LIFT IN GH AT GUDIYATHAM

Amount

Design, Engineering, Supply, Fabrication, Erection, Testing, commissioning and handing over of 1 no 20 Bed-Cum passenger lift as per the following.(Gearless lift with machine room) (1)Location: Govt. Hospital Gudiyatham, Vellore District, 2.No of lift: one no. (Gearless), 3.Type of lift: Bed-Cum passenger, 4.Capacity of lift: 20 persons / 1360 Kgs, 5.Speed: 0.32m / sec, 6.Type of drive: V3F drive with enhanced ride comfort and near zero level functions, 7.No of floors: GF+5Floor, 8.Total travel: 3.3 mts x 6 Landing =19.8 mts, 9.Leveling accuracy: high level accuracy with smooth and jerk free stopping, 10. Construction of CAR: No. 4 hardened sheet high quality stainless steel car and hand rail granite flooring and Perspex false ceiling, 11. Position of machine: directly above the lift well. 12. No of landing service: One in the front side- 1 no. 13. No. of car entrance: one in the front side only, 14. Car entrance door: power operated automatic V3F drive center opening sliding SS door, 15. Landing entrance door: power operated V3F drive center opening sliding SS door with provision for emergency exit key at all landings. 16.Lift well :3000 mm (wide) X 2400 mm (depth) as per IS 14665(part1) 2000 to be constructed by PWD civil wing, 17.Lift pit depth:1600 mm, 18. Car inner size: 2000 mm (width) x 1500 mm (depth) as per IS 14665 (part 1 )2000,over head 4200mm and Total weight of person – 1360 Kg, 19. Car clear opening: 1100 mm wide x 2000 mm height as per IS 14665 (part 1)2000, 20.Lift machine room size: as per ISI 14665 (part 1)2000 to be constructed by PWD civil wing over the lift well, 21. Power supply: 400 / 440 v three phase 50 Hz AC supply for power and 230 V 50 Hz single phase power supply for light. 22.Control: micro computer (micro processor):based simplex collective control with / without attendant,

23. Car fittings: CFL lighting with 1 no 300 mm sweep cabin fan, 24. Lift well: RCC construction with brick masonry to be constructed by PWD civil wing. 25. Induction: UP / DOWN digital direction and position indicator for all landings and inside the car. 26.Emergency alarm bell: battery operated bell to be provided with automatic charging device, 27.Emergency light: battery operated light to be provided with automatic charging device, 28.Fire mans switch: to be provided at the GF, 29. Minor builder works: to be provided by the lift contractor. 30. Scaffoldings: to be provided by the lift contractor. 31. Sill angles and facia plates: SS to be provided by the lift contractor. 32. Steel for lift machinery: to be provided by the lift contractor. 33.Servicing and maintenance: free comprehensive servicing and maintenance for one year Guarantee period to be provided by the lift contractor. 34. Automatic rescue device: to facilitate the landing of the nearest floor at the time of power failure this shall consist of suitable battery system with charger inverter under voltage protection system etc. complete with all accessories. 35.Provision for intercom with phone: to be provided by the lift contractor. 36.Lift license: preparation of drawings payment of charges to CEIG and insurance policy if any and obtaining CEIG approval for the lift as per lift act should be done by the lift contractor, 37. Floor position announcer: to be provided by the lift contractor. 38.Special features : (a) Infra red door sensor with full height screen, b) Full width half height rear panel mirror, c)Tubular SS hand rail in car, d) Stainless steel signal features, e) Vandal proof SS button with SS cover, f) SS door frames for landing doors, g) V3F door operator, h) Call register signal,

i) Stainless steel facia plates for car operating panel and landing fixtures, j) Steel ladder for lift machine room, k) On / off switch for fan and light, l) Over load warning indicator with audio announcer, m)Voltage stabilizer for control circuits, n)Braille button. 39.Over speed governor phase failure and phase reversal relay alarm bell T guide brackets for car and counter weight rubber padding under the winding unit motor of adequate capacity signal reduction worm gear electromagnetic brake with compression springs car safety gears buffers electro mechanical locks emergency key side supporting angles motor over load protection devices final limit switch main suspension ropes counter weight lifting joist for mounting the machineries. 40.Guarantee: guarantee at least for one year for the material and workman ship of equipments should be offered by the lift contractor. 41. Site testing in accordance with IS 14665 should be carried out at the time of handing over to the user department. 42. Supply operation and maintenance manual and necessary tools for operation and a set of Spare parts required for one year.

