SPL REPAIRS TO BLDG NO P 220 JCOS MD ACCNS AT MEADOWS LINES UNDER AGE B/R (S) NO I AND AGE E/M (S) OF GE (SOUTH) SECUNDERABAD

Amount

Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons, riser of steps, skirting, dado etc laidbedded and pointed in any mortar complete all as specified and as directed.

Demolition of cement concrete un-reinforced paving not exc 15cm thick above or below ground level complete all as specified and as directed.

Demolition of reinforcement cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.

M&L for vitrified tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified and directed.

Ditto all as per item No 05 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified and as directed.

M & L for PCC 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) 25mm thick as in levelling course, sub-floors and paving etc complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) complete all as specified and as directed.

M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified and as directed.

M&L 16 to 18mm thick granite stone (of any type ) work (table rubbed and polished) in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including grinding and mirror polishing complete all as specified and as directed. (Note : Rate shall be inclusive of proving grooves in steps and Colour of granite shall be as approved)

Rounding ( chamfering) to edge of marble/granite slab edge with mirror polishing such complete all as specified and as directed.

M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges kitchen plateform etc of rough finished flat surfaces concrete complete all as specified and as directed

M&L for reinforcement cement concrete type B0 (1:2:4) (using 12.5mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors roofs, landings, balconies canopies, deck slabs and in shelves, kitchen shelfetc complete all as specified and as directed.

S&F TMT bars 10 mm dia and over and cut to length bent to shape required including cranking, bending, hooking ends and bending with MS wire not less than 0.9mm dia or securing with clips quality conforming complete all as specified and as directed.

Taking down chowkhats or frames with shutters without taking off shutters from frame exe 1.5 Sqm and n.exc 4 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutters without taking off shutters from frame n. exe 1.5 each complete all as specified and as directed.

S&F for Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening complete all as specified and as directed.

S & F for Factory made solid PVC moulded with particle board core door shutter 28 to 30 mm thick panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face,supplying and fixing in frame at site as per specification and drawing complete all as specified and as directed.

S&F Pressed steel door frame of size 125 X60 mm with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and as directed .

S&F Pressed steel door frame of size 105 X60 mm with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and as directed .

M&L for PCC 1:2:4 Type B0 ( using 12.5 mm graded crushed stone aggregate ) as in filling in pressed steel door frame complete all as specified and as directed .

M & L for cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate as in lintle upto 1.5m clear span, steps, bed plates, kerb & coping including necessary formwork complete all as specified and as directed.

S&F IInd class hardwood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed.

S&F 40mm thick second class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial venneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F for 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted withcut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F for mild steel holdfast, bands, straps, bracket/ clamp for eves gutter, valley gutter and similar conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L in repairs for 18mm thick plywood of grade (BWR), type BB fixed with nails as in cupboards/Almirah Shutters complete all as specified and as directed.

M&L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish colour and pattern as approved and fixed over plywood with approved adhesive complete all as specified and as directed.

M&L for 125mm long Aluminium handles, cast type, polished bright complete all as specified and as directed.

S&F Aluminum anodized barrel bolt of extruded section 125mm long complete all as specified and as directed.

S & F in repair of 125 mm Hasp and staple, safety type, aluminium hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and as directed.

M & L for prepartion of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide , zinc chrome primer including preparation of new steel surface of any description over 10 cm width and girth complete all as specified and as directed.

S&F in butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 complete all as specified and as directed.

S&F extruded aluminum alloy handle fabricated type anodized 150mm long complete all as specified and as directed.

S&F Aluminum anodized barrel bolt of extruded section 150mm long complete all as specified and as directed.

S&F magnet catcher for cupboards or wordrobe etc complete all as specified and as directed.

S&F of 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate etC complete all as specified and as directed.

S&F for 300mmlong aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body & tongue, anodised with hard drawn spring of 140mm size fixed in floor complete all as specified and directed

S & F powder coated anodised aluminium frame,three track sliding for windows, fixed/top hung frame for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S & F powder coated anodised aluminium sliding window shutter and top hung ventilator shutters with sash bars aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips rubber packing ,locking arrengement complete all as specified and directed. (note: Glass panes and wire mesh shall be measured and paid seperatly )

M&L for Mild steel frame work such as grills, framed guard bars confirming to IS Fe 290 -0 Gde E-165 complete all as specified and directed .

Supply only Aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples complete all as specified and as directed.

S & F tinted glass ordinary quality 5.5mm thick and glazing with oil putty/glazing clips/beadings if required of any description complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan- necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F for 110mm dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and as directed.

