C/O HPPWD Executive Engineer Office building at Bhoranj District Hamirpur (H.P.) ( Sh Providing E.I. therein)

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.Make:- Legrand(Myrius),L&T(entice), Anchor (Roma plus ) as approved by Engineer-in -charge .

Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.Make:-Legrand(Myrius),L&T(entice), Anchor (Roma plus ) as approved by Engineer-in -charge .

Group C.

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. Make:-Legrand(Myrius), L&T(entice), Anchor (Roma plus ) as approved by Engineer-in -charge .

S.P. 5/ 6 Amps one way Modular switch.

5 pin, 5/ 6 Amps Modular socket outlet.

Telephone socket outlet, Modular.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.Make:-Legrand(Myrius),L&T(entice), Anchor (Roma plus ) as approved by Engineer-in -charge .

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.Make:-Legrand(Myrius),L&T(entice), Anchor (Roma plus ) as approved by Engineer-in -charge .

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required.Make:-Legrand(Myrius),L&T(oris/entice) ,Anchor (Roma plus ) as approved by Engineer-in -charge

2 modules (78mmx78mmx50mm)

Supplying and fixing Computer board comprising 3 nos 5 amp modular switches , metal box 2 module for jack box and metal box 200 mmx150 mmx75 mm for 5 amp switchs and 5amp sockets comprising sheet cover for each 2module metal box , one no computer jack (RJ-45)with shutter including connections etc as required .Make:-Legrand(Myrius),L&T(entice),Anchor (Roma plus ) as approved by Engineer-in -charge .

Supplying and fixing power socket 25 amp with 25 amp switch and 2 module metal box incuding cover plate(2nos), making connection ,testing etc as required. Make:- L&T/Anchor/Havell's or its equivalent make.

Supplying and fixing 20 Amps, 240 volts, SPN industrial socket outlet, 2-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 20 Amp SPN-MCB/DP, on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required. Make:-L&T, Legrand, Hagger, or its equivalent as approved by Engineer-in -charge.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required..Make:-KEI,Anchor ,Polycab as approved by Engineer -in -charge .

2x2.5 Sq. mm.

2 x 4 Sq. mm.

2x10 Sq. mm.

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required..Make:-KEI,Anchor ,Polycab as approved by Engineer -in -charge .

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.Make:-KEI,Anchor ,Polycab as approved by Engineer -in -charge .

2x1.5 Sq. mm.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required..Make:-KEI,Anchor ,Polycab as approved by Engineer -in -charge

3x1.5 Sq. mm.

3x2.5 Sq. mm.

3x4.0 Sq. mm.

Providing installation testing and commissioning of ceiling fan with step size socket size regulator , including wiring the down rods of standard length (up to 30 cm ) with 16/0.20 mm twin twisted flexible ,cotton braided copper cable including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc as required. Make:- Usha Technix plus ,BEE,Havell,s velocity or its equivalent not less than three star rating.

ceiling fan 1200 mm

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required.Make:-Usha ,Crompton or its equivalent as approved by Engineer-in - charge.

Exhaust Fan, Heavy duty, 300 mm sweep

Supplying and fixing of Exhaust fan (Plastic) with Louver shutter 300mm 1000RPM `1125 Air Delivery Ex fan on the existing opening including making the hole to suit the size of above fan making good the danmages complete with connections,testing and commissioning etc. as required.Make :-Usha ,Crompton ,or its equivalent as approved by Engineer-in-Charge.

S/F of Cabin/wall fan 400 mm Mist Air on the existing wall complete with connections,testing and commmissioning etc,as required.Make:-Usha,crompton or its equivalent as approved by Engineer-in - charge .

Supply and fixing exhaust fan louver shutter for 300/380mm exhaust fan on the existing wall painting including 12 mm thick wooden ply board for suitable size of exhaust fan hole.

Supplying and fixing bakelite batten/angle holder including connections etc. as required:-

Supplying and fixing of bulk head fitting LED 10 watt ,6500k ,(Five YEAR WARRANTY ) and it should be compatible with specification e.i. Power Factor > .9,Harmonic Distortion<10% and efficacy >100 Lumens per watt, suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc.Make -Panasonic (Model -PBHM01107) /Jaquar/PHILIPS ,wipro or its equivalent as approved by Engineer-in-Charge

Supplying and fixing call bell / buzzer, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:-Confrming to IS :64139 and tested /approved from the CPRI lab .Make:-EVA/Power control & system.

300 mm deep (nominal)

Supplying and fixing 4 pole MCCB 63 Amp Ics = 100% icu, 25KA & @ 415 volts, 50 Hz with thermal magnet in release complete with connection ,testing and commissioning etc as required .Make:-L&T Cat. No. CM91712OOJOOG,Legrand, Heggar or its equivalent as approved by Engineer-in -charge.

