ELECTRICAL WORK

Amount

Dismentaling of 30 mtr long high mast light with the help of crane/hydra at least 65 feet long bottom, separate it into three pieces dismentaling of their operating mechanism steel rope, lantren carriage and all other accessories.

Shifting of 30 mtr long high mast light and their all material from one place to other place at 220 KV S/S Sikandrabad as directed by engineer incharge by suitable crane/hydra.

Making of foundation at new place in switch yard for erection of 30 mtr long high mast light (as per drawing and technical specification) including providing of proper size, length and quantity GI foundation Anchor bolt and nuts.

Fixing of 30 mtr long high mast light having three section of size 10.5 mtr long. The high mast light consists following items as per drawing and specificaiton. (i) Fitting of door panel on bottom of pole of size 1000x250 mm having allen key locking arrangement and wooden stack board inside. (ii) Providing and fixing of anchor bolt of size 840x32 mm. (iii) Providing and fixing of anchor bolt plate of size 840 mm and 06 mm thick (iv) Providing and fixing of anchor bolt plate of size 840 mm and 04 mm thick. (v) Fitting winch having double drum with the capacity of 750 Kg. (vi) Fitting stainless steel 7/19 wire rope of 06 mm dia. (vii) Fitting of trailing cable flexible cupper multistrand of size 2.5 mm sqr.

Fixing of 3 Phase AC cubical box of size 450x450x200 mm of MS sheet 16 SWG duly painted with synthetic enamel paint. Box should be fixed with proper grouting. The box should be consist of cable gland duly fitted with in gland fixed on the bottom of cubical box with proper locking arrangement.

Laying of 3 and 1/2 core 95/50/35 mm sqr LT power cable or equvelent control cable suitable for loading of high mast light size 500 mm below of ground level after excavation with first class brick and rever sand along with the back filling. The work involves both side termination of cabloe with crimping of lugs including all labour and T&P (Only cable provided by department)

Providing and fixing of steel cealing rope of size 10 mm inside the hight mast lingt pole.

Providing and fixing of single pully inside the top of high mast light pole.

Repairing of 400 watt HPSW light fixing after attending their circuit fault and replacement with providing of their defective choke ballast/lamp/condenser and ingniter etc after lower doen of light ring and re erract after complete the work on 03 Nos. 30 mtr long high mast light.

TIRUPATI ELECTRICALS

JAGAT ELECTRICAL & FABRICATORS