Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.4 LAccepted-AOC NO 1055 MAIN ROAD ODIAMPET VILLIANUR PUDUCHERRY 605110 | CUDDALORE | TAMIL NADU | 605110 | L1 | Accepted-AOC work order is issued to L1 | |
| 2 | L2₹10.8 L+₹40,857.90 (3.94%)Rejected-Finance KARAIKAL | KARAIKAL | PUDUCHERRY | 609601 | L2 | Rejected-Finance As per the chart generated the L2 is rejected | |
| 3 | L3₹10.8 L+₹48,310 (4.66%)Rejected-Finance | L3 | Rejected-Finance As per the chart generated the L3 is rejected |
Tender Value
₹12.7 L
EMD Value
₹25,337
Closing Date
30 Jan 2024, 4:00 pmClosed
EE/ Electrical, IGMCRI
Office of the Executive Engineer/Electrical, IGMCRI, Kathirkamam, Puducherry
Supply and laying of LT UG cables including 2 nos of distribution pillar boxes from College block ground floor panel room to the borewell pump-I in IGMCRI campus
2024_MH_14876_1
20/IGMCRI/EC/EEE/23-24
Open Tender
Electrical Works
Item Rate
60 days
IGMCRI, Kathirkamam
Please Refer Tender Documents
4 documents required · 4 mandatory
₹525
₹25,337
13 Sept 2024
24 Jan 2024
31 Jan 2024
24 Jan 2024
30 Jan 2024
24 Jan 2024
Amount
Supplying of 3.5 x 240 Sqmm PVC armoured aluminum U.G.Cable - 1.1KV grade at site. Make: Polycab/Finolex/Havells.
Supplying of 4 x 50 Sqmm armoured aluminum U.G.Cable - 1.1KV grade at site. Make: Polycab/Finolex/Havells.
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc.as required - above 185 sq.mm and upto 400 sq.mm
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required - above 185 sq.mm and upto 400 sq.mm (clamped with 40x3mm MS flat clamp)
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required - above 35 sq.mm and upto 95 sq.mm (clamped with 25x3mm MS flat clamp)
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 3 1/2 X240 sq.mm (62 mm)
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 4 X50 sq.mm (35 mm)
Supply of 630A, 400V, 8 Way Distribution pillar box with 14 SWG CRCA sheet and HRC fuses on required bus bars and neutral bus bar made up of electrical grade aluminium and separate galvanized copper earthing flats and other features as per PED specifications.
Erection of Distribution/ SS pillar on MS channel including provision of pillar plinth
Making earth pit of GI pipe for earthing in earth pit with 40mm dia GI pipe medium class of length 3.05m perforated with 46 Nos. of 12mm dia holes pipe lowered in bore holes of 150mm dia and filled in with charcoal and salt in alternative layer of 300mm , the top of GI pipe shall be clamped. Earth pit shall be provided with 60cm dia precast ring with 60cm depth alround, covered with RCC precast slab etc as per I.E standards.
Providing and fixing 25 mm x 5 mm G.I.strip on surface or in recess for connections etc.as required
Supply and laying of 150mm dia GI pipe (medium class)
Supply and laying of 140mm dia PVC pipe
Supply, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses connections, earthing etc. as required - 630A TPN.
M/S. VENUS ELECTRICAL WORKS
Srinivasa Electricals and Contractors
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .