Repair and Extension of Mortuary Building and Construction of CC Approach Footpath from the side of Vehicle Shed to Mortuary Room at Govind Nagar in Swaraj Dweep under CDI APWD, SVP under EandM Division, APWD, Prothrapur SW Providing IEI

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. a) Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying of following size of XLPE insulated heavy duty armoured aluminium conductor UG cable of 1.1 KV grade conforming to IS: 7098 (Part-I) and IS No:1554 (Part-I) 1988 as applicable Make: CCI/Gloster/ Havells/ Polycab/Finolex etc as reqd. a) 25 Sq.mm x 3.5 Core

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. a) Upto 35 sq. mm

Supplying and laying of one number double walled corrugated high density Polythylene pipe having corrugation on the outer wall and plain surface inner wall confirming to IS: No. 14930 Part -I & II complete with necessary HDPE fitting for protection of 1.1 KV grade directly in ground at the depth of 50 cm i/c excavation and refilling the trench etc., as required. a) 50 mm outer dia & 38 mm Inner dia

Supplying and laying of one number double walled corrugated high density Polythylene pipe having corrugation on the outer wall and plain surface inner wall confirming to IS: No. 14930 Part -I & II complete with necessary HDPE fitting for protection of 1.1 KV grade following size on wall surface as required. a) 50 mm outer dia & 38 mm Inner dia (clamped with MS flat clamp)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 3½ X 25 sq. mm (28mm)

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. a) Upto 450 mm sweep

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 12 way, Double Door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single Pole

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 63 A

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Supplying of T8 20W Fitting Make Philips Model TMC 501 P 1xT-LED 22W P3241 with LED Tube 20W of Make Philips Model Essential LED Tube 1200mm 20W865 T8 IND I or its equivalent etc., as required.

Supplying of 15W LED Lamp CDL, 6500 K directly fitted in button holder as equivalent to Havells CLASSY LED 15W B22 CDL 3 STAR Order Code LHLDEUEEML8R015 or its equivalent or its equivalent

Supplying of Metal body 300 mm Exhaust Fan Similar to Make Crompton Semi Commercial Model 300mm TRANSAIR (Double Ball Bearing)or its equivalent etc., as required

Supplying of BLDC Ceiling Fan 1200mm Sweep ISI Marked (Color: Opal White, Brown) Similar to Crompton Energion Riviera (ISI) with out remote or its equivalent(ISI Marked and BEE 5 Star Rated) power consumption with switch control, 5 years warranty etc., as required.

Supplying and Fixing of Socket Type Stepped Type Electronic Fan Regulator equivalent to Pressfit Glory 5 Step Regulator (Board) Coad-546070 on the existing Gang Box including connection or its equivalent, etc., as required.

Supplying and Fixing of Street Light 45W IP65 similar to Crompton FREEDOM NEO LSTS-45-CDL-M i/c suitable size 45 degree street light bend pipe arm with clamping or its equivalent, etc., as required.