S&F for 110mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F for 110mm dia PVC (SWR) bends with acess door any radius complete all as specified and as directed.

S&F for 110mm dia PVC (SWR) branch piece single (Single T ) equal or unequal complete all as specified and as directed.

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and as directed.

S&F for 75mm dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and as directed.

S&F for 75 mm dia PVC (SWR) bends of any radius complete all as specified and as directed.

S&F for 75 mm dia PVC (SWR) bends with acess door of any radius complete all as specified and as directed.

S&F PVC (SWR) branch piece, single (SingleT ) of radius equal or unequal, 75mm dia. complete all as specified and as directed.

S&F PVC (SWR) branch piece, single (Single Y) of radius equal or unequal, 75mm dia. complete all as specified and as directed.

S&F PVC (SWR) vent cowl, 75mm dia. complete all as specified and as directed.

M&L PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repairs vitreous china ware wash hand basin white flat back of size 550x 400 mm with pedestal including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections complete all as specified and as directed.

S&F in repairs 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts complete all as specified and as directed.

S&F in repairs for bib taps long body with flange cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron pipe or for brass fancy for CP brass fancy type 15mm dia complete all as specified and as directed.

S&F in repairs two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup complete all as specified and as directed.

S&F in repairs angular stop cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup complete all as specified and as directed.

S&F in repairs vitreous china ware wash down white water closet pan (pedestal pattern with trap incl connecting to drain and flushing pipe, antisyphonage pipe incl PVC sheet cover etc complete all as specified and as directed.

S&F in repair PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handle including brackets complete all as specified and as directed.

S&F in repair of Chromium plated tubular towel rail 20mm dia 600mm long fixed with suitable steel screw etc complete all as specified and as directed.

S&Fin repairs Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F in repair chromium plated grating doom 100mm dia with provison of with or without hole , fixed with suitable solvent cement etc complete all as specified and as directed.

S&F in repairs for plate rack of stainless steel of size 31X36X10 (inch) with steel sleevs & hanging arrengement for utensile, complete all as specified and directed

S&F in for Corner glass self assembly size 300mm with chromium plated bracket guard and railing complete all as specified and directed

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring jointslaid in trenches and in floor etc using synthetic rubber adhesive cement solvent complete all as specified and as directed.

S&F in repairs PVC connection 15 mm dia and 600 mm long with both end nuts complete all as specified and as directed.

S&F wall mixer with provison of overhead shower with 115mm long bend pipe on upper side connecting legs & wall flanges complete all as specified and directed. Make FLR-5273UPR of jaquar and equivalent

S&F in repair 20mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed .

Taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 25mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F for GI Tubing bore of dia 20mm Tubes, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S& F 20mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcm including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and as directed.

S& F 25mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcm including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and as directed.

S&F in repairs for providing 25mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed.

S&F in repairs for providing 20mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes. complete all as specified and as directed.

S&F in repairs for providing 20mm dia CPVC gate valves screwed both ends for iron pipes complete all as specified and as directed.

S&F in repairs for providing 25mm dia CPVC gate valves screwed both ends for iron pipes complete all as specified and as directed.

Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed

S&F rotational moulded Polyethylene [HDPE] Water Tanks, Triple Layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes complete all as specified and as directed.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe bore dia of 25mm (Minimum weight 455 gms) complete all as specified and as directed.

Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed.

M&L precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded crushed stone aggregate) and setting in cement mortar (1:6) complete all as specified and as directed.

Providing precast cement concrete solid building blocks or slabs Type C1 1:3:6 (20 mm graded crushed stone aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar(1:4), complete, in walls complete all as specified and as directed.

Taking down cement plaster on brick /stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MoD land complete all as specified and as directed.

M&L for rendering in two layer i.e.5mm thick in CM 1:4 including mixing with water proofing @3% of the weight of cement used in top layer of 5mm thickness or as per manufacturer's instruction compound over 10mm thick in CM (1:6) on concrete/block masonry surfaces and finished even and smooth without using extra cement complete all as specified and as directed. (Note WPC shall be measured and paid separately under relevant item)

M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for preparing old plastered surface of ceilings by removing dust, loose particles, cement laitance, curing compound, oil, grease or other contamination and metal surface free from rust, scale, oil and grease and rendering 15mm-20mm thick fibre reinforced polymer modified repair mortar with bonding agent of M/s MC-Bauchemie/STP/CIPY/SIKA/ Pidilite/ Dr fixit/ Asian Paints/ Thermax applied as per manufacturers instruction complete all as specified and as directed

M&L for preparation of newly plastered wall surfaces with 3mm average thick wall care putty and applying two coat of oil bound distemper over one coat of primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed.

