SPECIAL REPAIR TO ROOFING SHEETS FALSE CEILING AND PLASTERING IN BLDG NO 05 BMFH AT RVC C and C UNDER GE (N) MEERUT CANTT

Amount

Taking down shutter of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed.

Taking down chowkhat with shutters (without taking of shutter from the frames) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhat with shutters (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable to store and rubbish off the premises complete all as specified and directed.

Demolition of brick work or stone boulders masonry built in cement mortar including all quoins aches pillars etc but excluding ashlar facing also ssed stone work complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15cm thickness (below or above grond level) complete all as specified and directed.

Dismantling AC sheet corrugated or semi corrugated sheet inc. ridges of any description as in roof and including removal from the site complete all as specified and directed.

Demolition wall and ceiling boards (fibre,pulpinsulation etc) or insulation boards /slabs/blankets any thickness including cover fillets complete all as specified and directed.

Taking down of cement or cement lime plaster/skirting/ dado of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surroundds glazed with putty or fixed with bead complete all as specified and directed.

Dismantling of mangalore pattern roofing tiles with ciling tiles or slate roofing complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads in square nexc 0.50 sqm each pane complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth with out using extra cement complete all as specified and directed.

M&L applying 10 mm thick rendering on ceiling in cement mortar 1:3 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for applying 15mm thick in CM 1:4 rendering using ready mix plaster bags on brick/concrete suface of extenal wall finished even and fair complete all as specified and directed.Make : Ultratech, rediplast, Birla Acrocem. Note Contractor is required to deposit ready mix bags for 100% CA quanitity to Engr-in-charge with in 15 days of acceptance of contract.

M&L for preparation of old/new plastered suface of wall and applying two coats of Acrylic exterier Emulsion paint using rollex for painting complete all as specified and directed. Note: - Preparation/scraping shall be done by mechanical means.

M&L for preparation of old/new plastered suface of wall and applying two coats of oil bound distemper using roller for painting complete all as specified and directed. Note: - Preparation/scraping shall be done by mechanical means.

Preparing of new/old plastered suface of ceiling and applying two coats of white wash on ceilling complete all as specified and directed. Note: - Preparation/scraping shall be done by mechanical means.

S&F 35mm thick 2nd class hardwood plain framed paneled shutters (any number of panels) with panels of Timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

S&F 35m thick glazed and skeleton shutter open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) of IInd class hard wood complete all as specified and directed.

S&F steel windows with pressed steel frame made out form 1.25mm thick steel with one or more rebate with glazed shutters and ply proofing shutters including guard bars, hings peg stay handles tower bolts lugs including treated with for or coal tar black paint on steel surface in contact/embedded in concrete/masonry work complete all as specified and directed. Note- Disturbed suface of wall shall be made good to true suface.

S&F steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, window, ventilators and partitions (fixed portion) with extruded built up standard tubular section's/appropriate Z sections and other sections of approved make conforming to IS:73 and IS:1285, fixing with dash fastners of required dia in size including necessary filling of the gaps at junctions i.e. at top bottom and sides with required EPDM rubber/neoprene gasket etc, aluminium section shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle aluminium snat beading for glazing/paneling CP brass/ stainless screw's complete all as specified and directed.

S&F powder coated aluminium door shutters aluminium sectioin weighing .55kg/m including necessory joining cleats ,glazing clips, rubber neoprene packing handles 2 Nos in each door, hinges anodised aluminium snap beading screws etc complete all as specified and directed.

S&F anodised powder coated anodised aluminium window and ventilater shutters fixed type with out sash bar aluminium section weighing .55 kg/m including necessary joining cleat, glazing clips rubber packing anodised aluminium snap beading screws etc complete all as specified and directed.

S&F 4.8mm thickness sheet glass ordinary quality and glazing with oil putty in square not exc .5sqm in each pane complete all as specified and directed.

All as per item No 26.00 but exc 0.5 sqm in each pane complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor overall length of cover plate 1401mm complete all as specified and directed.

S&F door closer hydraulically aluminium (extruded section body) designation No3, universal type suitable for door shitter of 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia. of wire and avg width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk)and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength 50 N/mm2, modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, all as per direction of Engr-in-Charge. (Note: - Stainless steel butt hinges and necessary stainless steel screws shall be paid separately).

S&F factory made signle extruded WPC (Wood Polymer Comosite) solid door/window/Ceosetory windows and other frames/chowkhat of size 45 x 70 mm comprising of virgin PVC polymer K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed wih full body threaded star headed stainless steel screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (face) and 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/stainless steel dash fastners of required dia and length complete as per direction of Engr-in-Charge. (MS hold fast/lugs or stainless steel dash fastners shall be paid for separately). Note: - For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptale but no extra payment on this account shall be made.

S&F 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 250mm length of bolt aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F aluminium anodised 150mm length of bolt barrel tower bolt of extruded section complete all as specified and directed.

S&F 125mm size of aluminium hanles cast type anodised complete all as specified and directed.

S&F Brass chromium plated tubular towel rail 20cm dia , D type 60mmlong between flanges complete all as specified and directed.

Preparation of new wooden surface and applying two coat of synthetic enamal paint over a coat of pink primer over 10Sqm width or girth complete all as specified and directed.

Preparation of old wooden surfaces and applying one coat of synthetic enamal paint over 10cm width and girth complete all as specified and directed.

Preparation of new steel suface and applying two coat of synthetic enamal paint over a coat of red oxide over 10cm width and girth complete all as specified and directed.

Prepration of old steel surfaces and applying one coat of synthtic enamel paint over 10cm width and girth complete all as specified and directed.

S&F size of grid 605X605mm anodised aluminium snap grid frame work for false ceiling complete all as specified and directed.

S&F 4mm thick non asbestos fibre cement building boards fixed or laid /inserted to timber /GI/aluminium frame work with screws complete all as specified and directed.

S&F Fe - 290 (Gde E- 165) for Framed work as in doors , chowkhats or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, support to velley gutters, wind ties for roof sheets, framing for monkey proofing, welded mesh of pitch as decided by Engr-in-Charge, support to sign board & fencing post, etc. as specified to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S & F Rolled sections Fe 410 -W (grade E-250) quality A as in main and cross beams, base plates, side supports, hip and jack rafters; purlins, windties where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting member as directed and specified and directed by by engg - in- charge.

M&L granite(of any type) tiles 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with ad mixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L stone slab 50mm thick cement mortar 1:4 dressed true and square, in one length not less than 60 cm and not exc 120 cm in copings, window cills, chajjas, sunshade etc punched dressed on exposed faces and self faced on the embedded unexposed beds and joints, exposed edges round or chamfered, set, jointed and pointed in mortar as in plinth protection complete all as specified and directed.

S&F in repair 15mm dia pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or with out lettered 'Hot or 'cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm bore stop valves cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs 15mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

All as per item No 50.00 above but 20mm bore complete all as specified and directed.

S&F in repairs CP bib tap 15mm bore cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium red & high density plastic ball screwed for iron pipe(minimum wt 20mm-210grms) complete all as specified and directed.

S&F in repair grating doom 125mm dia with waste holes of PTMT (minimum wt 40 grms) complete all as specified and directed.

S&F in repairs towel ring of PTMT fixed with and including C.P brass crewes and wooden /plastic cleat (minimum wt 90 grms) complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F PVC(SRW) 75mm floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking up or down steel tubing 15mm and connection including cleaning for refixing or remoal to store complete all as specified and directed.

All as per otem No 58.00 above but 20mm tube complete all as specified and directed.

S&F 15mm GI tube medium grade galvnised with all fittings laid on trenches and wall complete all as specified and directed.

All as per item No 60.00 above but 20mm tube complete all as specified and directed.

S&F in repair 500 liters capacity rotational moulded polythyline water storage tanks white colour (cylindrical vertical with closed tap) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

All as per item No 62.00 but capacity in liters 1000 complete all as specified and directed.

S&F in repair liters capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle including bracket complete all as specified and directed.

S&F in repair vitreous china bowl urinal flat back size of 465X355X265 mm chote (minimum) with grating and union for discharge pipe and watepipe (excluding flushing cistern) complete all as specified and directed.