Supplying and fixing of 4 pole MCCB 100 Amp Ics = 100% icu, 25KA & @ 415 volts, 50 Hz with thermal magnet in release complete with connection ,testing and commissioning etc as required. Make:- L&T Cat. No. (CM90642OOLO), Legrand, Hagger, or its equivalent as approved by Engineer-in -charge.

Supplying and fixing of 4 pole MCCB 200 Amp Ics = 100% icu, 25KA & @ 415 volts, 50 Hz with thermal magnet in release complete with connection ,testing and commissioning etc as required. Make:- L&T Cat. No. (CM90642OONO), Legrand, Hagger, or its equivalent as approved by Engineer-in -charge.

Providing and fixing 200 AMP , four pole, 415 volts, On-Load change over switch in cubical panel front handle operation, including drilling holes in the cubical, making connections, etc. as required.Make:-L&T (CODE:-CO22000OOOA), Legrand, Hagger, or its equivalent as approved by Engineer-in -charge.

Supplying and fixing copper strip bus-bars suitable for 200 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx4.75mm),in the existing enclosure with all accessories including connections etc. as required.Make:-L&T ,Legrand,Hagger as approved by Engineer-in -charge.

Supplying and fixing copper strip bus-bars suitable for 100 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx3.17Mm),in the existing enclosure with all accessories including connections etc. as required:-.Make:-L&T ,Legrand,Hagger as approved by Engineer-in -charge.

S/F indicator set RY &B with 3 Nos Kit kat (LED type) to shown the three indicating in the existing pannel complete etc as required.

S/F Shock treatment chart on the existing wall etc as required including carriage of material within all leads and lift.

S/F rubber mat 1x2 meter long 12mm thick infront of main panel as required including carriage of material with in all leads and lift.

Supplying and fixing CT coil 500/5 amp with burden of VA 15 accuracy class -1 Make:- Automatic Electric Ltd, L&T, Legrand .

Providing and fixing M.V.danger notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required.

Supplying and fixing of Segregated tripple pole and neutral 12 way, sheet steel MCB distribution board 415 Volt on surface /recess with provision to mount MCCB as incomer with provision of 125 amp insulated phase bus bar /neutral bar with shroud/s /earth bar sticking saddles cement spill protector /colour coded interconnected wire set /cable ties/blanking plate and circuit indentification labels .SP/TP MCB as out going ,Powder painted including earthing etc as required. Make:-L&T (code-DBPGLO12DD ) /Legrand, Hagger , or its equivalent as approved by Engineer-in charge.

Supplying and fixing of cable end box for phase vertical TPN DB 12WAY , in CRCA steel RAL 9003 powder coated can be either fitted at top or bottom of distribution board .Make:-L&T (CAT NO- DBPSGO12CB) /Havell/schinder or its equivalent as approved by Engineer-in -charge.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-Make:-L&T ,Legrand,Hagger as approved by Engineer-in -charge.

Double door-4 way

Double door-12 way

Double door-16 way

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:Make L&T Legrand,Heggar as approved by Engineer-in -charge

Single pole. Cat-A.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-:Make L&T, Legrand,Heggar as approved by Engineer-in -charge

Double pole. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. :Make L&T, Legrand,Heggar, as approved by Engineer-in -charge

40 Amps. Cat-A.

63 Amps. Cat-A.

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required.

Providing and fixing 8 SWG (4 mm dia.) copper wire on surface or in recess for loop earthing as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Riveting, sweating and soldering of copper/ G.I. tape ( with another copper/G.I. tape, base of the finial or any other metallic object) as required.

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run)

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size. Make :- KEI, Plaza, Polycab.

Armoured cable 70 sq. mm (3.5 core)

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required. Make:- Racold,Jaquar, Usha ,minimum 3- star rating.

10 Liter capacity water heater (Cat-A)

Supplying and fixing surface mounting 1'x4' size 36 Watt LED surface mounted base light comprises of CRCA housing luminaire LED 36 watt 5700 K with five year warranty and it should be compatible with specification i.e Power Factor > .95,Harmonic Distortion<10% and efficacy>100 Lumens per watt suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc.as required Make :-Panasonic (Code :-PBLM15368) Jaquar, Philips ,wipro or its equivalent as approved by Engineer-in-Charge.

Supplying and fixing SURFACE SQUARE type LED 36 watt 2feet X2 Feet, 6000k, (Five YEAR WARRANTY ) and it should be compatible with specification e.i. Power Factor > .9, Harmonic Distortion<10% and efficacy >100 Lumens per watt, suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. Make -JAQUAR (Model -LSVR01S036 SC )/Philips/Panasonic/wipro or its equivalent as approved by Engineer-in-Charge

Providing and fixing of surface mounted Luminaire LED 36 Watt batten ,having high Quality design aluminium extruded decorative end caps with (Five year warranty) and it should be compatible with specification i.e. Power Factor >.9, Harmonic Distortion <10% and efficacy >100 Lumens per watt ,CRI> 80 suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc.as required .Make :- Panasonic (PBTM08368), Jaquar, Philips, wipro or its equivalent as approved by Engineer-in-charge.