M&L for preparation on newly plastered external wall surface and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint complete all as specified and as directed.

M & L for preparing new plastered or unplastered surfaces on ceilings including cornices and applying three coat of white wash complete all as specified and as directed .

M&L for 10 mm thick Plaster on RCC roof slab and sunken portion with CM (1:3) including water proofing compound @ 3% by weight of cement or as per manufacturer's instruction shall be carried out complete all as specified and as directed. (Note : WPC shall be measured and paid separately under relavant item)

M&L for PCC (1:2:4) type B-0, (using 12.5 mm graded crushed stone aggregate as in roof padding / sunken floors and similar work using WPC @ 3% by wt of cement used or as per manufacturer's instruction complete all as specified and as directed. (Note : WPC shall be measured and paid separately under the relavant item)

M&L for preparing plastered surfaces and applying primer @ 0.30/Kg per sqm and applying tack coat of bitumen 85/25 @ 1.2 kg/Sqm laying 3.0mm thick polyster reinforced APP modified water proofing membrane weighing not less than 3.5kg/sqm 100 mm overlaps both longitudinally and transversely by torch bonding over coat of hot blown and one coat of bitumen based paint @1.20 ltr/sqm over APP membrane including removal of existing water proofing treamant on roof with plaster, sunken slabs, edges and vertical surfaces complete all as specified and as directed.

M&L for applying a coat of reflective bitumenous aluminium paint @ 0.15 Kg / sqm over Bitumen surface complete all as specified and as directed.

Supply only water proofing compound. complete all as specified and as directed.

M&L for complete removal of old plastered surfaces of ceiling and applying two coats of oil bound distemper complete all as specified and directed.

M&L for complete removal of existing treatment on wall by scrapping, washing, cleaning etc and over a coat of 3mm average thick wall care putty and applying two coats of acrylic emulsion distemper over a coat of primer including filling of cracks, holes and including leveling the surface which undulation found with wall care putty etc. complete all as specified and as directed.

M&L for complete removal of existing treatment of old decorated external wall surface by scrapping, washing, cleaning etc and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint incl filling cracks, holes using wall care putty complete all as specified and as directed.

M&L for PCC type D2 1:4:8 (using 40mm graded crushed stone aggregate) in foundation, filling and mass concrete complete all as specified and as directed.

M&L for PCC 1:2:4 type B2 (using 20mm graded crushed stone aggregate) as in surface channel and drain & benching of manhole and finishing even and smooth without using extra cement complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement 20mm screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut kota stone slab 20-25mm thick in riser of steps, treads, skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and rounding of edges complete incl 10mm thick rendering in CM (1:3) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and directed.

M&L PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in 75mm thick as in sub base complete all as specified & directed.

S&F for glossy finished heavy duty chequered cement concrete tiles 30cmx30cmx25mm thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:6) in floors complete all as specified and as directed.

M&L for 75mm thick plain cement concrete in (1:3:6) type C1 using 20 mm graded crushed stoneaggregate as in plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for uprooting of wild trees such as grass/bushes etc from the roof / wall surfaces / AC sheets / soil pipes surrounding including its penetated roots with suitable cleaning chemical and making good to the damaged plaster by providing CM 1:3 and finish the surfaces to match with the existing surface complete all as specified and as directed.

Taking down existing unserviceable point wiring of any type/ size of light/fan/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators etc and removal of unserviceable material out of site area all as specified & directed.

Taking down existing unserviceable light fittings, security light fittings, bulk head fittings, fall ceiling light fittings etc. from any height of building complete all as specified & directed.

Taking down existing unserviceable MCB's/MCCB's/Distribution boards any capacity complete all as specified & directed.

M & L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded, copper conductor FRLSH cable of 1100V grade drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20 mm bore with conduit accessories concealed in wall /floor and fixed on ceiling/roof/truss/columns etc, including provision of fabricated branded pressed steel terminal modular box of suitable sizes with 1.3mm thicknes for housing the modular switches, sockets, fan regulators etc complete concealed in walls and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one light point controlled by one switch. Note :- (1) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. (2) The cost of cutting of chases of required width and depth for concealled conduit incl plastering, making good to disturbed surface, painting two coats to match the existing wall colour is deemed to be included in the quoted rate by the contractor.

All as per Sl item No 4 above but for One ceiling fan/exhaust fan point controlled by one switch through regulator (Fan-12 & Exhaust fan-6 = 18) complete all as specified and as directed

All as per Sl item No 4 above, but for One 5 Amps socket outlet point on the independent board. complete all as specified and as directed

All as per Sl item No 4 above, but for One 5 Amps socket outlet point on the same board. complete all as specified and as directed

All as per Sl item No 4 above here in before, but for One Bell point controlled by one, bell push complete all as specified and as directed

All as per Sl item No. 4 here in before, but for wire 2.5 Sqmm for Power point. complete all as specified and as directed

S&F in repair Modular switch 1 way 6A , 1-module all as specified and directed. complete all as specified and as directed

S&F in repair Modular switch 1 way 16A with indicator, 1-module complete all as specified and as directed

S&F in repair Modular socket, shuttered type, 6A - 3 pin 2 -module complete all as specified and as directed

S&F in repair Modular socket, shuttered type, 6/16A - combined 2-module complete all as specified and as directed

S&F in repair Modular switch 2 way 6A,1 module complete all as specified and as directed

S&F in repair Modular Bell push 6A 1 module complete all as specified and as directed

S&F in repair Electric Bell Ding-dong working on 230 volts AC Supply complete all as specified and as directed.

S&F in repair ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed

S&F in repair lamp holder suitable for B-22 base lamps insulated body surface bakelite with back plate suitable for angle / batten fittings complete all as specified and as directed

S & F 15 Watt LED Bulb 5 star rated efficacy not less than 100 Lumen/watts,rated life 25000 burning hours with lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings including taking down the old unserviceable complete all as specified and as directed.

S & F 7 Watt LED Bulb 5 star rated efficacy not less than 100 Lumen/watts,rated life 25000 burning hours with lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings including taking down the old unserviceable complete all as specified and as directed

M&L for replacement of old unserviceacble light fitting with LED batten light fitting 20 Watts 4 feet surface / wall mounted aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy not less than 120 Lumen/Watt, rated llife 50000 Burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make: Crompton CCS-100-20-65-HSL2-DP-NWH/ Havells ENDURALINEARPROBS20WLED865PCSSIND / Bajaj-BCLAB20WCWLEDXT

S & F 10 W surface / wall mounted 2 feet LED batten light fitting input voltage range 250 V, input frequency 50Hz, efficacy not less than 100 Lumen/Watt rated life 25000 burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make:Crompton CCS-103-10-65-SL-DP-NWH/ Havells LHEXAZP7PN1W010 / PHILIPS BN021LED12S 6500K PSU GR / WIPROLL20-111-XXX-65NE3 /Bajaj-BCLAB10WLEDCWLED

S & F LED light fitting 10W bulkhead luminaires, efficacy not less than 100 lm/w, rated life 25000 burning hours including LED light driver holder connecting up with three core flexible copper conductor cable IP 65 out door type metal body of suitable size complete all as specified and as directed. Make: Crompton CIS-306-10-57-SL-DP-NBK/ PHILIPS WT202W LED10S CW PSU S3 PC/ HAVELLS HEXAFT10WLED857SSYMBOPC /WIPRO LW07-141-XXX-57-G1/Bajaj-BIBWP10W LED

M&L for replacement of old unserviceacble light fitting with LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant,efficacy not less than 120 lm/Watts,rated life 50000 burning hours complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with wall mounting bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete suitable for pop/grid false ceiling complete in all respect complete all as specified and as directed Make:Crompton TRP-409-45-57-SL-GL-NSG / HAVELLS ENDURASUNDOWNSL45W LED765PASYBOPC /Bajaj-VISTAP45LWHPOPCSD

S&F in repair MCB SP 6 to 32 Amps 240 volts C- type complete all as specified and as directed

S&F in repair MCB SPN 40 to 63 Amps 240 volts C- type complete all as specified and as directed.

S & F in replacement sheet metal enclosure MCB DB SPN 8 way, 240 volts double door with locking system complete all as specified and as directed .

S & F Vertical loadline type TPN DB 4 way double door with prov of MCCB as incoming 4P, made out of CRCA sheet housing duly powder coated & confirming to IS specification with busbar rating not less than 160 A complete all as specified and as directed. Make :- Havells, Legrand, Standard. Note :- MCCB shall be measured and paid separatly.

S&F in repair MCCBs 415V, 16KA, 100 amps 4 Pole suitable for DB including removing the existing unserviceable one complete all as specified and as directed. Make :- Havells, Legrand, Standard..

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 Amps complete all as specified and directed.

Supply and fix power AC module 240V, 20A complete with 4 module metal flush box, cover plate, Starter, Plug & Socket all as directed complete all as specified and as directed.

M & L Submain wiring with 2 runs of single core 6 sqmm PVC insulated FRLSH multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 25mm dia including one run of single core 6 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and as directed.

All as per Item Sl No-146 above but using 3 runs of single core 4 sqmm. (for Geyser and AC Point in Bed Room of JCOs Md Accn) complete all as specified and as directed.

All as per Item Sl No-146 above but using 3 runs of single core 1.5 sqmm. (for Bldg Security Lights) complete all as specified and as directed.

Disconnection and removing the existing unserviceable earthing and M & L of Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/Main switch all as shown in Electrical Plate No 3 of SSR Part I and connected to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20 mm graded crushed stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom with funnel and wire mesh, common salt and charcoal filling complete including testing on completion complete all as specified and as directed (Note: GI pipe medium grade 15mm dia & GI earth lead 4mm dia upto 7.5 m length is deemed to be included in quoted rate).

Supply and fixing ceiling fans complete with blades,copper winding, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery not less than 210 CFM with service value more than equal to (≥) 6.00, BEE Five star rated with brushless direct current motor (BLDC) white colour complete all as specified and directed Make:Gold Medal cat part no.SCFS 500748/Bajaj Cat part No:ENERGOS 28/ Crompton Cat part No:ENERGION RIVIRA/Havells Cat part No:PRO 28BLDC/Luker Cat part No:ECO28NEOBLDC Regulator 222cmm Note :- Cost for Taking down old existing Ceiling fan and deposit to MES Store shall be born by the contractor only and no extra cost against it shell be paid.

S&F GF tubing Medium grade galvanised 40 mm dia, with all fitting for hanging ceiling fan, the pipe shall be fixed horizontly on wall at both ends by making hole 100 mm deep, fixed with cement mortar (1:1) in such way that ceiling fan can be fixed on it complete all as specified and directed.

M & L for making Fan Hook using MS flat iron 40X6mm thick 0.3m long made to shape suitable for hanging ceiling fan on 40mm dia GI pipe, 02 N os MS nut, bolts and washers complete all as specified and directed.

Supply & Fix Electric water heater, storage type,vertical, single phase, electric operated, 50Hz, steel body heating element up to 2 KW capacity 25 Ltrs, BEE 5 star rated innner tank as per OEM specification with minimum 2 years warranty on over all product (inner tank ,heating element & thermostat) complete with all accessories such as safety valve, thermostate, NRV, connection piece, FRLS multistranded copper conductor cable 3 core PVC insulated, plug top 3 pin 15 Amp , 15 mm dia, brass coupler, flexible pipe suitable to withstand upto 120 °C for hot and cold water, Anchor fastener- 04 Nos of suitable size etc. complete all as specified and as directed. Make:Crompton VERSA 25L / HAVELLS FABIA GHWAFATWB025 / Gold Medal SWMS01025VWH / Bajaj SPECTRUM15096625L/Luker-LPST25

M & L for Cutting existing steel tubing for alterations / additions / taping connection from existing 15 mm dia GI pipe, incerting 'Tee' by screwing both existing pipes for making cold water connection for storage Geysers, the GI pipe shall be concealled to wall complete all as specified and directed.

Supply and fix exhaust fan, metal body AC single Phase 230V of size 300 mm sweep,RPM 1200 with, copper winding,blades,rag-bolts, and frame and louvers complete including making suitable size hole in wall for fixing of fan complete all as specified and directed. Make: Havells Cat part No:Ventil air DSB /Gold Medal EFS851012 HAVAC PLUS /Crompton drift air plus300mm/Bajaj-Supreme plus/Luker cat part No:TuuliLME12

Supply and fix exhaust fan made of sturdy Engineering plastic body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm sweep complete all as specified and directed. Make:Havells Cat part No:Vetil Air DX HS/Gold Medal EFS850310 AIR MAXX/Crompton VENTILUS250MM/Bajaj-Maxima neo/Luker cat part No:Viento LX10

S & F TV CO-Axial socket outlet fixed to wall suitable for modular fitting complete all as specified and directed.

S & F Rigid non-metallic PVC conduit of dia 20 mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and as directed.

VACON INFRASTRUCTURES (BID ID -3491919)

SAI RUPA CONSTRUCTIONS (BID ID -3491555)

harshraj and co (BID ID -3492019)

GUTHIKONDA BROTHERS (BID ID -3492162)