REPAIR AND RENOVATION OF STAGING FOR URINALS INCLUDING FIXING 5 NOS. OF WATER STORAGE TANKS and SUBMERSIBLE PUMP AT MNI, AZADPUR

Amount

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 25 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 20 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 25 mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 20 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 25 mm nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore.

Providing, Supply and fixing AMITEX GRP Hot Compressed Moulding SMC (Sheet Moulding Compound) tanks. The tank shall be assembled/constructed using GRP/SMC panel of 1 m x 1m, 1 m x 2 m or 1m x 0.5m panel as per site requirement. The root of hte tank should have panel of size 1m x 1m or as per site requirement. one manhole should be provided on the roof of the tank with double lip construction and proper locking arrangemnt. The panel should withstand Hydro static Pressure of at least 4 times the working load and should be provided with HDG nut bolts/washers; EPDM foam gasket cover washer, cleats, including air vents, PVC support of 110 mm dia for the roof top panels. The tank should have ladders inside and outside above 1m (h), provision, provision of inlet / outlet / overflow / drain with all fittings etc. complete job. Capacity 5000 Ltrs

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Providing and fixing solenoid value with timer etc. complete approved make and quality . 25 mm dia nominal bore

Welding by gas or electric plant including transportation of plant at site etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 32 mm dia nominal bore

Providing and fixing 1.5 HP crompton submersible pump including lowering with panel etc. complete. 2.5 mm thick cable wiring heavy duty as per direction of Engineer-In-charge.

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Recovery of dismantled steel (item no. 1) etc. complete dismantled steel will be carried by the contractor as per direction of Engineer In-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 10 km. initial lead, for all leads including all lifts involved.

AMIT ASSOCIATES