Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹1.2 L
Closing Date
21 Oct 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EXECUTIVE ENGINEER
ROHTAK W/S DIVISION
Supply, erection and commissioning of Pumps, Motors along with allied materials at permanent Pump House at RD 8000 (Sanghi-I Pump House) of Sanghi Minor.
2026_HRY_552866_3
16951-72/5AC dt. 07/10/2026
Open Tender
Pumps/Motors
Supply
90 days
ROHTAK
Please refer Tender documents.
3 documents required · 3 mandatory
₹5,000
₹1.2 L
Yes
8 Oct 2026
8 Oct 2026
22 Oct 2026
8 Oct 2026
21 Oct 2026
8 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply, Erection & Commissioning of 5 C/s axial Flow Water lubricated Vertical Pump of 5 Cs. Discharge at 1440 RPM having lift of approx 15 feet with Y body, including Strainer, Syphon Breaker valve with mouth bend, MS Bend with both ends flanged, SS/HT Nut & Bolts etc. alongwith supply & replacement of MS girder of suitable size complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department. (Ref. SPC 17.02.2026) | 3 | No. | - | - |
| 2 | Supply, Erection & Commissioning of solid shaft Motor of capacity 30 HP, 1440 rpm, 3 Phase, 380 Volt+- 10%, with eficiency class IE2 (with compatible 3 Phase Submersible Cu cable from motor to panel/starter) suitable for fitment with 5 Cs. V.T axial/mix flow pump type vertical flange mounted as per approved specifications of the department. (Ref. SPC 17.02.2026) | 3 | No. | - | - |
| 3 | Supply, Erection & Commissioning of fully automatic Star Delta Starter of cap. 150 Amp (IP-67) Including all accessories as one incomer of MCCB (150Amp) with 1 No MCB for lighting load, Contactor rating 120 Amp, 90 Amp, 70 Amp with control transformer for control supply, outgoing indicator, having MPR & all types of protections i.e.UV/OV/ over current, phase imbalance/phase reversal protection, locked rotor, dry run etc, Digital meters, Push buttons, bus bars, capacitor bank, separate relay for single Phase protection etc. & with compatible 3 Phase Submersible Cu cable from motor to panel/starter & suitable size 3 Phase Al cable incomer from main switch to starter panel complete in all respect suitable for open fields operation of 1 No. Motor of capacity of 30 HP with a stand of MS channel having suitable operating height as per site & approved specifications of the department. (suitable for voltage range 380 +- 10%,) (Ref. SPC 17.02.2026) | 3 | No. | - | - |
| 4 | Supply, erection and commissioning of 3.5 core 185 sqmm Armoured PVC aluminium power Cables, grade as per IS 7098-1985 as per approved makes and other allied material completed in all respect. (Ref. HPPC 22.01.2025) | 100 | Mtr | - | - |
| 5 | Providing & fixing of Lightening Arrester with protection radius of 50 mtr aling with earthing arrrangement as per proper specifications for pump house building and tranformer complete in all respect as per site requirement. (Ref. HPPC 23.06.2026) | 1 | Job | - | - |
| 6 | SITC 4 pole on load manual change over switch in SS enclosure of 100A, 415V (HSR 23.22.8.2) | 1 | No. | - | - |
| 7 | Supply, Erection & Commissioning of MS Components duly primer & bituminous paint inside & outside with all civil work (A) MS Grating of size 40x40x6 mm & MS Flat 40x5 mm (B) Trash rack of size as per actual site requirement MS Trash rack should be made by MS angle 50x50x6 mm & MS Flat 50x6 mm as per site condition (Complete in all respect including the civil work as per site condition/requirements) (Ref. HPPC 22.01.2025) | 950 | KG | - | - |
| 8 | Providing & fixing of chemical earthing by digging suitable bore and depth pit for LT Panels complete with copper electrode, copper strip for all panels complete in all respect as per site requirement. (Ref. HPPC 23.06.2026) | 1 | Job | - | - |
| 9 | Supply, Erection & Commissioning of M.S delivery Pipe 258.9 mm inner dia. made of MS Plate both end flanged (in >= 6 Mtr Pieces) as per approved specification & Make. (Including SS Nut & Bolt, Rubber Sheet 1/8" & other fitment accessory required) (Ref. SPC 17.02.2026) | 45 | Mtr | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.75 MB
BOQ_632748.xls
BOQ • 0.32 MB
BID_3.pdf
Additional Documents • 3.35 MB
CORRI.pdf
PDF • 0.75 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .