Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.4 LAccepted-Finance | 1 | Accepted-Finance Eligible | |
| 2 | 2₹2.7 L+₹32,100 (13.5%)Accepted-Finance | 2 | Accepted-Finance Eligible | |
| 3 | 3₹4.4 L+₹2.0 L (85.6%)Accepted-Finance BYE PASS N H NEAR STATE BANK OF INDIA SIDHRA JAMMU | 3 | Accepted-Finance Eligible |
| Sl No | Description | Qty | Unit | BARI LAL L2 | JAI GURUJI ELECTRICAL AND MECHANICAL WORKS L1 | GS ENGG WORKS L3 |
|---|---|---|---|---|---|---|
| 1.00 | Servicing/greasing of winch machines of summer regulatory gates by way of disassembling/opening the gear box. Cleaning the whole gear box with K. Oil at site with the help iron brush and then applying of sufficient amount of grease to each gear. Opening the covers of rope hoist drums and cleaning of drums by applying k. oil and then cleaning the rope hoist drums with help of iron wire brush and then applying the grease to both drums. Opening the side cover plates of 02 no. bearings, removing the old grease / dust from both the bearings, cleaning the bearings with recommended chemical cleaner and applying new grease to both the bearings and then fitting of the cover plates of the bearings. Complete painting of the winch machines and its top covers etc. by applying enamel paint. Complete job including cost of material, labour and hire charges of tools and tackles required during the execution of the job etc. | 3 | Job | 0 ₹1,80,000 | 0 ₹66,000 Lowest | 2,172 ₹1,06,428 |
| 2.00 | Providing and fitting of new pedestal bearing assembly as per site conditions in place of old worn out/damaged ones. | 3 | Job | 0 ₹60,000 | 0 ₹31,800 Lowest | 2,220 ₹1,08,780 |
| 3.00 | Gate (D-1):-
Restoration / Strengthening / Replacement of components of the gate of size 4’ x 2’6” by way of gas cutting of old rusted bottom channel of size 3” x 1.5’’. Repairs to 3T winch machine by way of providing / fixing of new machined stem rod and rain pipe, replacement of internal gear system. Replacement of the fasteners, re-installation of the gate inside the groove after complete reconditioning. Providing / laying of cement concrete for anchoring of the gate top channels for securing it properly. Complete painting of the entire gate at site with enamel paint. | 1 | Job | 0 ₹5,000 Lowest | 0 ₹16,750 | 742 ₹36,358 |
| 4.00 | Gate on RD 889:
Extraction of the gate of size 5’ x 3’ outside the frame using chain pulley block, tripod stand & manual labour, for restoration / strengthening / reconditioning. Repairs of the gate by way of p/f of new winch machine of (3T) capacity Installation at site. stem rod, gears, bearing to 3T winch machine. Re-installation of the gate inside the groove, greasing, complete painting of the structure by scrubbing, removal of dust, then applying 2 coats of red oxide paint & 2 coats of anticorrosive enamel. Assembly at site with new winch machine and checking operation. Complete job involving material cost, labour charges for hiring tools & tackles, consumables, chain pulley block & tripod stand, welding equipments (Mobile Gen. Set) Etc at site. | 1 | Job | 0 ₹5,000 Lowest | 0 ₹18,750 | 738 ₹36,162 |
| 5.00 | Gate ( D-3 ):
Repairs to vertical regulatory gate of size 4’.3” x 3’9” by way of p/f of bearing to winch machine of 3Ton capacity along with rain cap and winch machine bottom plate of required size and specification by providing and fixing of new one, duly drilled on all four corners for securing with mounting channels. Complete painting of the entire gate, leaf and winch machine by scrubbing, removal of old rust, then applying two coats of red oxide primer and two coats of anticorrosive enamel paint. Complete job includes cost of material, labour charges(skilled/semiskilled/unskilled), head load, hire charges of tool and tackles, transportation charges, welding equipments (Mobile Gen. Set) Etc. | 1 | Job | 0 ₹5,000 Lowest | 0 ₹22,000 | 745 ₹36,505 |
| 6.00 | Gate on RD 3730:
