NIT NO. 03(M-3)ITEM NO.29

PART-A(PumpSet)Supply of 10 HP Submersible Pump Set fitted with dynamically balanced impeller mounted on stainless steel shaft with protection sleeve having stage bowls of closed grained bronze impeller complete in C.I Body. The pump will be directly coupled to required wet type induction motor of speed 2900 RPM suitable for operation on 3-ɸ, 415V, 50Hz, AC supply, with spare pump set to serve as ready replacement. Discharge: 450 LPM, Head: 70 mtr, Stage - 10.Delivery size:50 mm. DJB SOR 2.10.16.Make of Pump: BS/KSB/SU/As approved by DJB.

Making and Supply of wall mounted (heavy Duty 4 Nos L type Hooks ) Cubical Panel for Incomer Power supply suitable for wall mounting of size 500 X 300 X 250 mm (minimum) made out of 16 SWG CRCA sheet, Indoor type, duly painted with powder coating, complete with following switchgears and instruments duly installed with their complete connections and inter connections with copper cables etc. as per requirement and with cable connectors for making required power supply connections by fixing the 4 pole 63 amp ELCB – 1 No., 3 No’s indicating LED , 100 amp panel mounting change over switch Make of insertions - L&T/BCH/ Schneider/DJB Approved

Supply of four core PVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volt, conforming to IS 694 of 10 sq mm. Make: Havells / Fort Gloster/ Grandley / ICL / CCI/ICC/Universal/any approved make in DJB.

Supply of three core flat cable with bare bunched copper conductor insulated & sheathed with PVC for submersible pump motor with voltage grade upto 1100V of 6.0 sq mm.Make: Havells / Fort Gloster/ Grandley / ICL / CCI/ICC/Universal/any approved make in DJB.

PART-C(Mechanical)supply-Of G.I. Pipe 50 mm dia, Medium-class, each of 3'' Meters Long, duly threaded on both-ends, welded & fitted with G.I./ M.S. Flange of both ends with a Slot for Submersible-Cable. Welding of M.S Strips at both ends on flange.Make of Pipe: Jindal / TATA.

Supply-Of Tail-piece of Medium-Class G.I.-Pipe 500 mm Long with one-end threaded, as per out-let of Pump and another-end flanged, as per size of G.I. Pipe 50 mm dia. Make of Pipe: Jindal / TATA.

Supply-Of Orifice-Assembly 50 mm dia, 0.6 Meter Long, Double-Flange. One side M .S. Flange and other side G.I flange.Make of Pipe: Jindal / TATA

Supply of CI DF Non Rising spindle sluice valve PN 1.0 / IS:14846 CI body / wedge /bronze ring/SS/l410 Shaft construction of size: - 50 mm. DJB SOR E&M 2022 item Code 4.7.2 Make: Kirloslar/IVC/DJB Approved

Supply-Of C.I. D/F swing-type Non-Return Valve, as per 1S:5312 (Part 1 & 2) PN 1.0, 1S:14846, C.I. Body door.bronze to rubber ring of size: 50 mm dia.DJB SOR E&M 2022 item Code 4.9.2 Make: Kirloskar /IVC/DJB Approved

Supply-Of Rubber-packing 50% Neoprene sheet(1.5mm to 25mm) as asitable for 50mm dia Flange.DJB SOR E&M Item Code 22.6.1

Supply-Of M.S. Clamp of 600 mm Length, duly fabricated out-of 12 mm thick, 50 mm wide M.S.Plate for holding the Pipe of 50 mm dia.

Supply-Of G.I. Bend 90⁰ x 50 mm dia, having Flange at both-ends One side M .S. Flange and other side G.I flange.

S/o 6 mm PVC coated size steel wire rope for holding the pump.Make:Usha/ISI

Supply-Of suitable size Nut-Bolts of different size i.e. 1.5” & 2.5” Long, threaded of good quality.

Supply-Of Bore-Cover Plate of Size: suitable for 300 mm Casing made out from 4 mm thick M.S.-Sheet in 2-Halves and a Circular-Hole of holding 50 mm dia pipe in center with Locking arrangement by Nuts & Bolts.

Installation, Testing and Commissioning Charges.

Darshan Engineering Works

Raj Engineering Co.

M/S.SUPER TRADERS & ENGINEERS

GURUDEV ENGINEERS

M/S ARYAN TRADERS AND ENGINEERS