REPAIR MAINT REPLACEMENT OF AC DC SHORE SUPPLY NETWORK INCLUDING SWITCH GEAR LIGHTENING PROTECTION INCLUDING EARTHING AND OTHER CONNECTED ACCESSORIES AT ND MUMBAI AND FACADE LIGHTING FLAME PROOF LIGHTING BLDG STREET LIGHTS AND CONNECTED ITEMS OF WORK

Amount

Supply, fabrication, installation, testing & commissioning of factory fabricated Feeder pillar box for looping of cables , indoor type, dust and vermin proof, made out of 3.15 mm thick CRCA sheet, front & back openable doors having vertical copper bus bar of capacity 2500 Amps for phases and for neutral including powder coating of approved shade over one coat of red oxide primer, 150 mm thick PCC1:2:4 type B1 using 20mm graded stone aggregate with 100 mm offsets in foundation, including 1250Amps MCCB 4pole 36kA,supporting channels,cable termination,cable gland including internal wiring with suitable size copper conductor cable and locking arrangement at jetty/casin including taking down old feeder pillar box complete all as directed as specified and directed by the Engr-in-charge

Supply, fabrication, installation, testing & commissioning of factory fabricated Feeder pillar box for looping of cables , indoor type, dust and vermin proof, made out of 3.15 mm thick CRCA sheet, front & back openable doors having vertical copper bus bar of capacity 800 Amps for phases and for neutral including powder coating of approved shade over one coat of red oxide primer, 150 mm thick PCC1:2:4 type B1 using 20mm graded stone aggregate with 100 mm offsets in foundation, including 800Amps MCCB AC/DC 4pole 36 kA ,supporting channels,cable termination,cable gland including internal wiring with suitable size copper conductor cable and locking arrangement at jetty/casin including taking down old feeder pillar box complete all as directed as specified and directed by the Engr-in-charge

Supply & fixing in repair double door type vertical type TPN DB 8 Way ,240V with 200A copper busbar , with metallic double door type IP 43 IK 09 protection suitable for housing MCCB's complete all as specified and directed by Engr-in-Charge. Note : DBs shall be concealed in wall where ever possible including making good the surface to match with surrounding.

Supply & fixing in repair double door type SPN DB 08 Way ,240V with 100A copper bus bar each phase , with metallic double door type IP-43 IK 09 protection suitable for housing MCB's complete all as specified and directed by Engr-in-Charge. Specifications Note : MCB DBs shall be concealed in wall where ever possible including making good the surface to match with surrounding.

Supply & fixing MCCB FP 125 Amps,16kA rupturing capacity, complete all as directed as specified and directed by the Engr-in-charge.

Supply & fixing MCCB FP 400 Amps,25kA rupturing capacity, complete all as specified and directed by Engr-in-Charge.

Supply & fixing MCCB FP 800 Amps,50 kA rupturing capacity, complete all as specified and directed by Engr-in-Charge.

Supply & fixing MCCB FP 1250 Amps,50 kA rupturing capacity, complete all as specified and directed by Engr-in-Charge.

Supply & fixing MCCB FP 1000 Amps,50 kA rupturing capacity, complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repairs MCB 6 to 32 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 kA including making connection complete all as specified and directed by Engr-in-Charge.

Supply & fixing MCB SPN 63 Amps,10kA rupturing capacity, 'C' series 240V complete all as specified and directed by Engr-in-Charge.

Supply & fixing MCB SPN 40 Amps,10kA rupturing capacity, 'C' series 240V complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repairs 0.71mm thick powder coated aluminium sheet cover, alloy 31000 H4 in ridges, Hips valley gutter including suitable size of rivets/nuts bolts including bending, shaping, drilling, cutting, notching complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair wall/surface mounted 10W LED batten fitting engineering plastic batten with white acrylic cover complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round/square block-02 Nos including connecting up with twin core copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair wall/surface mounted 20W LED batten fitting engineering plastic batten with white acrylic cover complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round/square block-02 Nos including connecting up with twin core copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repair 4 feet, 20W LED tube rod having high quality cross linking glass material T8 retrofit type complete all as specified and directed by Engr-in-Charge.

Supply and fixing heat shrinkable jointing STRAIGHT THROUGH JOINT KIT complete for 1100V grade cable XLPE armoured aluminium conductor cable of size 120 to 185 sqmm 3.5 core complete all as specified and directed by Engr-in-Charge.

