp and stepple and S&F new hasp and stapple chromiun plated as directed by Engr in Charge.

(c ) Taking out unserviceable hinges S&F new hinges of reqd size as per drg.

(d) Taking out unserviceable legs S&F new legs made out of 1 mm MS sheet as per drg.

(e) Taking out unserviceable shelves and S&F new shelve made out of 1mm MS sheet as per drawing.

(f) Taking out unserviceable shutters and S&F new shutters made out of 1mm MS sheet as per drawing.

(g) Taking out unserviceable conduit pipe and S&F new conduit pipe 20 mm dia of 1.6 mm thick MS CP as per drawing.

(h) M&L preparation to steel surfaces and applying two coats of synthetic enamel paint.

CHAIR CB STEEL WITH ARM.(DRG NO. FD-75)

(a) MS cleats 20x30x65mm wide weld to existing frame for fixing the seat and back.

(b) Frame seats.

(c) Frame back.

(d) 2nd class HW Handle.

(e) PVC shoes

(h) M&L preparation to steel surfaces and applying two coats of synthetic enamel paint.

CHAIR CB STEEL WITHOUT ARM.(FD-75)

(a) MS cleats 20x30x65mm wide weld to existing frame for fixing the seat and back.

(b) Frame seats.

(c) Frame back.

(d) 2nd class HW Handle.

(e) PVC shoes

(h) M&L preparation to steel surfaces and applying two coats of synthetic enamel paint.

TABLE OFFICE CLERK STEEL.(DRG NO. FD-84/1004)

(a) Removing old u/s top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I with 6mm half round teak wood beading with fevicol and headless nails all round the edges.

(b) Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing.

(c) Adjustment of drawers where ever reqd as directed by Engr in Charge

(d) Removing old u/s locks of drawer and S&F brass locks of any type 5 lever as per drg.

(e) Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing

(f) M&L preparation to steel surfaces and applying two coats of synthetic enamel paint.

TABLE OFFICE OFFICER STEEL .(DRG NO. FD-1002/1003)

(a) Removing old u/s top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I with 6mm half round teak wood beading with fevicol and headless nails all round the edges.

(b) Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing.

(c) Removing unserviceable locks of drawer and S&F brass locks of any type 5 lever as per drg.

(d) Removing of unserviceable shoe and S&F new hard rubber shoes as per drawing

(e) M&L preparation to steel surfaces and applying two coats of synthetic enamel paint.

BOOK CASE STEEL.(DRG NO. FD-90M)

(a) Shelf : M&L for removing old worn out Shelf from the Book Case Steel Supply and fixing of new shelf made out of 1 mm thick MS Sheet . Rest all as specified on drg and as directed by Engr in Charge.

(b) Shutters : M&L for removing old worn out Shutters from the Book Case steel Supply and fixing of new Shute with made out of 1 mm thick MS Sheet with 3mm plane glass . Rest all as specified on drg and as directed by Engr in Charge.

(c) Lock: M&L for removing old worn out lock from the Book Case steel Supply and fixing of new lock (Set of four lock with one set of key)(Make : Godrej). Rest all as specified on drg and as directed by Engr in Charge.

(d) Handle: M&L for removing old worn out handle from the Almirah med steel supply and fixing of new handle of best quality . Rest all as specified on drg and as directed by Engr in Charge.

(e) M&L preparation to steel surfaces and applying two coats of synthetic enamel paint.

CHAIR REVOLVING/CHAIR EXECUTIVE.(DRG NO. TP)

(a) Seat & Back : M&L for Removing the existing old unserviceable seat and back from the chair and re-upholestering with new estry/Fabric/Leatherite Rexene cloth approved quality after providing cushion of 40mm 32 density PU foam of Make:Sleepwell/Kurl On fixed over 12mm BWR plywood all as specified on drg and as directed by Engr in Charge.

