SPECIAL REPAIR/REPLACEMENT OF FURNITURE AGAINST BER AT HQ EAC (U) AF UNDER GE (I) AF SHILLONG

Almiarh large steel with shelves Drawing No FD-1031 Overall size shall be 1985mm high,920mm wide and 485mm deep. The base shall be made of two numbers mild steel sheet channel bases made in U shaped with ends covered . Mild steel sheet shall be 1mm thick. The base channel shall be welded at 50mm from each end of the length of 920mm and shall be up to full width of 485mm and shall be 100mm high Top, sides bottom and back of almirah shall be of 1mm thick mild steel sheet . Four shelves equally spaced of 1mm thick mild steel sheet shall be provided to make five compartments.Front shutter shall two leaves of equal size .Front shutter leaves shall have three butt hinges of 75mm fixed to each shutter and shall be side hung. All joints and welding and fixing shall be done in accordance with the standard workmanship. One chromium plated steel handle with a locking device shall be provided as shown on drawing .The locking device shall be three way locking device and shall also be provided with decorative key plate . Make of Lock-Harrison/Godrej/Mowjee All steel surfaces exposed to view when placed in position shall be painted with two coats of silver grey hammer paint internally and extrenally with spray machine after preparation of surfaces.A mark of MES shall also be provided on top left corner of front shutter with visible colour. Painting shall be done with spray machine.Rest all as per drg.

Almirah medium steel with shelves Drawing No FD-1032 Overall size shall be 1270mm high,765mm wide and 440mm deep.The base shall be made of two numbers mild steel sheet channel base welded to bottom of almirah and shall be 100mm high. Mild steel sheet shall be 1mm thick for channel base. The base channel shall be welded at 50mm from each end of 765mm length and shall be up to full width of 440mm of almirah. Top, sides, back, bottom and front of almirah shall be of 1mm thick mild steel sheet. Three shelves equally spaced making four compartments shall be provided and shall be of 1mm thick mild steel sheet.Front shutters shall have two leaves.All joints and welding, fixing shall be done according standard workmanship. A steel chromium plated handle 100mm long shall be provided to the shutter.The locking device shall be three way locking device and shall also be provided with decorative key plate . Make of Lock-Harrison/Godrej/Mowjee All steel surfaces exposed to view when placed in position shall be painted with two coats of green hammerpaint over a coat of primer with spray machine after preparation of surfaces. A mark of MES shall also be provided on left top corner of front shutter of visisble colour as directed by Engr-In -Charge.Rest all as per drgs

Bin Linen Multipurpose Drawing No FD/E6/MAP/09 The overall size of the bin linen multipurpose is 1200mm long x 450mm wide x 750mm high DESCRIPTION: (a) It shall be made of BWR plywood of grade - A of thickness as specified in drg; in lieu of prelaminated particle board. (b) 1mm thick laminated sheet shall be pasted on all exterior surface with marine grade adhesive including 6mm thick teak wood beading shall be provided alround the edges of shutters and drawers. c) Each drawer shall be provided with 2 x Nos of 12 inch long stainless steel telescopic channels. (d) Irrespective of what is shown on drg,the base of bin linen multipurpose shall be of size 1200mm long x 450mm wide x 75mm high, made of 1st class teak wood scantling 30mm thick. The bottom frame shall have four nos of 25mmx25mm stiffeners placed and fitted at equidistant positions inside the base frame. All wood to be used shall be 1st class hard teak wood. The base frame shall be fixed with 85mm long screws fitted from the bottom. (e) Drawer and shutter shall be provided with 100mm long 8mm dia chrome plated handles. (f) Shutter to be provided with magnetic catchers at inside. Rest all specifications and dimensions are as per drg. FINISH: All unlaminated plywood surface/wooden surface shall be polished in mat melamine finish of walnut shade..

