GE 861 EWS-50(T)/2025-26

Amount

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete in ground floor and paving n. exe 15 cm thick below or above GL complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store/credit complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frame with shutters (without taking shutter from the frame) exceeding 1.5sqm and not exceeding 4.00 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n. exe 1.50 Sqm each complete all as specified and directed by Engineer-in-Charge.

Demolition of brick or stone masonry built in cement mortar including all necessary arches quoins etc complete all as specified and directed by Engineer-in-Charge.

Material and labour brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L for 2nd class soft wood, plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.

Supply and fixed 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (internal sash bars) edges of framing plane, chamfered or rounded fitted and mitred beads for securing glass etc size of members as specified in SSR Part-I Section 8 clause 8.24(a) (kail) complete all as specified and directed by Engineer-in-Charge.

S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm single side pre-laminated PVC sheet reinforced with MS square tube manufactured as per SSR Part-I specifications and drawings complete all as specified and directed by Engineer-in-Charge.

S&F factory made solid panelled PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and gap insert for top rail and bottom rail panelling of plain colour PVC to sheet to be fitted in the MS frame welded / sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed by Engineer-in-Charge.

S&F aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed by Engineer-in-Charge.

S&F aluminium anodised barrel tower bolts extruded section of size 200 mm, complete all as specified and directed by Engineer-in-Charge.

S&F aluminium handle extruded febricated type anodised of size 150 mm complete all as specified and directed by Engineer-in-Charge.

S&F butt hinges 100mm medium weight cold rolled mild steel complete all as specified and directed by Engineer-in-Charge.

S&F mild steel ordinary rat rail rod pattern spring including roller and roller plate, 300mm complete all as specified and directed by Engineer-in-Charge.

M&L for 25 mm th PCC (1:2:4) type B0 using 12.5 mm graded crushed stone aggregate as in floor finishes etc complete all as specified and directed by Engineer-in-Charge.

M&L for Non skid ceramic coloured joint free tiles 7 to 8mm thick (square/ rectangular), area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement mortar screed bed 15 mm thick in cement mortar (1:6) laying floor finish complete all as specified and directed by Engineer-in-Charge.

M&L for Coloured glazed ceramic tiles in vertical surfaces 450 x 300 x 7 mm thick set over and including 10mm thick backing coat in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

Dismantling water storage tanks of any description, n. exc 500 litres capacity and removing from site complete all as specified and directed by Engineer-in-Charge.

S&F for Rotational moulded polyethylene 500 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20 mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connections of flush pipe to squat pattern closet including lime concrete bedding and all joint making good to the floor complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (min), with grating and union for discharge pipe including flush pipe & waste pipe) complete all as specified and directed by Engineer-in-Charge.

S&F & repairs stainless steel grating, 125mm dia complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC valveless 10 litre capacity syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Vitreous china wash hand basin, white, flat back, size 550 x 400 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. (Including S&F of 15mm bore CP pillar tap, waste coupling and 32mm dia PVC waste pipe) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15 mm size PVC connection with PTMT nuts of 600 mm long complete all as specified and directed by Engineer-in-Charge.

S&F in repairs swivel shower of PTMT any colour with arm, 195 mm long with bend of 45 degree with flange (both min wt 80 gms) complete all as specified and directed by Engineer-in-Charge.

S&F 100mm dia cast iron sanitary connection for WC outlet complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 75 mm dia CI floor trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 using 20mm graded crushed stone aggregate complete all as specified and directed by Engineer-in-Charge.

S&F cast iron Nahani trap 75 mm dia including jointing to pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15 mm bore fancy type CP bib taps cast copper alloy with crutch or butterfly handle, screwed down for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, 15 mm bore CP angle valve cast copper alloy screwed down, high pressure with crutch or butterfly handle fancy type complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, 15 mm bore Stop valves, cast copper alloy with long shank and cup (concealed type) cast copper alloy screwed down , high pressure fancy type complete all as specified and directed by Engineer-in-Charge.

Taking up or down 15mm bore GI Tubing and connections including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge.

Taking up or down 20 mm bore GI Tubing and connections including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge.

S&F 15 mm bore GI tubing medium grade galvanised with all fittings and fixed complete to walls & floors etc complete all as specified and directed by Engineer-in-Charge.

S&F 20 mm bore GI tubing medium grade galvanised with all fittings and fixed complete to walls & floors etc complete all as specified and directed by Engineer-in-Charge.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/ floor complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) bends, 110mm dia, any radius complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) bends, 75mm dia, any radius complete all as specified and directed by Engineer-in-Charge.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge.

S&F 75mm PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge.

M&L for 75 mm thick PCC ( 1:3:6) type C-2 using 40mm graded crushed stone aggregate as in plinth protection etc finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick on fair face of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10 mm thick in cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for preparing plastered or un plastered new surfaces of walls and applying three coats of white wash on walls complete all as specified and directed by Engineer-in-Charge.

M&L for preparing plastered or un plastered new surface of walls and applying two coats of Cement base paint on walls (External) complete all as specified and directed by Engineer-in-Charge.

M&L for two coats of synthetic enamel paint on new wooden surfaces over a coat of pink primer including preparation of surfaces, over 10cm width or girth complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 20 mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe & fixed.