Supplying and fixing LED BATTEN 10 watt ,6500k ,(Five YEAR WARRANTY ) and it should be compatible with specification e.i. Power Factor > .9,Harmonic Distortion<10% and efficacy >100 Lumens per watt, suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc.Make -Jaquar (Model -LGLZ01X010XC ) /Panasonic /PHILIPS ,wipro or its equivalent as approved by Engineer-in-Charge

Supplying and fixing surface square type LED 15 watt, 6000k, (Five YEAR WARRANTY ) and it should be compatible with specification i.e. Power Factor > .9, Harmonic Distortion<10% and efficacy >100 Lumens per watt, suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. Make:- Panasonic (Model -PDLM11156BS)/Philips, wipro or its equivalent as approved by Engineer-in-Charge.

Supplying and fixing surface square type LED 20 watt, 6000k, (Five YEAR WARRANTY ) and it should be compatible with specification i.e. Power Factor > .9, Harmonic Distortion<10% and efficacy >100 Lumens per watt, suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. Make:- Panasonic (Model -PDLM11206BS)/Philips, wipro or its equivalent as approved by Engineer-in-Charge.

Supplying and fixing Square LED Recess type 20 watt, 6000k, (Five YEAR WARRANTY ) and it should be compatible with specification i.e. Power Factor > .9, Harmonic Distortion<10% and efficacy >100 Lumens per watt, suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. Make:- Panasonic (Model -PPAM 12206BS)/Philips, wipro or its equivalent as approved by Engineer-in-Charge.

Supplying and fixing of LED 35 Watt street light ( five year warranty) with innovative & aesthetic & robust design with aluminium heat sink and toughened glass (IP 66) with specification e.i. Power Factor > .9, and efficacy >100 Lumens per watt, CRI> 80 suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make -Panasonoic(code:-PSTM27358 ) Jaquar /Philips/ or its equivalent as approved by Engineer-in-Charge.

Supplying and fixing LED. Lamp 9 watts E-27 base in the existing batten holder/pendent holder .Make:-Philips,Wipro.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.Make:-Diplast/BEC.

25 mm. dia

50 mm. dia

Supplying and fixing of wall mounted 4U rack size: 550x400 mm depth including its complete accessories i.e.front glass door (tinted,toughened) with lock&key, 2 pairs pf 19" mounting rails with U-marking welded side walls 1U cable manager(1), hardware packet (1pkt), 3 socket 5 amp, power distribution unit (1 No) as per product code NWR-4U-5040-GR as required. Make:- D-Link.

Supplying and fixing D- link DGS-1100-16V2 16-Port 10/100/1000 Mbps L2 managed switch standalone switch in desk top (green ethernet) for getting blazing speed of Gigabit Ethernet L2 switch that delivers power performance and reliability i.e increasing the speed of net work server in large in switching protocol storing and forwarding as required .Make:- D-Link.

Supplying and drawing Lan cable Cat -6 solid copper conductor 4 pair protected with PVC Sheathed in existing surface /recessed steel/PVC Conduit as required. Make :Polycab,Finolex ,D-link.

Supplying and fixing 1.5 ton invertor split type air conditioner Hot and Cold with vloltage stablizer 150v to 280 v , advanced filter ,E saver mode , quit mode, dual display ,auto clean ,anti bacteria filter jet Cool on/off timer sleep mode compressor cord less remote complete in all respect as per comprising to ISI with latest amendment suitable to operate on 230 volt /240 volt +_ 10 % AC supply capable to perform the function of cooling dehumidification air circulation ventilation and fitting in size of nominal cooling capacity and drain pipe 20 mm dia approximately 3mrs long 2 nos copper pipe with insulator for inlet and outlet approximatey 3 mtrs long and M.S power coated frame /stand for erection of out door unit of split type A.,C including carrigae of material with in all leads and lift.Make -Daikin (model:FTHT50), O General/ Mitsubsi or equivalent as approved by the Engineer Charge.

Supplying and fixing of DLP 105x50 mmPVC adaptable trunking on the exiting wall at required height from lower level for power connection, light connection and net working connection including partition chip flexible cover end cap .Make:-Legrand ,MK or its equivalent as required complete in all respect .

Providing, laying and fixing of interconnecting copper piping with Nitrile tublar insulation AC indoor to outdoor for split type AC 1.5 ton and 1.8 AC as required complete in all respect.

Providing, laying and fixing of drian condensate drain water pipe with all necessary fitting for alll type A.C as required complete in all respect.

Supplying and fixing Surge protection device protection against indirect/direct lighting surges maxiumum dicharge current- I max upto 100 KA/ 3 pole+neutral Type 1+2 .Make :L&T(AUSP 123PN100),Legrand ,Hagger as approved by Engineer-in charge.

SHARMA ELECTRICAL CO.