S&F inrepair vitreoces china wash down water closet pan( pedestal pattern) white (excluding fixing bolts flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair of vitreous china squatting pan of pattern "long pan" size 580 x 440 mm white with ‘P’ or 'S' trap, front or back inlet and foot rests any pattern (excluding flushing cistern and flush pipe complete all as specified and directed.

S&F in repair vitreous china wash basin white flat back size 630X450mm including CP 15mm pillar tap 32mm CP waste coupling waste pipe and brackets complete all as specified and directed.

S&F plastic cipla plast multipurpose bath room coloured mirror cabinet storage size height 54cm ,35cm width and 13cm depth wall mount complete all as specified and directed.

M&L for repairing the cleaned surface through repair mortar and applying priming coat of epoxy primer with resin and hardner in 1:3 ratio with water dilution as per manufacturer instructions, applying 2 coats of solvent based Polyurethane liquid applied membrane not less than 500 micron thick UV stable having SRI value greater than equal to 105 with consumption of 0.61 kg/sqm (each coat), 2nd coat should be applied once 1st coat becomes dry completely all as specified and directed. Make: Asian Paints/Thermax. Note: - (i) The work under this item shall be carried out by the authorised applicator of Manufacturer by using modern techniques. The contractor shall also furnish warranty of quality, finish work and effectiveness of waterproofing treatment under this item for a period of 10 years from the date of completion alongwith manufacturer warranty of material for the same period. (ii) Height of building can be more than 10 meters with no staircase to reach at the top of the building. (iii) Second coat must be applied when first coat is completely dry and approved by Engr-in-Charge.

M&L for coloured glazed ceramic tiles in vertical surface 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement over 10mm thick rendering in C.M 1:4 finised even and fair complete all as specified and directed.

M&L for non skid coloured ceramic tile 7 to 8 mm thick area of each tile exceeding .18 but n.exc .38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cemnt over i15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for vitrified ceramic coloured tiles 10mm thick(Square/rectangular) polished area of each tiles not exc .36sqm in floors etc set and jointed in neat cement slurry and pointed in while or coloured cement over 15thick sereed bed in cement mortar 1:6 complete all as specified and directed.

All as per item No 74.00 above but on wall as skirting over 10mm thick rendering in CM 1:4 complete all as specified and directed.

S&F 75mm PVC (SWR)pipe single socketed in any length with rubber ring joints fixed to wall or laid in trenches complete all as specified and directed.

All as per item No 76.00 above but 110mm bore complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

All as per item No 78.00 above but 110mm bore complete all as specified and directed.

Taking down eaves gutter and rain water pipe and size any pattern PVC /AC pipe including all fittings heads shoes bands etc including removal to store complete all as specified and directed.

M&L for brick work with fly ash bricks straigt or curved on plan exc CM mean radius build in CM 1:6 complete all as specified and directed.

Dismantiling timber scantlings 40 sqm and over cum in section in any position unframed work complete all as specified and directed.

All as per item No 82.00 above in fillets rails ,posts ,rafters, purline etc complete all as specified and directed.

S&F stainless steel peg set 8 Nos in 45cm length strips dia of hooks 6mm complete all as specified and directed.

S&F pre-painted galvalume aluminiun zinc coating (AZ-150) GI corrugated steel sheet .50mm thick of green colour having tensile strength of 550mpa as in roof covering cladding to wall fixed with self tapping secrwes complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating (AZ-150) GI based plain sheet .50mm thick of green colour having tensile strength of 550mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

Demolition of cement concrete (unreinforced) of roof floors beams, stair case, landing, chajjes and similar suspended work complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for machine cut pre polished kota stone flooring 18-20mm thick over 20mm screed bed in cm 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut pre polished kota stone 18-20mm thick thick in riser of steps, skirting, dado and pillar laid over cement screed over 10mm thick rendering in cm 1:4 and jointed with grey cement slurry mixed with pigment ot match the shade of the slab including rubbing and polishing complete all as specified and directed.

Taking down carefully any type, battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified & directed.

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, sheathed, copper conductor cable in and including PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, sheathed and connected to common earth and earth duly complete all as specified and directed for the followings :-

One tube light/bulb/security light/bell point/bell/buzzer/fan point controlled by one, one way switch 05/06 Amps complete all as specified and directed.

One fan/exhaust fan point controlled by one, one way switch 05/06 Amps complete all as specified and directed.

One 3 pin 5/6 amps socket outlet point on independent board, controlled by one, one way 5/6 amp switch complete all as specified and directed.

One 3 pin 5/6 amps socket outlet point on same board, controlled by one, one way 5/6 amp switch complete all as specified and directed.

One bell point controlled by one, one way switch 05/06 Amps complete all as specified and directed.

All as per serial item No 92.03 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15/16 Amps socket outlet point on independent board complete all as specified and directed.

S&F Switch piano flush type, 05/06 Amps single pole, one way 240 volts complete all as specified and directed.

S&F in socket outlet 5 pin, 05/06 Amps flush type 240 volts complete all as specified and directed.

S&F in socket outlet 3 pin, 05/06 Amps and 3 pin 15/16 Amps (2 in 1 multipurpose) 240 volts complete all as specified and directed.

S&F Switch piano flush type, 15/16 Amps single pole, one way 240 volts complete all as specified and directed.

S&F bell push flush type, 5 Amps, 240 volts complete all as specified and directed.

S&F bell, AC, 230 volts, single pole Cona/Anchor complete all as specified and directed.

S&F lamp holder (Angular/Striaght), insulated body, with back plate complete all as specified and directed.

S&F LED lamp 9/10 watt fixed in lamp holder complete all as specified and directed.

S&F decorative wall mounted LED tube light fitting 20 watt with polycarbonate housing with all accessories and fixing material complete all as specified and directed.

S&F decorative LED tube light fitting 10 watt wall mounted with extruded polycarbonate integrated lamp and driver with opal diffuser and decorative end plates complete with all accessories and fixing material complete all as specified and directed.

S&F in repairs LED Recess mounted, cailing pannel, 2'x2', 36 watts, 240V light fitting with heat exchanger unit complete all as specified and directed.

S&F 1x25W/35W LED building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security brackets of 32 mm dia GI pipe medium grade upto 1.2mtr long bend of shape at 100-200 degree including flat iron clamps and suitable nuts and bolts grouted in wall including all material required for fitting complete all as specified and directed.

S&F of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.

M&L for sub main wiring with 06 Sq mm (nominal cross section area) two single core, 1100 Volts grade, stranded, FRLS PVC insulated, sheathed copper cable with and including continuous earth wire of size 6 Sqmm nominal roll cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25mm dia, medium grade with all conduit accessories/ fittings, brass screws, washers etc and connected to common earth dolly including all cutting/chases etc in wall, making good to walls etc including taking down old U/S sub main wiring and two coats of white/ colour washing/ distempering etc to the disturbed surfaces to match the exisiting complete all as specified and directed.

S&F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP-43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempring etc to match the existing disturbed surfaces complete all as specified and directed.

S&F MCB, SP, AC, 240 volts "B" series capacity of 06 to 40 Amps, 10 kA and making connections complete all as specified and directed.

S&F isolator (double pole), AC 240 volts, capacity of 32 to 40 Amps and making connections complete all as specified and directed.

S&F MCCB 4 pole, 100 Amps 16 kA complete all as specified and directed.

S&F vertical loadline sheet metal enclosure double door, triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with provision of 16kA 100 Amp G frame MCCB. Make - Legrand/Schneider/ABB/Indo-Asian with the inbuilt provision for fixing of 1 No MCCB and 12 Nos MCB's inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white/colour washing/distempering etc to match the existing one complete all as specified and directed.

S&F exhaust fan steel body AC single phase 230/240 Volts size 300mm sweep with blades and louvers complete all as specified and directed.

S&F ceiling fan complete with blades, down rod electronic regulator and accessories 230 V, 1200mm sweep, Min air delivery 210 CFM with service value 6.00 BEE five star rating BLDC complete all as specified and directed.

M&L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 03 of SSR part-I connecting to main switch board/ Main DB's including exacavtion, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm centre to centre both way with suitable lifting handle and pit/ chamber in PCC 1:3:6 type C1, Angle iron 40x40x5mm frame for pit cover including testing on completion, complete all as specified and directed.

SA construction co.

YADAV CONSTRUCTION COMPANY

veer enterprises