M&L for preparation of plastered or plastered old surface of walls and applying two coats of cement base paint on walls (externally) including removal of existing treatment complete all as specified and directed by Engineer-in-Charge.

M&L for precast cement concrete, type B0 1:2:4 (using 12.5 mm graded crushed stone aggregate) in louvers and jallies, 40 mm thick (measured solid) including all moulding, complete set in cement mortar (1:4) on wall etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated CGI Sheet surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint (in camouflage/plain pattern) complete all as specified and directed by Engineer-in-Charge.

S&F mild steel work in roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by Engineer-in-Charge.

S&F mild steel plates/flats, angle etc as in cleat gusset plate including drilling welding etc complete all as specified and directed by Engineer-in-Charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

M&L for 100 mm thick PCC 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed by Engineer-in-Charge.

M&L for chequered cement concrete tiles glossy finished 30cm x30cmx25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete including fittings such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in cement mortar 1:3 etc complete all as specified and directed by Engineer-in-Charge.

M & L for point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLS PVC insulated multi-stranded unsheathed copper conductor, drawn in PVC casing & capping and including pipe hooks , elbows, junction covers and junction boxes, after fixing or cutting on wall chasing for conduits and sinkings for sunken cast iron/ pressed steel terminal boxes 60mm deep, suitable length and thickness for mounting, switches, sockets, fan regulator with 3 mm thick plastic laminated sheet cover fixed with brass screwed and cup washers, duly fixed on wall or grouting and painted with red oxide metal primer and making the good disturbed surfaces of wall in cement mortar 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly complete all as specified and directed by Engineer-in-Charge.

All as per srl item No-67 here in above but for one 3 pin 5A socket outlet on independent controlled by one switch complete all as specified and directed by Engineer-in-Charge.

S&F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer-in-Charge.

S&F for Switch Socket combination 2 in 1, 5 Amps flush type, 230 volts complete all as specified and directed by Engineer-in-Charge.

S&F ceiling rose surface bakelite three terminals complete all as specified and directed by Engineer-in-Charge.

S&F LED light fitting 1x20W, 230V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge.

S&F lamp holder insulated body with back plate for batten fittings complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of LED 9 watt pin type bulb complete all as specified and directed by Engineer-in-Charge.

S&F LED lights fitting 1x10W, bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge.

S&F energy saving exhaust fan 300 mm sweep sturdy engineering plastic complete with lovers shutters, voltage 230V, 50Hz, RPM 1200, copper winding making hole in wall as required and, connecting electrically to ceiling rose or connector block using PVC insulated and overall sheathed 3 core cable of size 0.75 Sqmm with flexible copper conductor complete all as specified and directed by Engineer-in-Charge.

Supply and laying in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular twin core 10 sq. mm complete all as specified and directed by Engineer-in-Charge.

S&F laying in trenches, pole, and along wall etc complete, XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor,1100 volt grade, cross sectional area 10 sq mm 2 core complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches in n. exc 1.5 mtr vide and 1.5 mtr in depth and getting out in soft/loose soil for laying of U/G cable complete all as specified and directed by Engineer-in-Charge.

Returning filling in including spreading levelling watering and well ramming in layers in soil complete all as specified and directed by Engineer-in-Charge.

Removing of surplus excavated material to a distance n. exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr from the starting point complete all as specified and directed by Engineer-in-Charge.

M&L for sand cushioning in trenches for cable protection 8 cms below cable and 15cms above cable complete all as specified and directed by Engineer-in-Charge. Note: punned thickness of 18cms shall be measured and paid.

M&L for bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' bricks, old size, laid across the cable complete all as specified and directed by Engineer-in-Charge.

S&F 40 mm bore GI water tubing medium grade (ISI marked) laid in trenches including fittings as required at site and including jointing complete all as specified and directed by Engineer-in-Charge.

S&F sheet metal enclosure MCB distribution board, double door with IP -43 protection single phase 240 volts 4 way,including suitable size copper bus bar and neutral link fixed flush in wall including cutting chases in wall for fixing DB and making good disturbed wall surfaces to match with existing specification complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement MCB SPN, 240 volts any rating from 40-63 amps, with rupturing capacity 10 KA, including providing thimble for outgoing cables complete all as specified and directed by Engineer-in-Charge.

M&L for MCB single pole 240 volts 5 to 32 amps as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), disconnecting upper and lower terminals, integrated label holder to ensure circuit identification complete all as specified and directed by Engineer-in-Charge.

Material & labour for earthing complete with galvanised cast iron earth plate electrode of size 600x600x6.0mm thick buried directly in ground not less than 3.0m deep below normal ground level as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI strip 32x6 mm dia as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shora all around the earth plate, earth work in any type of soil and removing remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or complete all as specified and directed by Engineer-in-Charge and including testing on completion. (i) Main earthing lead from earth plate electrode to test point up to length of 7.5 meters length shall be deemed to be included in the unit rate quoted against this item . (ii) GI protection pipe & earthing lead beyond 7.5 meter shall be measured and paid for separately under appropriate item. iii) On testing after completion if the desired resistance is not obtained the contractor shall redo the earthing without any extra cost to the department .

M/S NEW IQBAL ENTERPRISES (BID ID -3485731)

M/S SHEIKH FEROOZ AHMAD (BID ID -3483237)

M/S A.N CONSTRUCTIONs (BID ID -3482172)