Supply and fixing heat shrinkable jointing STRAIGHT THROUGH JOINT KIT for 1100V grade cable XLPE armoured aluminium conductor cable of size 240 to 400 sqmm 3.5 core complete all as specified and directed by Engr-in-Charge.

Supply and fixing heat shrinkable jointing STRAIGHT THROUGH JOINT KIT for 1100V grade cable XLPE armoured aluminium conductor cable of size 95 to 120 sqmm 3.5 core complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A C curve complete all as specified and directed by Engr-in-Charge.

Supply and laying in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded copper conductor of size 240sq mm 3.5 core. laid in trench/ duct / along pole/wall etc including making connection complete all as specified and directed by Engr-in-Charge. Note : The cost of thimbles/lugs and cable gland shall be included in quoted rate and no extra payment will be made for it.

Excavating in trenches n exc 1.5m wide and n exc 1.5 m in depth for laying of cables and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge.

Returing filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed by Engr-in-Charge.

Removing excavated material n exc 50 mtr and deposting where directed at a level n exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.

Material & labour for GI pipe light grade 100mm bore for protection of UG cable crossing of nalha/bridge/road etc complete all as specified and directed by Engr-in-Charge.

Supply and laying in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 sqmm 3.5 core. laid in trenches/ duct / along pole/wall etc including making connection complete all as specified and directed by Engr-in-Charge. Note : The cost of thimbles/lugs and cable gland shall deemed to be included in quoted rate and no extra payment will be made for it.

Supply and laying in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sqmm 3.5 core. laid in trenches/ duct / along pole/wall etc including making connection complete all as specified and directed by Engr-in-Charge. Note : The cost of thimbles/lugs and cable gland shall deemed to be included in quoted rate and no extra payment will be made for it.

Supply and laying in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5 core. laid in trench/ duct / along pole/wall etc including making connection complete all as specified and directed by Engr-in-Charge. Note : The cost of thimbles/lugs and cable gland shall be included in quoted rate and no extra payment will be made for it.

Supply and laying in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core. laid in trenches/ duct / along pole/wall etc including making connection complete all as specified and directed by Engr-in-Charge. Note : The cost of thimbles/lugs and cable gland shall deemed to be included in quoted rate and no extra payment will be made for it.

Supply and laying in repair cable P.V.C. insulated unsheathed bright annealed bare copper conductor single core industrial cables & PVC insulated, PVC round sheathed multicore industrial Cables 240 Sqmm for voltage grade upto 1100 Volts conforming to IS 694:1990. including making connection complete all as specified and directed by Engr-in-Charge. Note : The cost of thimbles/lugs and cable gland shall deemed to be included in quoted rate and no extra payment will be made for it.

Supply and laying in repair cable P.V.C. insulated unsheathed bright annealed bare copper conductor Four core industrial cables & PVC insulated, PVC round sheathed multicore industrial Cables 70 Sqmm for voltage grade upto 1100 Volts as per IS 694:1990. including making connection complete all as specified and directed by Engr-in-Charge. Note : The cost of thimbles/lugs and cable gland shall deemed to be included in quoted rate and no extra payment will be made for it.

Supply & fixing in repair of double door type vertical type TPN DB 12 Way ,240V with 100A copper busbar , double door type IK 09 protection suitable for housing MCCB's complete all as specified and directed by Engr-in-Charge. Note : DBs shall be concealed in wall where ever possible including making good the surface to match with surrounding.

Supply , fixing, testing in repairs of JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 25 mm dia with 250 micron ( avera Schneider ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF Powerfill Loresco compound shall be supplied in 50 Pound Bag. ( 1 Bag of 50 Pounds required per earthing set). Back-fill compound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth termination clamp should also be supplied along with the set alongwith earth pit weatherproof incl complete all as specified and directed by Engr-in-Charge. Note - Back-fill compund shall not be mixed with any soil while pouring in the bore hole.

Supply & fixing galvanised iron strip 25 x 4 mm main earthing lead fixed to wall with clamps or recess or croses or buried in ground or drawn in conduits/pipe or fixed to poles or any other indicated situation for loop earthing as required complete all as specified and directed by Engr-in-Charge.

Taking down carefully old unserviceable point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, ceiling roses, lamp holders, brackets & other fitting & Fixtures connected, and making good disturbed surfaces as per existing complete all as specified and directed by Engr-in-Charge.