Design, Engineering, Supply, Fabrication, Erection, Testing, commissioning and handing over of 1 no Dump lift as per the following specifications including taxes and duties.(Gearless lift with machine room) 1.Location: Govt. Hospital Gudiyatham, Vellore District, 2.No of lift: one no. (Gearless), 3.Type of lift: Dump, 4.Capacity of lift: 240 Kgs, 5.Speed: 0.32m / sec, 6.Type of drive: V3F drive with enhanced ride comfort and near zero level functions, 7.No of floors: GF+5 Floor, 8.Total travel: 3.3 mts x 6 Landing =19.8 mts, 9.Leveling accuracy: high level accuracy with smooth and jerk free stopping, 10. Construction of CAR: No. 4 hardened sheet high quality stainless steel car and hand rail granite flooring and Perspex false ceiling, 11. Position of machine: directly above the lift well, 12. No of landing service: One in the front side- 1 no, 13. No. of car entrance: one in the front side only, 14. Car entrance door: power operated automatic V3F drive center opening sliding SS door, 15. Landing entrance door: power operated V3F drive center opening sliding SS-Bi parting door with provision for emergency exit key at all landings. 16.Lift well :1900 mm (wide) X 1870 mm (depth) as per IS 14665(part1) 2000 to be constructed by PWD civil wing, 17.Lift pit depth:1600 mm, 18. Car inner size: 1000 mm (width)x1000 mm (depth) as per IS 14665 (part 1 )2000,over head 4200mm and Total weight of person – 680 Kg, 19.Car clear opening: 900 mm wide x 900 mm height as per IS 14665 (part 1)2000, 20.Lift machine room size: as per ISI 14665 (part 1)2000 to be constructed by PWD civil wing over the lift well, 21.Power supply: 400 / 415 v three phase 50 Hz AC supply for power and 230 V 50 Hz single phase power supply for light, 22.Control: micro computer (micro processor):based simplex collective control with / without attendant,

23. Car fittings: Indirect fluorescent light and fan, 24. Lift well: RCC construction with brick masonry to be constructed by PWD civil wing. 25. Indicators: Direction indicators at all landings, 26.Emergency alarm bell: battery operated bell to be provided with automatic charging device, 27.Emergency light: battery operated light to be provided with automatic charging device, 28.Fire mans switch: to be provided at the GF, 29.Minor builder works: to be provided by the lift contractor. 30.Scaffoldings: to be provided by the lift contractor. 31. Sill angles and facia plates: SS to be provided by the lift contractor. 32. Steel for lift machinery: to be provided by the lift contractor. 33. Servicing and maintenance: free comprehensive servicing and maintenance for one year Guarantee period to be provided by the lift contractor. 34. Automatic rescue device: to facilitate the landing of the nearest floor at the time of power failure this shall consist of suitable battery system with charger inverter under voltage protection system etc. complete with all accessories. 35. Provision for intercom with phone: to be provided by the lift contractor. 36.Lift license: preparation of drawings payment of charges to CEIG and insurance policy if any and obtaining CEIG approval for the lift as per lift act should be done by the lift contractor, 37. Floor position announcer: to be provided by the lift contractor. 38.Special features: a) Infra red door sensor with full height screen, b) Full width half height rear panel mirror, c)Tubular SS hand rail in car, d) Stainless steel signal features, e) Vandal proof SS button with SS cover, f) SS door frames for landing doors, g) V3F door operator, h) Call register signal, i) Stainless steel facia plates for car operating panel and landing fixtures,

j) Steel ladder for lift machine room, k) On / off switch for fan and light, l) Over load warning indicator with audio announcer, m)Voltage stabilizer for control circuits, n)Braille button, 39.Over speed governor phase failure and phase reversal relay alarm bell T guide brackets for car and counter weight rubber padding under the winding unit motor of adequate capacity signal reduction worm gear electromagnetic brake with compression springs car safety gears buffers electro mechanical locks emergency key side supporting angles motor over load protection devices final limit switch main suspension ropes counter weight lifting joist for mounting the machineries, 40. Guarantee: guarantee at least for one year for the material and workman ship of equipments should be offered by the lift contractor. 41. Site testing in accordance with IS 14665 should be carried out at the time of handing over to the user department, 42.Supply operation and maintenance manual and necessary tools for operation and a set of Spare parts required for one year.

Supply and Extension of lift Support Channel, Lift floor doors(1 Floor), ropes and other accessories to the 26 Persons bedcum passenger lift from G+4 to G+5.

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 5 points / Coil)

Supply and fixing of single box type fluorescent type fitting with TW round block on wall or ceiling with 4'18W crystal glass LED tubelight with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of WT bulk head fitting with guard Suitable for 15W LED Bulb.

Supply and fixing of 300 mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections.

Supply and fixing of 63A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in rigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with Painting of suitable colour.

Supply and clarnping of 3-1/2 x 35 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

SURESHBABU (BID ID -1377325)

E DHANASEKARAN (BID ID -1378579)