Providing and Installing New Tubewell 150mm id upto 70 mtr depth with Direct Rotary Rig Any Method Pumping Machinery OHSR 25000 ltr etc at Tikka Ladheti Block Dhar Kalan Distt Pathankot Under Kandi Area PM-21

Amount

Existing perculation well for village Tikka Ladheti and Tikka Bassa

PUMPING MACHINERY Providing & Installing Testing & Commissioning of one No. Electrically driven Submersible Pumping set of reputed make capable of delivering50 LPM against a head of 115 mtr head along-with electric panel board consisting of electric appliandiv.gsp such as automatic Starter, Main Switch. Volt Meter, Ampere Meter, ELCB, Shunt Capacitor, Single Phase Preventer, Indicating Lamps, MVB/MCCBs etc. including G.I. Column Pipe of suitable size 6 m (in 3 m Lengths each with flanges, screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable (of reputed make) complete in all respects. As per ISI 1239-2004

Rate of Motor with Pump

Panel Board

Submersible cable Size 4.00mm2

Column Pipe (G.I) 65 mm i/d

RCC OHSR Construction of one No. RCC OHSR 25000 Ltrs capacity having height of 17.20 m up to FSL and 15.50 mtr from formation level complete with external RCC stair case with landing slabs at each staging RCC roof, ventilator single main hole cover lightening conductor etc. complete as described in schedule No.3. Providing and fixing D.I. K-9 D/F expansion joints latest bell mouth and D/F puddle collars as per DWSS design on basis of enclosed drawing. Duck foot bends, Conforming to ISI - 13382 and C.I/D.I. D/F sluice Valve duly ISI marked (IS-14846-2000 or latest) one each with inlet, outlet and scour pipes, including providing and installing inlet, outlet scour pipe and overflow DI double flanged pressure pipes DI K-9 horizontally cast in sand moulds as per IS 8329-2000 and latest duly ISI marked from bottom dome to duck foot bend and further up to 2.75 mtr as per detail specification. TMT steel & painting of all complete shall be included in cost & P/F aluminium leader inside the OHSR complete in all respect as per specifications. (The specifications & drawing are based on safe bearing capacity of soil of is less than 8.75 tone per sqm. In case the safe bearing capacity of sail is less than 8.75 tone per Sqm. The contractor shall submit his own design for foundation portion based on actual safe bearing capacity as per DWSS specifications. The difference in quantities from the standard drawing based on 8.75 tone per sqm safe bearing capacity will be paid as per CSR+ Prevailing Ceiling Preminum including providing and fixing automatic Electronic Water Level control Device and Construction of Plinth protection around OHSR with masonry toe wall with 40 mm thick CC 1:2:4 on top over 100 mm thick CC 1:8:16 & inside earth filling within lead of 5 km, including overflow scower haudi complete in all respects.

G.I. RISING MAIN Providing, laying, jointing, fixing & testing of GI Pipe and specials Class-B including cost of material, complete in all respects including excavation and all taxes as per DWSS approved analysis of rates. (CSR-28.36 )

G.I. Pipe 65 mm i/d (JCB excavation 40% heavy gravel)

Distribution System

G.I. Pipe 80 mm i/d JCB excavation 40% heavy gravel)

Sluice Valve & Sluice Valve Chambers Providing & fixing C.I D/F Sluice Valves ISI marked 14846-2000, including cost of tail piece, rubber joint, gland dori, Nuts, bolts & accessories, complete in all respects

80 mm Nominal Bore (N.B.)

Construction of brick masonry sluice valve chamber size 0.90m x 0.90m as per DWSS standard Drawing & Analysis.

New Tubewell Tikka Sukhnial, Narianpur & Tikka Khukhial

Drilling of 500 mm dia bore with Direct Rotary Rig/Any Method 150 mm i/d upto 70 mtr depth in all kinds of soil including the cost of consumable stores, fuel oil and transportation of rig to the site. complete in all respect Drilling of 500 mm dia bore with Direct Rotatry Rig Beyond 300 m depth up to onward depth. (150mm i/d tubewell depth 70 mtr)

1. Erection and dismantling of boring plant including all arrangement for the transportation of the boring equipment to site of work from the store of contractor at site and back are to be made by the contractor at his own cost. All rates should be quoted for supplying the material at site of work. Pits for collection of water and water for drilling tubewell to be arranged by the firm/contractor at site at his own cost.

2. In case the bore is converted into a tubewell payment of bore shall be made up to the bail plug plus margin (7% of main bore drilling or as actual as per field requirement whichever is less) required for sustaining the main bore paid at the rate of beyond margin shall be paid at the rate of test bore drilling.

Supplying and lowering of MS Pipe as per IS:4270-2001 including MS sockets having dimensions as per IS Code duly welded with MS electrode to have extra strength to lower the pipe into tubewell bore.

150mm nominal diameter (weight 21.6 Kg per meter) 5.4mm thickness

Supplying, fixing, lowering of Stainless Steel Cage type wire wound screen as per IS:8110-2000 or latest with ISI Marked dully welded with suitable grade S.S welding electrode to lower the strainer into Tubewell bore.

150mm internal diameter (slot size 0.75mm) 5.00 mm thickness (As per A & C Slip)

Supplying, fixing lowering of stainless steel socket as per IS: 8110-2000 or latest ISI Marked dully welded with suitable grade S.S welding electrode to lower the strainer into Tubewell Bore complete in all respects.

Supplying and fixing of bail plug of MS pipe complete with inverted u-hock attached to the bottom plug complete in all respects (150mm) i/d weight 21.6 kg p/m) 5.40 mm Thick.

Supplying and Fixing mild steel centering guides made out of 32mm x 6mm thick M.S. bar complete in all respects.

Supplying & Fixing of well cap having thread to fix on housing pipe complete in all respect. 150mm internal diameter

Supplying & fixing of M.S Clamp of size 150mm x 12mm made out of MS Flat 1.52m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect.

Supplying, lowering & fixing of M.S Special Socket to connect S.S. Strainer to M.S Pipe duly welded with suitable grade welding electrode complete in all respect. 150mm internal diameter

Supplying at site Wooden Box of suitable size with Lid & locking arrangement for preserving strata sample collected from the bore.

Supplying at site of gravel of 1/16" to 1/8" sizes including pouring and packing in the annular space between the pipes assembly and the bore. The gravel should be free from, dust, dirt, or the vegetable manner as per IS 4097/1967 with latest amendments (to be paid as per actual length of pipe)

Development and stabilizing of the tube well with air compressor of required capacity as directed by the engineer-in-charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.

Capacity of Air compressor 300 cfm at 250 PSI

Development and stabilizing of the tubewell with submersible pump of required capacity as directed by the engineer-in-charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge

Collection of Water sample from different strata and testing of sample from approved laboratory (Physical & chemical Analysis)

Testing of water sample for heavy metal testing from approved laboratory (Toxic material such as Arsenic, lead, mercury, pesticide etc)

Provision for Sanitary Clay seal (as per BIS Code IS 2800:2019) including sterilization of tubewell

PUMP CHAMBER Construction of Pump Chamber size 2.20mX2.20m , electric wiring as per DWSS standard design & analysis, complete in all respects.

Construction of Gravel Pit outside the Pump Chamber. (0.90m Dia.) as per standard design & drawings of public health department.

PUMPING MACHINERY Providing & Installing Testing & Commissioning of one No. Electrically driven Submersible Pumping set of reputed make capable of delivering 144 LPM against a head of 71 mtr head along-with electric panel board consisting of electric appliandiv.gsp such as automatic Starter, Main Switch. Volt Meter, Ampere Meter, ELCB, Shunt Capacitor, Single Phase Preventer, Indicating Lamps, MVB/MCCBs etc. including G.I. Column Pipe of suitable size 42 m (in 3 m Lengths each with flanges, screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable (of reputed make) complete in all respects. As per ISI 1239-2004

Rate of Motor with Pump

Panel Board

Submersible cable Size 4.00mm2

Column Pipe (G.I) 80 mm i/d

C.I.FITTING INSIDE PUMP CHAMBER Providing & Installing 100 mm dia delivery main (from Tube-well to duck foot bend including cost of C.I.D/F Pipes, D/F Sluice Valves, D/F Non Return Valve & Specials as C.I. Bends, Tail Piece Tees, Pressure gauge, Air Valve,,V notch haudi etc. inside the Pump chamber as per DWSS standard design and analysis complete in all respects. (Annexure-3) As per IS1536-2001 & 1538-1993 reaffirmed 1999 and electro steel Casting/Kesoram pipe make).

Disinfection Unit: Providing Installing testing and commissioning and one no. electronically actuated, diaphragm operated, metering system, chemical dosing chlorinator, suitable for delivering 0.5 to 6 leter of bleaching powder solution/ sodium hypo solution per hrs under maximum deliver pressure upto 7kg/cm2 and suction left not less than 1.5 meter. (Milton roy or Equivalent make)

M.S RISING MAIN Providing, laying, fixing and testing M.S. pipe lines as per IS-1239 and specials such as tees, bends, sockets, elbows etc. in trenches in the ground including cutting, threading and testing etc. complete.

M.S Pipe 100 mm i/d (Manual excavation 40% heavy gravel)

Sluice Valve & Sluice Valve Chambers Providing & fixing C.I D/F Sluice Valves ISI marked 14846-2000, including cost of tail piece, rubber joint, gland dori, Nuts, bolts & accessories, complete in all respects

100 mm Nominal Bore (N.B.)

Construction of brick masonry sluice valve chamber size 0.90m x 0.90m as per DWSS standard Drawing & Analysis.