Up-gradation of South City A block parks under Ward no. 15 Municipal Corporation Gurugram

Knee HIP Raise:- Providing, and fixing Knee Hip Raise of size 1105 X 550 X 11480 mm make of Green Gym or Equivalent fabricated with main post of 140 rum din and 3.0 mm thick rest or the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Mao Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped

TECHNICAL SPECIFICATIONS and DRAWINGS OF FENCE Specifications for ROW Greenbelts: Height 1500 mm S. No. Product/Description Item 1: Fence as per drawing /assembly: All system components as below will be fitted to provide the fence as given in the assembly drawing. The installation will be done as per the civil construction details given in the drawing for grouting the fence post. 1 Weld Mesh Panels with Fitting Accessories: (a). Weld Mesh Panels: i. Weld Mesh Panels manufactured with electrical resistance welded galvanized wires and subsequently powder coated as per specifications mentioned under. ii. Weld mesh panel for fence will meet the standards of IS 1566/ IS 4849 with the following key specifications apart from the other points in the governing specification: iii. Panel size: 2500 mm X 1500 mm (W x H). Tolerance of plus / - 2 % iv. Mesh Size: 50 mm X 150 mm (W X H). Tolerance of plus / - 2 mm. v. Weld Shear strength: Minimum 50 % of the breaking strength of the smallest wire (In this case the vertical wire) vi. Mesh Wire: Galvanized MS wire Horizontal wire, Dia. 5.0 mm ( plus /- 0.05mm): Vertical wire, Dia. 5.0 mm( plus /-0.05mm) Tensile Strength of wire: Min 500 N/sq.mm: Specification for wire: IS 280 vii. Galvanizing of wire: 100 – 120 GSM as per IS 4826 (Measurement as per IS 6745) Uniformity of Coating: As per IS 2633: Adhesion test for coating: As per IS 2629 (1985) viii. Powder Coating: The galvanized panels are subsequently single powder coated after welding with a thickness of 60 to 80 microns. ix. Powder Coating Make : Akzonoble / Jotun. x. Color: RAL 6005 (Military Green): Coating Standard: EN 10245-1/ IS 13871 xi. Other coating requirement: Powder coating should withstand 720 Hours of salt spray test as per ISO 12944, 1000 hrs of QUV-B Weatherometer Test, Adhesion test, Electrochemical Impedance Spectroscopy Test (Type Test Certificate for the coating standards from renowned Laboratories clearly indicating that the coating passes C3 or higher corrosion protections standard is to be submitted by the bidder along with technical bid). xii. Refer drawing of Panel, attached herewith. 25 mm pointed wires should be left on both sides (top and bottom only), V-band range: 100 mm to 110 mm xiii. Qty: 400 Panels / KM (c) Mushroom Head Bolts with security nuts: i. Each Omega clamp shall be supplied with two sets mushroom headed bolts with security nuts and washers. ii. Material: SS 304 iii. Size: M8 X 25 mm (i) Qty: 3208 nos. / KM Fence Post and accessories (a) Fence Post i. Type: Square Section. ii. Specification: IS 1161-2014 (Medium Grade) iii. Outer Dimension: 60 mm X 60mm plus /- 1 % iv. Thickness: 2.60 mm plus /- 10% (Medium Grade) v. Length: 2000 mm plus /- 2% vi. Galvanization: 380 GSM vii. Powder Coating: The Fence Post are subsequently single powder coated. viii. Colour: RAL 6005 Coating Standard: EN 10245-1/ IS 13871 ix. Other coating requirement: Powder coating Meter

Badminton Court ,(Goal Post (Fix )

Providing And Installation Of Kids Play Equipment -Jungle Gym AREA : 25 X 18 X 12 FEET AGE GROUP : 3-12 YRS CAPACITY : 3-10 “A” Class ISI marked MS Pipe of Reputed Brand (Jindal, Apollo, Bharat Etc). Frp items – 2 wave slide , 2 frp roof , 1 frp tunnel , and all base with frp chequered (non-slippery ), 1 fish attached to climber. SWING SEAT : RUBBER TYPE MAKE IN INDIA FRP Thickness between 3 To 8 mm. PU Coated Paint finish on the MS Structure. As Per Approved Design, including fixing In Ground With cement concrete at specified location till the satisfaction Of Engineer Incharge

Twister:- Providing, and fixing Twister of size 1700 X 1300 X 1300 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and ishapod welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Officer -in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of. equipment etc.`` `

Double Cross Walker/ Cross trainer double:- Providing, and fixing Double Cross Walker of size 1600 X 600 X 1600 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the G.I pipes are 40 mm dia and 2.5 mm thick all G.I pipes made up of hot rolled tubular steel and hot dipped

Horse Rider Station:- Providing, and fixing of horse rider station of size 1000 x 600 x 1100 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Alczo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge.Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and a. .royal of arge regari ing materia , s ape of equipment,colour on metal, seat and

Pull Chair:- Providing, and fixing of Pull pair of size 2500 X 800 X 2000 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 3.0 mm thick all pipes made up of hot roiled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc .primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be` made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within b

Polypropylene tiles having Dimension 1 feet * 1 feet, weight 310 gram. Weight capacity 18 tons (appx.), Available in Navy, blue, Royal blue, Red, green, grey colour. With warranty of 2 years. Complete in all respect i.e laying and installation, marking and transportation