Restoration of the gate of size 4’.7” x 2’.8” by way of repairs of the gate, p/f of new winch machine of (3T) capacity Installation at site & checking operation. Complete painting of the structure by scrubbing, removal of dust, then applying 2 coats of red oxide paint & 2 coats of anticorrosive enamel. Assembly at site with new winch machine and checking operation. Complete job involving material cost, labour charges for hiring tools & tackles, consumables, chain pulley block & tripod stand, welding equipments(Mobile Genset) etc. | 1 | Job | 0 ₹5,000 Lowest | 0 ₹20,600 | 735 ₹36,015 |
| 7.00 | Gate on RD-4600:
Repairs/Restoration of gate of size 3’ x 2’ by way of providing / fixing of gears and bearings to winch machine of 3Ton capacity as per sample along with rain cap and winch machine bottom plate of required size and specification by providing and fixing of new one, duly drilled on all four corners for securing with mounting channels. Anchoring of the top channels for holding of winch machine with the gate frame and then laying of cement concrete block on the top of both sides of gate to work it properly. Re-installation of the gate inside the groove after repairs. Complete painting of the entire gate, leaf and winch machine by scrubbing, removal of old rust, then applying two coats of red oxide primer and two coats of anticorrosive enamel paint. Complete job includes cost of material, labour charges, hire charges of tools and tackles, transportation charges Etc. | 1 | Job | 0 ₹5,000 Lowest | 0 ₹28,500 | 739 ₹36,211 |
| 8.00 | Gate on RD 5200:-
Repair/Extraction of the gate of size 6’.8” x 3’.4” outside the frame using chain pulley block, tripod stand & manual labour, for p/f of new winch machine of (3T) capacity Installation at site & checking operation. Complete painting of the structure by scrubbing, removal of dust, then applying 2 coats of red oxide paint & 2 coats of anticorrosive enamel. Assembly at site with new winch machine and checking operation. Complete job involving material cost, labour charges for hiring tools & tackles, consumables, chain pulley block & tripod stand, welding equipments. | 1 | Job | 0 ₹5,000 Lowest | 0 ₹33,500 | 740 ₹36,260 |
Tender Value
₹2.4 L
EMD Value
₹4,852
Closing Date
17 Aug 2026, 2:00 pmClosed
Executive Engineer MID Akhnoor/Nowshera
Office of Executive Engineer MID Akhnoor/Nowshera
Repair,Servicing of various components of mechanically operated regulatory summer gates head works of Ranjan canal and various Distributary gates of D1, RD889, D3, RD3730, RD4600 and RD-5200.
2026_IFC_318348_1
MID/AN/34
Open Tender
Machineries/ Mechanical Engg Items
Item Wise
15 days
Ranjan
Please refer Tender documents.
7 documents required · 7 mandatory
₹200
Executive Engineer MID Akhnoor/Nowshera
₹4,852
Yes
Office of Executive Engineer MID Akhnoor/Nowshera
30 Sept 2026
28 Jul 2026
18 Aug 2026
28 Jul 2026
17 Aug 2026
30 Jul 2026
29 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Servicing/greasing of winch machines of summer regulatory gates by way of disassembling/opening the gear box. Cleaning the whole gear box with K. Oil at site with the help iron brush and then applying of sufficient amount of grease to each gear. Opening the covers of rope hoist drums and cleaning of drums by applying k. oil and then cleaning the rope hoist drums with help of iron wire brush and then applying the grease to both drums. Opening the side cover plates of 02 no. bearings, removing the old grease / dust from both the bearings, cleaning the bearings with recommended chemical cleaner and applying new grease to both the bearings and then fitting of the cover plates of the bearings. Complete painting of the winch machines and its top covers etc. by applying enamel paint. Complete job including cost of material, labour and hire charges of tools and tackles required during the execution of the job etc. | 3 | Job | - | - |
| 2 | Providing and fitting of new pedestal bearing assembly as per site conditions in place of old worn out/damaged ones. | 3 | Job | - | - |
| 3 | Gate (D-1):-
Restoration / Strengthening / Replacement of components of the gate of size 4’ x 2’6” by way of gas cutting of old rusted bottom channel of size 3” x 1.5’’. Repairs to 3T winch machine by way of providing / fixing of new machined stem rod and rain pipe, replacement of internal gear system. Replacement of the fasteners, re-installation of the gate inside the groove after complete reconditioning. Providing / laying of cement concrete for anchoring of the gate top channels for securing it properly. Complete painting of the entire gate at site with enamel paint. | 1 | Job | - | - |