Taking down old unserviceable tube light fittings single / Twin ,Recessis mount fitting , etc and making good the distrubed surface matching with existing surface complete all as specified and directed by Engr-in-Charge.

Taking down old unserviceable MCB DBs complete with MCBs, isolator etc of any type and capacity from wall/ceiling etc & making good to the disturb surfaces complete all as specified and directed by Engr-in-Charge.

Material and labour for point wiring using PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metallic double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etc fixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 1.5sqmm, 1100 volts, ISI marked, FRLS grade as earth continuty conductor connected to common earth dolly with and including modular box with cover plate and frame of any module complete for the following complete all as specified and directed by Engr-in-charge. Note: Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green

One light point controlled by one 5A switch

One Fan point controlled by one 5A switch

One 5A flush type switch socket point on same board

One 5A flush type switch socket on independent board

One bell point controlled by one bell push

Material and labour for point wiring in Work station for computer complete using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metallic double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etc fixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade as earth continuty conductor connected to common earth dolly with and including modular box with cover plate and frame in any module complete with necessary electric connection for each workstation point comprising of 03 Nos 6A sockets and 01 No 15A socket on same board complete all as specified and directed by Engr-in-charge. Note: Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green

Supply & fixing in repairs modular switch 1 way 6A, 1 module complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repairs modular switch 1 way 16A, 1 module complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repairs modular socket, 6A - 2/3 pin combined 2 modules complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repairs modular socket 6/16A,2/3 pin, combined 2 module complete all as specified and directed by Engr-in-Charge.

Supply & fixing modular fan regulator electronic step type, 120W - 2 modular complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repairs Ceiling rose, PVC/polycarbonate insulated body type, 3 terminal, 240 volts, 5 Amps complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repairs MCB 40 to 63 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 kA including making connection complete all as specified and directed by Engr-in-Charge

Supply & fixing in repairs MCB 40 to 63 Amps capacity, C Curve type suitable for 240 volts AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 kA including making connection complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repairs MCB 40 to 63 Amps capacity, C Curve type suitable for 240 volts AC supply,TP with over load and short circuit protection and rupturing capacity not less than 10 kA including making connection complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repairs MCB 40 to 63 Amps capacity, C Curve type suitable for 240 volts AC supply,FP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed.

Supply & fixing in repair Distribution Board double door, prewired type, made out of CRCA steel sheet surface with insulated material like polyester or with epoxy powder coating and IP IP 54 protection surface mounting SPN 16 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for installing MCB’s and isolators complete all as specified and directed by Engr-in-Charge. Note : The cost of removing old wooden box and making good of disturbed surface i.e. brick work, plastering, painting etc shall be included in quated rate.

Supply & fixing in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for installing MCB’s and isolators etc complete all as specified and directed by Engr-in-Charge. Note : The cost of removing old wooden box and making good of disturbed surface i.e. brick work, plastering, painting etc shall be included in quated rate.

Supply & fixing in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for installing MCB’s and isolators etc complete all as specified and directed by Engr-in-Charge. Note : The cost of removing old wooden box and making good of disturbed surface i.e. brick work, plastering, painting etc shall be included in quated rate.

Supply & fixing in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting TPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for installing MCB’s and isolators etc complete all as specified and directed by Engr-in-Charge. Note : The cost of removing old wooden box and making good of disturbed surface i.e. brick work, plastering, painting etc shall be included in quated rate.

Supply & fixing in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting TPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for installing MCB’s and isolators etc complete all as specified and directed by Engr-in-Charge. Note : The cost of removing old wooden box and making good of disturbed surface i.e. brick work, plastering, painting etc shall be included in quated rate.

Supply & fixing in repair 20 Watt 4 FT LED tube light fitting indooor , decorative aluminium extruded T5 LED Batten-integrated type complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repair 10 Watt 2FT LED tube light fitting indooor light decorative aluminium extruded T5 LED Batten-integrated type complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repair Ceiling light 36 WATT-2ft X 2 ft Recess mounting led ultra slimceiling light with extruded aluminium housing and milky diffuser.LED ultra slim panel complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repair Ceiling light 36 WATT-2ft X 2 ft backlite panel,surface mounting powder coated with CRCA full glow LED panelas complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repair 32 mm bore, light grade, GI pipe bracket 1.2 mtr long, bend to shape including clamps made out of 50 x 6 mm flat iron of suitable size with nuts, bolts and washers duly painted with two coats of aluminium paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repair of JEF Nimbus Early Streamer emission Air terminal (ESEAT) complete all as specified and directed by Engr-in-Charge. ESEAT shall have a corrosion resistant stainless steel body (AISI 316 grade) capable of working in hazardous atmosphere. The Air terminal shall be non-radioactive and require no special licensing. The unit shall be fully autonomous (no battery, no external power supply required ), collect energy from ambient electric field. ESEAT model must be tested in a high voltage laboratory in accordance with NFC 17 102 for a series of 100 shock waves equal to 325µs in order to measure the average gain in triggering. The average gain in triggering time (ΔT) obtained during the lab test for the offered model must be mentioned in the test report.

ESEAT must work on negative as well as positively polarized discharges. ESEAT must have been tested for such discharges by a reputed Indian Laboratory like Central Power Research Institute (CPRI). A dedicated tester should be available to test the healthiness of the ESEAT on request ( Courtesy : Page No. 37, Point No. 3 of Clause 8.6 of the Revised NFC 17-102 version 2011 ). ESEAT Model : NLP 2200 - Radius of protection = 30 Mtrs Level of protection considered for the project = Level I.

Supply & fixing in repair Standard / Side mounting / Special Mounting Structure of GI + Aluminium of height 4.5 Mtrs with base plate suitable for roof mounting on concrete base and with FRP adapter without GUY kit complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repair Down conductor made of Copper / GI for lower impedance. It should have a minimum cross sectional area of 50mm² single core or equivalent size of GI strip and comply with IEC 62 305 standard. The down conductor shall be routed as directly as possible to the ground avoiding electrical shafts and sharp bends (minimum bending radius of 0,5m). Any metallic object located less than 1 meter shall be connected to it complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair test link box in order to disconnect the earth termination system for enabling measurements complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repair 4 Digit electromechanical Lightning Event Counter in WEATHER PROOF ENCLOSURE. The counter should give the number of strikes intercepted by the lightning arrester complete all as specified and directed by Engr-in-Charge.

Supply of JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 32 mm dia with 250 micron ( average ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF ECO SAFE compound shall be supplied in 50 Pound Bag. ( 1 Bag required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set incl Supply of Eco Friendly weather proof High Density Polyethylene Earth Pit Chamber complete all as specified and directed by Engr-in-Charge. Note : Back-fill compund shall not be mixed with any soil while pouring in the bore hole.

S&F in repairs point wiring complete with 1.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductor cable 1100 volts FRLS grade ISI marked drawn through & including stove enamelled steel conduit with Accessories fixed on wall/ceiling/truss etc with metallic terminal boxes surfacing on wall including one PVC insulated & unsheathed multistranded copper conductor 1.5 Sqmm 1100 volts FRLS grade ISI marked as earth continuity conductor connected to common earth dolly for for the following. :-

One light point controlled by one 5A switch

One fan point controlled by one 5A switch

One Bell point controlled by one bell push

One 5pin 15 Amp flush type switch socket on independent board

Supply & fixing in replacement of Bell push, 5/6 Amps, 240 volts SP complete all as specified and directed by Engr-in-Charge.

Supply & fixing in replacement of bell, DINGDONG type, 6 Amps, 240 volts, SP complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repair flame proof rotary switch 16A with termination box LM6 single pole, 250V complete all as specified and directed by Engr-in-Charge.

Supply & fixing 18/20/24 Watt 2 FT of colour white, warm white, orange, green, surface and wall mounted outdoor type IP67 , façade light with aluminium/ CI body & integrated electronic driver with all accessories complete all as specified and directed by Engr-in-Charge.

Supply & fixing 30/36/48 Watt 4 FT of color white, warm white, orange, green, surface and wall mounted outdoor type IP67 , façade light with aluminium/ CI body & integrated electronic driver with all accessories complete all as specified and directed by Engr-in-Charge.

Supply & fixing150 Watt LED Highbay/Mediumbay LED IP65 luminaire with high efficiancy with all acessories and fixing arrangement complete all as specified and directed by Engr-in-Charge.

Supply & fixing 200 Watt LED Highbay/Mediumbay LED IP65 luminaire with high efficacy with all acessories and fixing arrangement complete all as specified and directed by Engr-in-Charge.