Chair Computer Drawing No FD/E6/MAP/01 The Base pedestal assembly of chair computer shall be of dia 700mm .The pedestal assembly shall be provided with injection molded in black 30% glass filled nylon. A 10.5mm dia forged bright Zinc plated MS Castor Pin is of pressfitted into each prong for holding the castors. The seat and back of the chair computer shall be made of 12mm thick hot pressed plywood upholstered with Leatherette and moulded polyurethane foam. The back form shall be designed with contour lumber support for extra comfort with PVC lipping allround.The back rest shall be adjustable and consist of drop lift mechanism and shall be adjusted in the insert .It shall be scratch and weather resistant. Rest all as per drg and as per sample approved

Chair Dining (Offrs) Drawing No FD/MAP-II/04 Overall size shall be 950mm high,450mm wide and 450mm deep.The size of the legs shall be 40x50mm .Front and side rails shall be of size 25x65mm.Stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg..75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of approved foam(Kurlon/sleepwell) covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.Side frame of back of the chair shall be of section 40x50mm..Four teak wood vertical stiffeners of section 20x30mm shall be fixed in back of chair. 25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.The curved teak wood back shall be of section 30x45mm.All sizes shall be taken as stated in specification, irrespective of what is shown on drg. Timber species shall of super group as per IS 287:1993 with permissible moisture content. All wood surfaces shall be lacquer polished with high gloss finish of walnut shade.Rest all as per drg.

Table steel 900x900x760mm Drawing No FD-1009 DIMENSION:Overall size shall be 900mm long,900mm wide and 760mm high. DESCRIPTION:Steel frame shall be of 800 mm X800mm X742mm . Four legs shall be of 25mm square mild steel tube of wall thickness 1.6mm. Legs shall be joined together with the top rails of 25mm square mild steel tube of thickness 1.6mm. Top of the table shall be of 18mm thick pre-laminated MDF board and provided with 4mm teak wood edging all round the top of table. Hard rubber/PVC toes shall be provided to bottom of legs. FINISH: All steel surfaces exposed to view when placed in position shall be painted with two coats of silver grey hammer paint internally and extrenally with spray machine after preparation of surfaces.A mark of MES shall also be provided on top left corner of front shutter with visible colour. Painting shall be done with spray machine.Rest all as per drg.

Chair Verandah Drawing No FD-359 DIMENSION:The overall size of the chair shall not be less than 460mm wide,600mm deep and 355mm high jupto seat from ground level and over all height 760 mm DESCRIPTION: (a) The frame of the chair verandah shall be made up of 20mm dia conduit pipe of wall thickness 1.6mm. (b) Seat and back of the chair shall be woven with virgin plastic cane 4mm wide and 0.6 mm thick half round in mat pattern or as directed by Engineer-in-charge. (c) PVC hard rubber toes shall be provided to each leg of chair verandah. Rest all specifications and dimensions are as per drg FINISH:-The chair shall be dry powder coated in white after preparation of surface .

Chair Visitor-TP Make/ Model-Godrej Interio Bravo / GEEKEN GP-178 / Methodex Vogue Type: Mid-Back Visitor Chair Armrest: Fixed loop arms Material: Fabric upholstery with a sturdy frame Weight- 13.75 Kgs

Table computer -TP Model & Brand: Godrej Companion C9 (Ind) / GEEKEN computer desk2 / Methodex VISION-13 Dimensions: 90 X 75 x 50 cm Material: Engineered Wood Color/Finish: Remini Walnut Weight: 21 kg

Chair dining JCO/Ors Drawing No FD/MAP-II/05 Overall size shall be 890mm high, 440mm wide and 430mm deep. The size of the legs shall be 30x55mm .Front and side rails shall be of size 30x65mm.Stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg.One stiffener of size 40mmx40mm shall be fixed in between the two opp rails of the seat for providing extra support to PVC seat. PVC seat 4mm thick of PPCP material and weight not less than 0.50 kgs with perforated holes shall be fixed inside the frame of seat with proper screws. The height of the seat shall be at 460mm high from ground. The size of the teak wood back shall be 45x15mm made out of 45x35mm section.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.Timber species shall of super group as per IS 287:1993 with permissible moisture content. All wood surfaces shall be lacquer polished with high gloss finish of natural shade. Rest all as per drawing.