Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.9 LAccepted-AOC | L1 | Accepted-AOC 1st Lowest | |
| 2 | L2₹51.6 L+₹4,799.61 (0.09%)Rejected-Finance | L2 | Rejected-Finance Higher bid value | |
| 3 | L3₹51.6 L+₹4,995.77 (0.10%)Rejected-Finance | L3 | Rejected-Finance Higher bid value | |
| 4 | L4₹51.6 L+₹6,502.39 (0.13%)Rejected-Finance | L4 | Rejected-Finance Higher bid value | |
| 5 | L5₹51.7 L+₹8,052.90 (0.16%)Rejected-Finance | L5 | Rejected-Finance Higher bid value |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
22 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
SPL REPAIR REPLACEMENT OF OLD UNSV RUSTED PIPELINE AT 165 MH 5003 ASC BN MT AND PROVN OF EXTERNAL ELECTRICAL AND WATER SUPPLY FOR 04 GUEST ROOM IN A MESS AT RMS
2022_MES_550735_2
8487/C/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
RANGAPAHAR
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
GE 868 EWS
₹95,000
17 Dec 2022
26 Oct 2022
24 Nov 2022
26 Oct 2022
22 Nov 2022
10 Nov 2022
26 Oct 2022 - 9 Nov 2022
Amount
Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr depth for laying of pipes and getting out in soft/loose soil.
Returning, filling , including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil all as directed.
Removal of surplus soil not exceeding 50 mtr and deposited where as directed at a level n exc 1.5m above the starting point.
Taking up CI/DI/GI water main (including all fittings), with spigot and socketed ends jointed with run lead joints including burning out lead of joints and collecting run lead for re-use, cleaning serviceable pipe internally/externally for re-use, stacking properly in safe custody in store yard of AGE E/M and removing unserviceable pipe from site complete, all as specified and directed for 150 mm dia bore pipe. (Note :-Excavation and earth work shall be measured and paid separately)
All as per item No. 4 above here-in-before but of size 100 dia mm bore
All as per item No. 4 above here-in-before but of size 80 dia mm bore.
All as per item No. 4 above here-in-before but of size 50 dia mm bore.
All as per item No. 4 above here-in-before but of size 40 dia mm bore.
All as per item No. 4 above here-in-before but of size 25 dia mm bore.
All as per item No. 4 above here-in-before but of size 20 dia mm bore.
Supply and laying Centrifugally Ductile iron pipe (Class K-9) spigot and socket end with all fittings complete in trenches all as specified & directed of following sizes:- Note : For Branch Connection fittings such as (union, Tees , bends, nipples, sockets, elbows etc), welding work and earth work as required at site will be included in the rate quoted by the contractor.
150 mm Dia
100 mm Dia
M&L for Ductile iron pipe Fittings upto 300mm bore (Class K-9) for spigot and socket or flange pipes, such as bends (any type radius and angle) Tappers (any type straight, bend, increasing, decreasing or double socket etc.), Tee pieces (any type), single branch, Y junction. double branch, cross complete all as specified and directed.
Supply and laying in trenches steel water tubes medium grade galvanised with all fittings in wall / trench complete all as specified & directed of following sizes:- Note : GI fittings such as union, Tees , bends, nipples, sockets, elbows etc or welding work as required at site will be included in the rate quoted by the contractor.
20mm dia
25 mm dia
40 mm dia
50 mm dia
80 mm dia
Supply anf fixing of gun metal gate valve Gun-metal, globe valve ,with iron wheel ead, screwed both ends for iron pipe and fixed complete incl taking down old U/s gate valves as specified & directed of following sizes:-
20 mm dia
25 mm dia
40 mm dia
50 mm dia
S & F gate valve cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron or for union and fixed fro 50 mm dia pipe complete all as specified and as directed. Make : Prayag/Zoloto/Jaguar
S & F gate valve cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron or for union and fixed fro 40 mm dia pipe complete all as specified and as directed. Make : Prayag/Zoloto/Jaguar
S & F gate valve cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron or for union and fixed fro 25 mm dia pipe complete all as specified and as directed. Make : Prayag/Zoloto/Jaguar.
Cutting/drilling existing CI pipe line 4" dia for making connention of 100 mm dia pipe complete all as specified and as directed.
Material & Labour for construction of brick masonry valve pit of internal dimension 0.9M x 0.9M x 0.9M complete with MS angle iron frame work (angle iron size 50mm x 50mm x 6mm) and 3.15 mm thick MS black sheet top cover openable through hinges of suitable size including necessary earth work, PCC, locking arrangement,rendering complete with two coats of black bituminous paint over a coat of red oxide zinc chrome primer to all iron surfaces all as specified and directed.
S&F sluice valve flanged type (PN:1.6) with brass spindle suitable for CI/DI pipe line including all jointing materials such as washers, nut bolts, rubber packing etc and testing complete all as specified ISI marked incloding taking out old sluice valve for following sizes 150 mm dia all as specified & directed.
S&F sluice valve flanged type (PN:1.6) with brass spindle suitable for CI/DI pipe line including all jointing materials such as washers, nut bolts, rubber packing etc and testing complete all as specified ISI marked incloding taking out old sluice valve for following sizes 100 mm dia all as specified & directed.
S&F sluice valve flanged type (PN:1.6) with brass spindle suitable for CI/DI pipe line including all jointing materials such as washers, nut bolts, rubber packing etc and testing complete all as specified ISI marked incloding taking out old sluice valve for following sizes 80 mm dia all as specified & directed.
M & L for PCC work 1:3:6 Type D2 (using 40mm Graded aggregate stone aggregate) as in foundation, mass concrete, sub base etc complete all as specified and directed.
M&L for boring under/cutting of existing road/cement concret/biutuminous road of size not less than 0.6m for laying of GI/CI/DI pipe & making good to the disturbed surface by providing PCC or Same material After laying of pipe line and returning filling of soil complete all as specified and directed
S&F, in replacement, rotational moulded polythene water storage tank triple /multilayer (Cylindrical vertical with closed top), incliding float valve and connected accesories and fixed in position all as specified in SSR Part-I of the following capacities
500 Ltrs capacity
750 Ltrs capacity
1000 Ltrs capacity
Supply and fixing ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe suitable for the following sizes :-
20 mm dia
25 mm dia
M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed
Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of Under ground cable including spreading and punning down to requirred thickness complete all as specified and as directed. (Note: Thickness of sand cushioning after punning down shall be measured for payment purpose)
Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 120 Sqmm 3.5 core laid in trenches or fixed to wall / pole / ceiling as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc complete all as specified and as directed. Note : Earth work, brick protection and sand cushioning and GI Pipe will be measured and paid separately under respective item.
Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 35 Sqmm 3.5 core laid in trenches or fixed to wall / pole / ceiling as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc complete all as specified and as directed. Note : Earth work, brick protection and sand cushioning and GI Pipe will be measured and paid separately under respective item.
Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of 32 x 6mm size by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 40mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking out unserviceable earthing plate and accessories all as specified and as directed. (Note: Earth strip upto a length of 7.50 m from earthplate shall be deemed to be included in quoted rate.)
Supply and fixing 40 mm bore dia GI pipe, light grade including all fittings laid under road crossings or fixed to pole complete all as specified and directed.
Supply, install, testing and commissioning of main LT Panel board, TPN 415 volts, 50 HZ out door kiosk type floor mounted CPRI approved factory made, double door dust, vermin and weather proof IP-65, fabricated out of crca sheet not less than 3.15 mm thick with 2mm thick for internal compartment duly powder coated fixed on angle iron pedestal made out of 50x50x6 mm with cable chamber for individual feeders for incomming and outgoing connentions, one set of LED indicator lamp RYB with switch and fuse and the panel board shall be provided with proper ventillation including suitable size of cable alley copper bus bar suitable for carrying of current of 200 Amps with suitable connections from MCCB out going to main bus bar shall be carried out with TPN copper bus bars of suitable rating and connections from main bus bar to out going MCCBs (intake point) will be carried out with TPN coper bus bar as per MCCB rating duly insulated and colour coded heat shrinkable sleeve and shall be rigidly mounted on suitable size of bridge insulator including necessary PCC foundation of minimum 0.35 m height positioned and fixed with suitable nut, bolts, washers etc to the MC pedestal all as specified and directed comprising of the following:- (a) MCCB 200 Amp 4 Pole 50 Hz 415 Volt with thermal magnetic relaese having rupturing capacity 16 KA-01 Nos (Incoming). (b) MCCB 63 Amps 4 Pole 50 Hz 415 V with thermal magnetic release having rupturing capacity 16 KA-04 Nos (Outgoing) For sub/distribution panel. (c) 3 Phase digital multi function meter model A, class 1.5 A with relay vega Series-01 Nos. (d) Indicating lamp 240 volts LED type-Set of three. (e) Single phase preventor (VSP-3) -01 Nos (f) On load change over of 200 Amp Capacity-01 Nos
NAGALAND AGENCIES CO
M/S BIJOYA LAXMI ENTERPRISE
M/S TAPAN KUMAR RAY
Rameshwar Prasad
SAYED ALI AND SONS
SK SINGH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .