PROVISION OF STORAGE SHED AT BLDG NO P 01 AND PROVN OF 06 X SPLIT AC FOR OR INSTITUTE ORI AND COMN COMPLEX AT ENTITY B 61 WEU ARMY CAMP HIRANKUDNA UNDER GE NORTH DELHI CANTT 10

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil etc complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed.

Removing excavated material n. exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M&L PCC 1:4:8 type D-2, (using 40mm graded crushed stone aggregate) as in foundations, fillings and mass concrete complete all as specified & directed.

M&L for RCC M-25 (using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc basement slab, under-reamed piles and mass concrete etc complete all as specified & directed.

M&L for RCC M-25 (using 20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts etc complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement complete all as specified & directed.

M&L for applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified & directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified & directed.

S&F Pre-Painted galvantume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws any size complete all as specified & directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws any size complete all as specified.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer including preparation of new steel or iron surfaces exc 10cm width or girth, complete all as specified and directed.

M&L hardcore of broken stone or boulders of gauge exc. 63mm but n exc 100mm, deposited,spread and levelled in layers n exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in sub base complete all as specified & directed.

S&F plate (plain or chequrred) channel square cut or notched forming holes without any attachment Fe-290 (Gde E-165) complete all as specified & directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n. exc 5cm long complete all as specified and directed.

Supply and fixing of aluminium door powder coated of extrusion aluminium section, consisting of frame vertical and horizontal members of size 100mm x 45mm x 2.5mm thick with shutter style 85mm x 45mm x 2.50mm thick, Top, middle and bottom rail of size 101.60mm x 44.50 and meeting style 47.50mm x 44.50mm thick with 5.50mm thick tinted sheet glass of modi guard/Atul or 6mm this aluminium board with aluminium bedding and rubber gasket/beading including fixing of hydraulic floor spring one in single leaf or two nos in double leaf door of Make Kelvin/Evershine. One mortice lock for aluminium door (each) and two aluminium tower bolts for each door with suitable door handle ornament type with hinges 100mm long complete . Fixed with rawl plug including rectification of floor/wall to match the existing surfaces all as specified and as directed by Engineer-in-Charge at site.

Supply and fix aluminum powder coated three track sliding window with frame and two no's glazed shutter and one no's gauzed shutter with or without sash bar, locking rails, locking arrangements with frames including necessary joinery, cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws, suitable handle, tower bolt, hinges and glazing of 5.5mm thick size. Size of top rail, bottom rail shall be 44.45mm x 44.45mm and size of frame shall be 65mm x 44.45mm and thickness of aluminum 2.50mm thick complete all as specified in MES SSR-1991, Part-I complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls build in cement mortar 1:4 complete all as specified and as directed.

S&F moorum/red bajri filling in floors or pavings, laid in layers n exc. 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for non skid ceramic tiles of size 400mm x 400mm x 7mm thick as in floors set and jointed in neat cement slurry and painted with colour cement to match over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for glazed ceramic tiles of size 300mm x 450mm x 7mm thick, as in vertical surfaces such as skirting & dados set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat of 10mm thick CM 1:4 on brick masonry/concrete surfaces finished even to receive tiles complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement complete all as specified & directed.

Supply and fixing LED flood light 150 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. and all accessories complete, arrangements for mounting of fitting i.e. bracket, clamps, nuts, bolts and washers etc all as per site requirement including connecting up with provision of PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 50mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40mm x 5 mm flat iron clamps, nuts, bolts & washers complete all as specified and directed.

M&L for sub main wiring with 06 Sqmm nominal cross sectional area, two run single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of 25mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified & directed, Note:- Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length.

All as per the description of srl item No 31 above but for 02 x 2.5 Sqmm for phase & neutral and 01 x 2.5 Sqmm for continuous earth wire complete all as specified and directed.

S&F sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated copper bus bar and sheet metal enclosure double door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed.

S&F sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 415 volts, 04 ways with 200 Amps rated copper bus bar and metal double door suitable for MCCB 125 amps as incomer and MCB SP as outgoing along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed. Note :- MCCB & MCB SP will be measured and paid seperately

S&F MCCB 125 amps, 4 Pole, 415 volt, AC, fixed type, with breaking capacity 16 KA suitable for load line/ VTPN DB & connection complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning by using suitable copper lugs complete:-

SP 5 To 32 AMP

SPN 40 to 63 AMP

Supply and laying in trenches or fix on pole / wall , passing through pipes etc., LT UG cable, 1100 volts grade, XLPE insulated, sheathed with multi stranded aluminum conductors, armoured with galvanised steel wire or tape , confirming to IS specifications, of 16sqmm, 4 core all as specified and as directed

Sand cushioning to under ground cable with a layer of sand 8 cm before laying the cable and 15cm after laying the cable (10 cm punned thickness above the top of the upper most cable, total 18 cm), complete all as specified and directed.

Sub class ‘B bricks, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to the length of the brick, complete all as specified and as directed

Supply and fixing 40mm dia GI tubing medium grade ISI marked laid in trenches / laid under floor for protection of cable including all fittings such as elbow, bends, etc and short length complete all as specified and directed.

M&L for earthing complete with galvanised mild steel earth plate electrode 60cm x 60cm x 6mm thick buried vertically in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR Part-I (2009) and connecting to main switch board/ main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit/ chamber in PCC 1:3:6 type C1, angle iron 40mm x 40mm x 3mm frame for pit cover including testing on completion complete all as specified & directed. Note:- On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.

Supply and installation of split unit Air conditioner 1.5 TR capacity ,indoor and outdoor unit complete with cordless remote control with in built air ioniser and plasma filter for better indoor air quality with 5 star rating, inverter technology, energy efficient rating, copper condensor coil, wall mounting brackets (indoor and outdoor), refrigerant 32/410a type, including necessary all connections complete all as specified and directed.

S&F sheet metal enclosure with single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 'C' curve, 240 Volt complete all as specified and directed.

S&F voltage stabilizer for automatic operation, single phase naturally air cooled, indoor wall mounted type, fully elecronic controlled & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5 % and of capacity 4.0 KVA complete all as specified and directed.

MOHIT ENTERPRISES

M/s SAAR ENGINEERS

M/S ANIL KUMAR

CUCKOO ENTERPRISES

M/S SHARMA ASSOCIATES

The new hut furnitures

M/S HARINDER SINGH

M/S GEETANJALI ENTERPRISES

jay maa engineers