Supply & fixing 200 Watt LED die-cast aluminium non integral IP66 highbay light fitting , suitable for high mast application, highlighting architectural facade and general purpose lighting with all acessories complete all as specified and directed by Engr-in-Charge.

Supply & fixing 60 Watt LED light fitting made up of pressure die cast aluminium housing with all acessories complete all as specified and directed by Engr-in-Charge.

Supply & fixing 90 Watt LED light fitting made up of pressure die cast aluminium housing with all acessories complete all as specified and directed by Engr-in-Charge.

Supply & fixing 40 Watt LED industrial light fitting IP65 luminaire with high efficacy with all acessories and fixing arrangement complete all as specified and directed by Engr-in-Charge.

Supply & fixing 18 Watt LED flame proof light fitting IP65 luminaire complete with all acessories and fixing arrangement complete all as specified and directed by Engr-in-Charge.

Supply & fixing 2X20 Watt LED flame proof light fitting IP65 luminaire omplete with all acessories and fixing arrangement complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified and directed by Engr-in-Charge. (Note : The cost of removing old wooden box and making good disturbed surface i.e. brick work, plastering, panting etc is included in quoted rate)

Supply & fixing MCCB, 415 volts, four pole of cap 100 Amps, 25 KA, ICS = 100% ICU, with fixed Thermal - Magnetic setting including spreader terminal/ thimble of suitable size and making connections complete all as specified and directed by Engr-in-Charge.

Supply & fixing in replairs 20 Amps Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repairs MCB 6 to 32 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 kA including making connection complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repairs MCB 5 to 4 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 kA including making connection complete all as specified and directed by Engr-in-Charge.

Supply & fixing MCCB, 415 volts, four pole of cap 160 Amps, 16 KA, ICS = 100% ICU, with fixed Thermal - Magnetic setting including spreader terminal/ thimble of suitable size and making connections complete all as specified and directed by Engr-in-Charge.

Supply & fixing MCCB, 415 volts, 3 pole of cap 125 Amps, 16 KA, ICS = 100% ICU, with fixed Thermal - Magnetic setting including spreader terminal/ thimble of suitable size and making connections complete all as specified and directed by Engr-in-Charge.

Supply & fixing MCCB, 415 volts, four pole of cap 200 Amps, 25 KA, ICS = 100% ICU, with fixed Thermal - Magnetic setting including spreader terminal/ thimble of suitable size and making connections complete all as specified and directed by Engr-in-Charge.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core. laid in duct / along pole/wall tc including making connection complete all as specified and directed by Engr-in-Charge. Note : The cost of aluminium thimbles/lugs and cable gland etc shall deemed to be included in quoted rate and no extra payment will be made for it.

Material & labour for sub-main wiring with 2 runs of 4.0 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade non metallic PVC conduit not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 4.0 sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unserviceable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed by Engr-in-Charge. Note: i) Colour coding shall be followed (i) Phase- Red (ii) Neutral - Black (iii) Earth - green. ii) 2 runs of 4.0 sqmm copper conductor cable, one run of PVC conduit and one run of 4.0 sqmm copper conductor cable for earth shall be measured and paid as one unit only.

Material & labour for sub-main wiring with 2 runs of 6.0 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade non metallic PVC conduit not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 4.0 sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unserviceable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed by Engr-in-Charge. Note: i) Colour coding shall be followed (i) Phase- Red (ii) Neutral - Black (iii) Earth - green. ii) 2 runs of 6.0 sqmm copper conductor cable, one run of PVC conduit and one run of 4.0 sqmm copper conductor cable for earth shall be measured and paid as one unit only.

Material & labour for sub-main wiring with 4 runs of 10.0 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade non metallic PVC conduit not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including 2 run of 6.0 sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed by Engr-in-Charge. Note: i) Colour coding shall be followed (i) Phase- Red (ii) Neutral - Black (iii) Earth - green. ii) 4 runs of 10.0 sqmm copper conductor cable, one run of PVC conduit and two run of 6.0 sqmm copper conductor cable for earth shall be measured and paid as one unit only.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core. laid in duct / along pole/wall etc including making connection complete all as specified and directed by Engr-in-Charge. Note : The cost of aluminium thimbles/lugs and cable gland etc shall deemed to be included in quoted rate and no extra payment will be made for it.

shubham construction

AGRAWAL ASSOCIATES

Chakshu Enterprise

Shree Ayyappa Engineering

cooltech engineering services