| 4 | Gate on RD 889:
Extraction of the gate of size 5’ x 3’ outside the frame using chain pulley block, tripod stand & manual labour, for restoration / strengthening / reconditioning. Repairs of the gate by way of p/f of new winch machine of (3T) capacity Installation at site. stem rod, gears, bearing to 3T winch machine. Re-installation of the gate inside the groove, greasing, complete painting of the structure by scrubbing, removal of dust, then applying 2 coats of red oxide paint & 2 coats of anticorrosive enamel. Assembly at site with new winch machine and checking operation. Complete job involving material cost, labour charges for hiring tools & tackles, consumables, chain pulley block & tripod stand, welding equipments (Mobile Gen. Set) Etc at site. | 1 | Job | - | - |
| 5 | Gate ( D-3 ):
Repairs to vertical regulatory gate of size 4’.3” x 3’9” by way of p/f of bearing to winch machine of 3Ton capacity along with rain cap and winch machine bottom plate of required size and specification by providing and fixing of new one, duly drilled on all four corners for securing with mounting channels. Complete painting of the entire gate, leaf and winch machine by scrubbing, removal of old rust, then applying two coats of red oxide primer and two coats of anticorrosive enamel paint. Complete job includes cost of material, labour charges(skilled/semiskilled/unskilled), head load, hire charges of tool and tackles, transportation charges, welding equipments (Mobile Gen. Set) Etc. | 1 | Job | - | - |
| 6 | Gate on RD 3730:
Restoration of the gate of size 4’.7” x 2’.8” by way of repairs of the gate, p/f of new winch machine of (3T) capacity Installation at site & checking operation. Complete painting of the structure by scrubbing, removal of dust, then applying 2 coats of red oxide paint & 2 coats of anticorrosive enamel. Assembly at site with new winch machine and checking operation. Complete job involving material cost, labour charges for hiring tools & tackles, consumables, chain pulley block & tripod stand, welding equipments(Mobile Genset) etc. | 1 | Job | - | - |
| 7 | Gate on RD-4600:
Repairs/Restoration of gate of size 3’ x 2’ by way of providing / fixing of gears and bearings to winch machine of 3Ton capacity as per sample along with rain cap and winch machine bottom plate of required size and specification by providing and fixing of new one, duly drilled on all four corners for securing with mounting channels. Anchoring of the top channels for holding of winch machine with the gate frame and then laying of cement concrete block on the top of both sides of gate to work it properly. Re-installation of the gate inside the groove after repairs. Complete painting of the entire gate, leaf and winch machine by scrubbing, removal of old rust, then applying two coats of red oxide primer and two coats of anticorrosive enamel paint. Complete job includes cost of material, labour charges, hire charges of tools and tackles, transportation charges Etc. | 1 | Job | - | - |
| 8 | Gate on RD 5200:-
Repair/Extraction of the gate of size 6’.8” x 3’.4” outside the frame using chain pulley block, tripod stand & manual labour, for p/f of new winch machine of (3T) capacity Installation at site & checking operation. Complete painting of the structure by scrubbing, removal of dust, then applying 2 coats of red oxide paint & 2 coats of anticorrosive enamel. Assembly at site with new winch machine and checking operation. Complete job involving material cost, labour charges for hiring tools & tackles, consumables, chain pulley block & tripod stand, welding equipments. | 1 | Job | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.56 MB
BOQ_1048277.xls
BOQ • 0.25 MB
reextension34.pdf
PDF • 0.53 MB
extension34.pdf
PDF • 0.53 MB
ext34.pdf
PDF • 0.53 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .