PROVN OF COVERED ACCN FOR SPL VEH OF TFF, 3XBICYCLE CUM SCOOTER STAND AND MINOR WORKS AT CERTAIN UNITS UNDER AGE B/R-I OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A' PART-I (B/R WORKS)

Surface dressing n exc 15 cm deep in soft/ loose soil complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exc 1.50 mtr wide and not exc 1.5 mtr deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc and getting out in loose/soft soil complete all as specified and directed.

Excavation over areas not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.

All as per Item no 4.00 here in before but exceeding 1.5 mtr not exceeding 3.0 mtr deep complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance exc 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Removing excavated material (soil) to a distance exc 250m but n.exc. 500m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in foundation of pole, stay, filling & mass concrete complete including formwork if required all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in surface channels and drains including formwork complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate in lintel upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs, fixing of hold fast and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified.

M&L for Fly ash brick work with old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Fly ash brick work with old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for Fly ash brick work with old size bricks, straight or curved on plan to any radius half brick thick honey comb walling built in In cement mortar 1:4 complete all as specified and directed.

Use & Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick in rough finish of concrete surface etc., complete all as specified and directed.

Use & Waste of formwork to chullah hoods, chajjas, troughs and similar items including edges, rough finished surface of concrete complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M&L for Reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc., basement slabs, under-reamed piles and mass concrete etc all as specified and directed.

M&L Reinforced cement concrete M-25 (Design mix) using 20 mm graded crushed stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L Reinforced cement concrete M-25 (Design mix) using 20 mm graded crushed stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L Reinforced cement concrete M-25 (Design mix) using 20 mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L Reinforced cement concrete M-25 (Design mix) using 20 mm graded crushed stone aggregate in chajjas and in shelves and the like complete all as specified and directed.

M&L for broken bricks loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed.

M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No. 30.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed.

M&L for TMT bars (Fe-500/ Fe-550D) 8mm dia, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F roof trusses (farmed), trusses purlins, crane gantries, rails and fastenings and heavy bracket framing MS angle as in truss, purlin, rafters, post etc fixed with and including angle cleat, MS plate etc including necessary welding, fittings etc Fe-410-W (Gde-E-250 quality-A) complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F PVC False ceiling of size 600mmX600mmX5mm thick (±0.25) plain PVC sheet of 600 Kg/Cum density manufactured by an ISO-9000 certified company, used as a panel insert in a frame work made using anodized aluminum powder coated T-section of size 25mmX25mm of 19 gauge or 1mm thick in square pattern of grid size 6000mmX600mm. The aluminum frame work is supported from the ceiling with the help of J Hook or 4 mm GI wire/6mm MS rods of required size to maintain the proper levels etc. The aluminum frame work is supported on side wall with the use of aluminum L section of size 25mmX25mm of 19 gauge or 1mm thick angles etc. complete all as specified and directed.

S&F Pre-painted coloured trapezoidal profiled galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof covering/cladding to wall fixed with self tapping screws(12-14 x 55 with EPDM seals) complete all as specified and directed.

S&F Pre-painted coloured plain galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as roof ridge, hips,velley gutter, drip and straight flashing (length and girth as fixed) fixed with self tapping screws(12-14 x 55 with EPDM seals) complete all as specified and directed.

M&L for hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder complete all as specified and directed.

M&L for hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken bricks or bats complete all as specified and directed.

M&L for sand filling under floor or in foundations in layes n. exc 25 cm thick including watering and consolidation all as specified and directed.

M&L 150mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as insub base of floor complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as insub base of floor complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in flooring, finshed even and smooth without using extra cement complete all as specified and directed.

M&L 100mm thick PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in flooring, finshed even and smooth without using extra cement complete all as specified and directed.

M&L for forming contraction (Dummy) joint 65mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and directed.

M&L for forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and directed.

M&L 38mm vide aluminium dividing strips, 3mm thick, inserted in position, conform to design complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protections, finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3.0 m c/c filled with mastic mortar complete all as specified and directed.

M&L for cement concrete chequred tile of approved quality size 300X300X 25mm thick on floors, footpath etc., over and including 20 mm thick screed bed CM 1:6 set and jointed in neat cement slurry and pointed with colour to match th tiles complete all as specified and directed.

M&L precast PCC 1:2:4 type B1 using 20mm graded aggregates for precast cement conc slabs as in manhole covers set in cement mortar 1:4 including formwork if required complete all as specified and directed. (Note : Precast man hole covers shall be casted on platform as approved by GE, and curing shall be carried out in water tank continously for 14 days, the cost of temp tank and plat form is deemed to be included in this item )

M&L for granite (of any type) stone slab 15 to 16mm thick (table rubbed and polished), in floor over 20mm thick screed in cement mortar (1:6) jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including etc complete all as specified and directed.

M&L for granite (of any type) stone slab 16 to 18mm thick (table rubbed and polished), in skirting, Kitchen platform /dado etc laid over over 15mm thick screed in cement mortar (1:6) jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including etc complete all as specified and directed.

M&L for Rendering 15 mm thick on other than fair faces of brick work or concrete surface in cement mortar (1:4) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15 mm thick on other than fair faces of brick work or concrete surface in cement mortar (1:6) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for Rendering 20mm thickin two layers (10+10mm) externally on fair faces of brick or concrete surfaces in cement mortar 1:4 with water proofing compund in top layerof 10mm thick as per manufacurer's instructions, finished surfaces fair and smooth without using extra cement complete all as specified and directed. (Note: - WPC shall be measured and paid separately under relevent items.)

M&L for Rendering 15mm thickin two layers (10+5mm) externally on fair faces of brick or concrete surfaces in cement mortar 1:4 with water proofing compund in top layerof 5mm thick as per manufacurer's instructions, finished surfaces fair and smooth without using extra cement complete all as specified and directed. (Note: - WPC shall be measured and paid separately under relevent items.)

Supply only integral water proofing compound liquid grade conforming to IS-2645 complete all as specified and as directed. (Pidiproof of Dr.fixit or equivalent)

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar (1:3) surface finished even & smooth without using extra cement complete all as specified and directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 4.00 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F for Steel window with side hung shutters including hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

ditto all as per item no 64.00 above but without glazing bars complete all as specified and directed.

S&F in steel ventilator with top hung shutter including hinges steel peg staycomplete all as specified and directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F 1.25mm thick pressed steel frame door 125 X 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F of 35mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class HW glazed and skeleton 30mm thick door shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sites of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (b) complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over one coat of 1mm wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper white or tint over one coat of 1mm wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint complete all as specified and directed.

S&F 100 mm dia cast iron (sand cast) soil waste and vent pipes in any length fixed with cement joints laid in trenches or in floor complete all as specified and directed.

S&F 100 mm dia cast iron (sand cast) soil waste and vent pipes in any length fixed with cement joints fixed to wall complete all as specified and directed.

S&F cast iron bend (Sand cast) of any radius with oval access door including jointing with cement joints for (100 mm bore) complete all as specified and directed.

S&F cast iron vent cowl bore of pipe 100mm, complete all as specified.

S&F galvanised steel water tubing, 'medium grade' ISI marked galvanised 15mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked, 25mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Cutting into existing manhole for connecting new drain pipe of 100 mm bore and making good to pipe and rendering disturbed surface where drain pipe have been insereted cutting out existing benching for forming branch channel (1/2 round or 3/4 section as required) in cement concrete 1:2:4 type B1 and finished the surface even and smooth and reforming benching as required complete all as specified and directed.

M&L for Salt glazed stone ware (SGSW) drain pipes laid in trenches and jointed as specified in 150mm internal dia of pipe grade 'A' complete all as specified and directed.

M&L for Plain cement concrete 1:4:8 type D-2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified and directed.

M&L Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles n. exc 5 kg complete all as specified and directed.

SCHEDULE 'A' PART-II (E/M WORKS)

M&L for point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including PVC casing & caping (double lock) of suitable size with all necessary fittings, terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc for One light point or one fan point /lightpoint/ bell point controlled by one switch

Ditto all as per item No. 88.00 here-in-before but One 3 pin socket outlet, 5 Amp independent

Ditto all as per item No. 88.00 here-in-before but One 3 pin socket outlet, 5 Amp on the same board with other switches

M&L for point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 2.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 2.5 sqmm size through and including PVC casing & caping (double lock) of suitable size with all necessary fittings, terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mm x 300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of one 15 Amp switches-sockets outlet independent complete all as specified and directed.

S&F switch socket outlet combination 3 pin 5/6 amp, flush piano unoversal type controlled by one switch conforming to IS complete all as specified and as directed.

S&F switch socket outlet combination 6 pin 5/15 amp, flush piano unoversal type controlled by one switch conforming to IS complete all as specified and as directed.

S&F Switch piano, flush button type, single pole, one way 5Amp, 230 volt complete all as specified and directed.

S&F ceiling rose surface bakelite three terminals complete all as specified and directed.

S&F ceiling fan regulator electronic stepping type, SP 230 volts, suitabe for 1200mm / 1400mm sweep ceiling fan inliding necessary electric connection complete all as specified and directed.

S&F ceiling fan 3 star 1200 mm sweep 230 V SP including Fan regulator electronic step type not less than 100 watt complete with accessories and connection with ceiling rose with MS hooke made out of ms flat iron size 25 X 5 mm for hanging of suitable length complete all as specified and as directed.(Make Crompton/ Havells/ Bajjaj/ Philips/Polar)

S&F wall mounted hi-flow and heavy duty fan 400 mm sweep 230 V SP including and connection with ceiling rose with MS hooke made out of ms flat iron size 25 X 5 mm for hanging of suitable length complete all as specified and as directed. (Make Crompton/ Havells/ Bajjaj/ Philips/Polar)

S&F LED Neo tube light fitting 1x 18W, 230 V, with tube 4 feet wall mounted LED batten ultra bright LED polycarbonate tubelight with very high efficency suitedfor installation existing T8 tubelight with G13 lamp holders to give glare free light complete all as specified and as directed. (Make Crompton/ Havells/ Bajjaj/ Philips)

S & F Building security LED light luminaire fitting 1X15 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 32 mm GI bracket medium grade 1m long bent to shape including bolt, nut,washer,clam made out of MS flat of size 50X6mm, 4 nos Anchor Bolt of suitable size etc all as specified and as directed. Make : CG MODEL LST 20 CDL/ SURYA MODEL SLE UL 20 W IP66 LXN.

S&F Sheet metal enclosure for MCB, DBs, phosphatised, power coated, single door single pole & Neutral 4 way 240 volt with 200 Amps bus bar at incoming end complete all as specified and directed.

S&F MCB SPN 20 to 40Amps, breaking capacity 10KA, 240 Volts 'C' curve all as specified and directed.

S&F MCB single pole 06 to 32Amps, breaking capacity 10KA, 240 Volts 'C' curve, cat No 408587-95 of make Legrand or equivelent model of L&T/C&S/INDOASIAN all as specified and directed.

SRI A B SEN

NEO BUILDERS

J T ENTERPRISE

M/S Joy Construction

NIRMAN INDIA

Paritosh Saha

NAYAK BROTHERS