(b) Castor Wheel : M&L for Removing the existing unserviceable or broken castor wheel and S&F of New Castor wheel to the chair in suitable pattern/model to match the original all as specified on drg and as directed by Engr in Charge.

(c) Handle : M&L for Removing the existing broken/ unserviceable handle from the chair and S&F new handlemade out of Black Integral Skin Polyurethene reinforced with MS insert scratch and weather resistant to the chair in suitable pattern/model to match the original all as specified on drg and as directed by Engr in Charge.

(d) Bottom Base : M&L for Removing the existing unserviceable or worn out bottom base from the Chair. Supply and fix new Base to the chair in suitable pattern/model to match the original all as specified on drg and as directed by Engr in Charge.

(e) Gas lifting Hydrolic System : M&L for Removing the existing unserviceable Gas lifting Hydrolic System of various types from the Chair. Supply and fix new Gas lifting Hydrolic System to the chair in suitable pattern/model to match in original all as specified on drg and as directed by Engr in Charge.

BED HARD .(DRG NO. FD-E6/MAP08(R))

(a) Removing old u/s top and S&F new top of plywood (Make: Greenply/Century/Duro) top 12mm thick BWR Grade ISI Marked confirming to IS-303 of Bed plywood (Make: Greenply/Century/Duro) mdae to shape & size as shwon on drawings, all as specified on drg and as directed by Engr in Charge.

(b) Removing old u/s hradrest and S&F new headrest made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I. all as specified on drg and as directed by Engr in Charge.

(c) Removing old u/s footrest and S&F new footrest footrest made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I. including dismatling of old unserviceable top without disturbing the othe parts. all as specified on drg and as directed by Engr in Charge.

(d) M&L preparation to steel surfaces and applying two coats of synthetic enamel paint.

TABLE BED SIDE .(DRG NO. FD//E6/MAP/15(R))

(a) Removing old u/s top and S&F new Top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I with 6mm half round teak wood beading with fevicol and headless nails all round the edges.all as specified on drg and as directed by Engr in Charge.

(b) Removing old u/s top drawer and S&F new Top drawer made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I of with front side with 12mm BWR grade plywood in thrree sides and 6mm BWR plywood as bottom along with Chromium Plated handles with as specified and shown on drg .

(c) Removing old u/s bottom drawer and S&F new bottom drawer made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I with front side with 12mm BWR grade plywood in thrree sides and 6mm BWR plywood as bottom along with Chromium Plated handles as specified and shown on drg.

(d) Removing old u/s side and S&F new Side made of 18/19 mm thick Prelaminated MDF Board exterior grade ISI marked confirming to IS-14587 Grade-I. all as specified on drg and as directed by Engr in Charge.

(e) M&L preparation to steel surfaces and applying two coats of synthetic enamel paint.

CHARPOY WITH HARD TOP.(DRG NO. FD-220)

(a) Removing old u/s top and S&F plywood (Make: Greenply/Century/Duro) top of size 1930X900MM, 12mm thick BWR Grade ISI Marked confirming to IS-303 of Charpoy with Hard top mdae to shape & size as shwon on drawings, complete all as specified and directed by AGE. 12x6mm thick half round teak wood beading shall be provide alround the edges of plywood with suitable adhesive and headless nails.

(b) Replacement of old /unserviciable stiffner and S&F new stiffner of MS section 900mmx40mm x5mm with suitable semi circular nut bolts all as directed by Engr-in - charge. Before fixing stiffner shall be painted two coats with synthetic enamel paint Black over a coat of red oxide primer complete all as specifed and directed.

(c) Replacement of old u/s nuts & bollts 65 mm long , 5mm dia semi circular top with nuts & two washer complete all as specified and directed

(d) M&L preparation to steel surfaces and applying two coats of synthetic enamel paint.

TABLE COMPUTER.(DRG NO. FD/E6/MAP/03)

(a) Removing old u/s top and S&F new Top made of 18/19mm thick Prelaminated MDF Board exterior grade (make Greenlam/Century) ISI marked confirming to IS-14587 Grade-I with 6mm half round teak wood beading with fevicol and headless nails all round the edges.

(b) Removing old u/s Shelves/bottom and S&F new shelves/bottom made of 18/19 mm thick prelaminated MDF Board (Make : Greenlam/Century) ISI marked confirming to IS-14587 Grade-I,Type-II with telescopic chanell as directed by Engr-in-Charge

(c) Removing old u/s side/partion and S&F new Side/partion made of 18/19 mm thick prelaminated MDF Board.all as specified on drg and as directed by Engr in Charge..

(d) Welding to steel frame of computer table.

(e) Removing old u/s shoe and S&F newPVC adjustable shoe superior quality.

(f) M&L preparation to steel surfaces and applying two coats of synthetic enamel paint.

CHAIR COMPUTER.(DRG NO. FD/E6/MAP/01)

(a)Replacement of unserviceable leatherite rexine/ tapestry of seat/back both and S&F new fabric containing material like Acrylic, Polyester, Poly viscose Poly propylene of colour as approved by AGE(I) all as specified in drg and directed by Engr-in- charge. .(Fabric shall be as per sample kept in yard).

(b) Seat & Back: Removing the existing old unserviceable seat and back from the chair and re-upholstering with new Fabric containing material like Acrylic, Polyester, Poly viscose Poly propylene of colure as approved by AGE(I) on PU foam of 50mm 50 density fixed over 12mm BWR plywood all as specified on drg and as directed by Engr in Charge.

(c) Removing of old/us gas lift and providing new gas lift maintenance free, environmental friendly chrome free cylinder tube shall be fixed in a MS black powder coated into centre column tube 38mm dia and 2mm thick, It shall have 100mm stroke length and gas pressure of 300 force all as specified in drg and directed by Engr-in-charge.

(d) Replacement of old wheel and providing new wheel of computer chair superior quality all as specified on drg and as directed by Engr in Charge.

CHARPOY GI PIPE WITH NYLON NEWAR (DRG NO.FD-220)

(a) Removing of unservicable long rail and Supply and Fixing new long rail of GI trubing 32 mm bore medium grade (ISI marked) duly threaded both ends all as specified in drg and directed by Engr-in-Charge.

(b) Removing of old unserviceable short rail and making of short rails from long rails obtained from item No. 4.01 and threading the both ends of short rails and fixing in position complete as specified in drg and directed by Engr-in-Charge.

( c ) Removing of old unserviceable legs and making of legs from short rails obtained from item No. 4.02 and threading the both ends of legs and fixing in position complete as specified in drg and directed by Engr-in-Charge.

(d) Removing of unserviceable 3 way elbow and S & F new GI elbow 32 mm dia ISI Marked as specified in drg and directed by Engr-in-Charge.

(e) Removing of unserviceable check nuts and S & F new 32 mm dia GI Check nut (thickness of check nuts shall not be less than 8 mm) complete all as specified in drg and directed by Engr-in-Charge.

(f) Removing/taking down existing nylon newar from G.I. pipe charpoys and tightening of loose components of Charpoy GI pipe before weaving with and including approved new white or light colour nylon newar (not made out of recycled nylon) 50/55 mm wide, closely knitted on both sides and end of newar stiched around, weight of newar in each charpoy not less than 1.5 kg complete all as specified in drawing and directed by Engr-in-Charge

CHAIR SCHOOL WITH HAND BOARD.(DRG NO. FD/E6/MAP/05)

(a) Removing old unserviceable seat/back of Chair and S&F one piece PVC Seat and back virgin quality all as specified on drg and as specified and shown on drg

(b) Removing old unserviceable hand board of Chair and S&F new hand board top openable fixed on right hand side made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Duro/ Asis) ISI marked confirming to IS-14587 Grade-I with standard PVC edging as specified and shown on drg.