SITC of AC Machines

Amount

Supply & delivery of non-inverter, 1.5 TR split type room air - conditioner (R410A) fittedwith power saving rotary compressor having turbo cooling capacity 5300Wt suitable for operating at 230V +/- 10% 50 Hz. Single phase AC supply with EER 2.76 discharge air flow volume (CFM) H x L X M 560/462/376 moisture removal capacity (liters/hr) 3.3 having features - modes (Auto,cool,fan,dry) air flow (horizontal louver/ vertical swing) sleep mode timer off/on anti freeze thermostat bio/active carbon/dust air filter with Star rating BEE 2 star [ Make - O-General / Mitsubishi Electric /Carrier/Daikin]

Installation,testig & Commisioning of 1.5 Tr Split A.C. both indoor/ outdoor Unit .

S & F of following size copper pipeline for Concealed Split AC machine:- i) 15.88 mm OD with minimum thickness 0.9 mm with 9 mm nitrile rubber tube ( Accoflex/K-flex/Armasell) for insulation with proper wrapping insulation tape.

ii) 6.35 mm OD with minimum thickness 0.9 mm with 9 mm nitrile rubber tube ( Accoflex/K-flex/Armasell) for insulation with proper wrapping insulation tape.

Supply & Laying of 4 core 2.5 sq.mm Copper Cable ("FR") on wall incl. making connections as per direction of EIC.(As Control Cable from ODU to IDU ) ( make : Havells/ Finolex/ Pollycab)

Supply & Laying of 25 mm dia PVC drain Pipe, (Medium) including S&f necessary fittings (Make: Supreme/Oriplast/Finolex)

a) Supplying, fabrication & fixing M.S u-channel of 6 mm thick of size (75 mm x 40 mm x 40 mm) for making platform for installation of outdoor unit of 2 TR split AC incl. drilling 3 nos holes in each channel including cutting holes into the wall & grouting the same with cement concrete (1:1 ½ :3) etc. fabricated with horizontal angle of 50 x50x6 mm including vertical supporting angle 40 mm x40mm x 6 mm in each platform and also V-guard is also provided in each platform.The entire structure should be baricaded with 25x6 mm GI strip & safe for ODU Maintenance .Base area of the platform is 4ft x3ft as per Machine configuration & load with adequate service access as per direction of EIC.

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for AC installation, per storey of building per vertical run

Supply & Fixing 30A OLP3 Stater,operating voltage 90-320 V 4-module box IP20(146x88x44mm)digital display protection for AC machine on wall with suitable screw,nut bolt & other fixing arrangement as per direction of EIC.,MK: Electron/pwd approved equivalent make.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. i)2x4 sqmm + 1x2.5 sqmm copper wire ( for AC power supply)

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. as per G S. i) 2.5 sqmm

ii) 4 sqmm

Supply & fixing of single phaseTimer mini control panel on wall comprising of - i)2 Pole 230V, 25A MCB, Legrand Make-1 nos ii)230V ac mini power contactor ,(2 no+2nc) coil voltage -230 V AC- 2 nos , iii)Digital timer /Dial type analogue timer 24 hour capacity 230 V AC supply-1 nos iv) 230 V ,25 A DP MCB C- type iv)230 V AC toggle switch v)Single pole double tthrow ,6A ,230 V-1 nos , Vi)230 V,15Amp. 3 way terminal-3 set vii) indicator lamp(red,green) L&T-4 nos viii) 15 Amp. 8 way nutral bar to be mounted on DIN rail with necessary interconnection with 2.5 sq. mm Cu flexible Wire (Finolex/Havels/KEI) including Ferrule marking & socketing with in the 12 way SPNDB MCB Enclosure Box. wiring should be made for 1 Working + 1 Standby Unit. Make-Cabtree/ABB /L&T

S&F. Outdoor Loop box CSJB2520 (250 x 200 x 105), Mk-Sintax with 415V,32 Amp. DP MCB type Isolator (Make :-Legrand/ABB/L&T) on din rail & the box fixed on wall with nut bolt arrangement as per GS. (Make and model no. of each and every item to be approved by EIC) (Rates should be quoted inclusive of LWC, GST and all other related taxes & duties)

FAME ENGINEERING (BID ID -5707039)

M/s Singh Electrical Works (BID ID -5664203)