Denting, repairing, fabrication of damaged operator cabin including operator seat and machine structural components of ZX650H, Sl. No. OACG001013 Hydraulic Shovel of Khadia Project.

Amount

Scope of Work/Technical Specifications etc: I. Cleaning and Dismantling of Damaged Operator Cabin: a) Complete cleaning of the machine. b) Dismantling of the damaged operator cabin, including: i). Cabin gate (inner and outer) etc. ii). All side cabin walls etc. iii). Cabin canopy etc. iv). Window frame etc. v). Removal of cabin mounting bolts etc. c) Repairing and Fabrication Work:- Complete repairing, denting, and fabrication of the operator cabin etc. d) Reassembly and Fitting of the operator cabin etc. II. Dismantling, Repairing, fabrication, Reassembly and Fitting of Damaged Supporting Structures by gas welding work:- a) Safety covers of Hydraulic tank, PTO(top),Swing motors, swivel joint of travel motor hoses, control valves, and AFDSS cylinder, silencer, battery box ,counterweight plating etc. b) Supporting channels for engine guards & Hydraulic tank base to Main pump base and misc minors damaged structural components of machine etc. III. Painting of dented, repair, fabricate and damaged area of machine and Name and number writing with paint etc. IV. Dismantling the damaged operator seat and carrying out necessary repairs and Reinstalling the operator seat after repairs etc.

Denting, repairing, fabrication work of (TH-1) ZX650H Hydraulic Shovel

Charges for cabin denting work of (TH-1) ZX650H Hydraulic Shovel. Note : Details of total cabin area:- 1.Cabin canpoy (2’X 4’) = 8.00 Sq. ft. 2.Operator cabin gate inner & outer (3’ X 5’) X 2= 30.00 Sq. ft. 3.LHS cabin wall (6’ X 6’) X 2 = 72.00 Sq. ft. 4.RHS cabin inner and outer (6’ X 6’) X 2 = 72.00 Sq. ft. 5.Cabin rear and front (4’ X 6’) X 2 X 2 = 96.00 Sq. ft. 6.Cabin roof denting (4’ X 6’) X 2 = 48.00 Sq. ft. 7.Cabin Front side bottom grill denting (2’ X 4’) = 8.00 Sq. ft. Total of Denting area of damaged operator cabin = 334.00 Sq. ft.

Labour charges for repairing (dismantling and fitment) /fabrication of inner portion of operator cabin and Dismantling,Repairing ,fabrication,Reassembly and Fitting of Damaged Supporting Structures [ (a)safety covers of Hydraulic tank, PTO(top), Swing motors, swivel joint of travel motor hoses, control valves, and AFDSS cylinder, silencer, battery box , counterweight plating etc. (b)Supporting channels for engine guards & Hydraulic tank base to Main pump base and misc minor damaged structural components of machine etc.] by gas welding work including contractor profit. Note : It includes a group of 01 No. Supervisor, 04 Nos. Skiled Fitter, 02 Nos. Skilled Welder and 05 Nos. Semi-Skilled Helper Manpower in 02 Shifts per day for 15 days for 01 Job.

Hiring and material charges for the work listed above under Sl. Nos. 2.01 and 2.02.

Welding machine - 02 nos. for maximum period of 15 days for 01 job.

Gas cutting sets with access. - 02 nos. for maximum period of 15 days for 01 job.

Grinder Machine- 02 nos. for maximum period of 15 days for 01 job.

Grinding wheels - 04 Nos

Transportation Charges for 1 no. jeep for maximum period of 15 days for 01 job

Misc. tools & tackles like spanners, hammers, crow bars ,safety PPE kit, markin clothes,cotton waste and hand washing soap etc.

Cost of HT Nut Bolt with washer (5/8' x 1'')

Cost of replacement of doorbead-1"(25Rft)

Cost of replacement of door handle with door lock (HD4" x 6")

Cost of Hinge 5"

Cost of Latch 10"

Cost of Screw nut bolt with washer 2.5"

Cost for fitting of heat insulation mat for roof side wall rear wall & door 1/2".

Cost for Celling rear, side wall & door board (1/2" thick)

Cost for Wooden beat 1"

Cost for Ply fitting under roof side, rear wall and door - 6 mm

Cost of Rexine

Cost of fitting of floor mat (1/2" thick)

Cost of Solution

Painting of dented, repaired, fabricated and damaged area of machine and Name and number writing with paint etc

Charges for Painting of Machine (1 coat red Oxide primer & 2 coat Synthetic Enemal Paint, approximate area = 900 Sq. ft)

Charges for Name and number writing with paint

Repairing of operator seat with cover and hand rest of (TH-1) ZX650H Hydraulic Shovel.

Cost of Rexin for seat and back rest

Cost of Foam 3" for seat and back rest

Cost of Adhesive

Cost of Coconut coir

Cost of Nut and Bolt with washer

Cost of Stiching rexine(seat and back rest)

Cost of Catarised cloth

Fitting charges

Cost of Stitching cover (seat and back cover)

Total impact of GST for the purpose of CTC

M/s A.K. Chaubey (BID ID -1153404)

M/s. S K Engineering Works (BID ID -1154265)