Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹14.0 LAccepted-AOC 852 EKTA VIHAR 1 C NEAR ANAND NAGAR 9 B PATIALA 147001 | PATIALA | PATIALA | PUNJAB | 147001 | 1 | Accepted-AOC LOWEST AND REASNABLE | |
| 2 | 2₹14.3 L+₹22,050 (1.57%)Rejected-Finance 3 3430 NICHOLSON ROAD KASHMERE GATE DELHI DELHI DELHI 110002 | CENTRAL DELHI | DELHI | 110002 | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹15.7 L+₹1.7 L (12.2%)Rejected-Finance | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹16.3 L+₹2.2 L (16.0%)Rejected-Finance 21 GREEN ENCLAVE SULLAR PATIALA 147001 | PATIALA | PATIALA | PUNJAB | 147001 | 4 | Rejected-Finance NOT LOWEST | |
| 5 | 5₹16.4 L+₹2.3 L (16.6%)Rejected-Finance | 5 | Rejected-Finance NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
2 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
MAJOR ANIMESH TRIPATHI
GE NORTH PATIALA MILITARY ENGINEER SERVICES SANGRUR ROAD PATIALA CANTT
REPAIR TO JOINERY FOR OTM AND MD ACCN UNDER AGE B/R-I PATIALA
2022_MES_530297_1
GE(N)/PAT-26/2022-23
Open Tender
Civil Works
Item Rate
180 days
PATIALA
AS PER NIT
8 documents required · 8 mandatory
₹500
GE NORTH PATIALA
₹40,000
Yes
27 Aug 2022
11 Jun 2022
4 Jul 2022
11 Jun 2022
2 Jul 2022
25 Jun 2022
Amount
Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.
Taking down off shutters only any description exc 1.0 Sqm but not exceeding 2.00 sqm complete all as specified and directed.
S & F Powder coated Pressed steel frames made of MS sheet of 1.20 mm thickness of size 105mmX60mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts , PCC 1:3:6 type C-0 in filling inside frame & hold fasts etc complete all as specified and directed. ( Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item )
S & F Powder coated Pressed steel frames made of MS sheet of 1.20 mm thickness of size 125mmX60mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts , PCC 1:3:6 type C-0 in filling inside frame & hold fasts etc complete all as specified and directed. ( Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item )
S&F factory made flush shutters 35mm thick, 7 Ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with both faces are covered and including painting with one coat of pink primer and two coats of synthetic enamel paint and supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 Nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos per leaf ( Note :-Cost of butt hinge for shutter fixing with new chowkhats is included in item No 3 & 4 above . Cost of butt hinges for shutter fixing with old chowkhats is catered in this item including removal of existing damaged butt hinge .)
35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated including prepration of new wood surface ,applying two coats of synthetic enamel paint over a coat of pink primer all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.22mm) and the supply and fixing following items:- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 nos per leaf (e) 200 mm long MS rat tail pattern spring hinge including roller and roller plate - 01 No per leaf ( Note :-Cost of butt hinge for shutter fixing with new chowkhats is included in item No 3 & 4 above . Cost of butt hinges for shutter fixing with old chowkhats is catered in this item including removal of existing damaged butt hinge .)
Taking down chokhats or frames (without taking off shutters from the frame) n.exc 1.50 sqm including cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.
Powder coated aluminium glazing/ doors & shutters made out of aluminium anodised section 101.60x44.75x1.75mm for chowkats or frame & shutters made of size 81.25x38.10x1.75mm for side rails, top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) above and below middle/lock rail, and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including required nos. of pivots/hinges and brass mortice lock (four levers) and two Nos of keys including taking down existing shutter with frame complete all as specified and directed by Engr-in-Charge including supply and fixing the following items: (a) Powder Coated Aluminium Butt Hinges 100mm - 3 nos per leaf (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf ( Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item .Size of opening shall be measured for payment purpose . )
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall bw covered with heat moulded plain colour PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and botom rail on either side & as gap insert for tip rail & bottom rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing
Factory made aluminium casement windows with 80 micron powder coating doubled panelled and double shutters consisting of frame of 127X38.10X1.74 mm and shutters made of 45X45X1.63mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 32 Gauge in inner shutters complete fixed in all respect as specified including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf ( Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item )
Providing and fixing factory made extruded aluminium ventilator with 50 micron powder coating of frame 63.5X38.10x1.29 mm including 5mm thick frosted glass in lower 55% portion of shutter and stainless steel wire gauge 0.36mm dia and 1.40 aperature in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in repair/replacement all respect as specified and directed.
Factory made pre-laminated PVC solid board 18-20 mm thick prelaminated on both sides with wooden finished on one side and white finished lamination on other side as in cup-board front shutters complete fixed in position in all respect all as specified including taking down existing damaged shutter and including supply and fixing of following items :- (a) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 1 nos per leaf (b) Stainless Steel (304 Grade) Finished Handles 200 mm - 1 nos per leaf (c) Stainless Steel (304 Grade) Finished magnetic Catchers - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Hapse and staple - 1 nos (e) Continuous ( Piano Hinges30 mm l )304 Grade) Stainless Steel (304 Grade) - 1 Nos per leaf
Pre-laminated PVC solid board as in frames for cupboard shutters 40 mm thick (double sandwiched of 20mm) prelaminated on one side with wooden finished complete fixed in position in all respect including taking down existing damaged CB frame complete all as specified and directed.
S&F joist, channel, angles or Tee section, fixed independently without connecting plates etc (cut to ordinary length) i.e within 20 mm of the length indicated complete all as specified and directed.
Prepolished mirror finish kota stone slab 20 mm thick , machine cut as in shelves of CB of suitable size bull-nose the front length, set inside walls with groove and fixed with suitable adhesive including rubbing, cutting and mirror type granite polishing including removal of existing damaged sheleves complete all as specified and directed. Note : Single piece should be used in shelves.
Pressed ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. Note : Dado should be flushed with the wall plastering.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed in repair with stainless steel wire stapples, in steel/wooden frame complete all as specified and directed.
S&F of 3 mm thick plain glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane, fixed in repair complete all as specified and directed.
S&F of 3 mm thick pin headed glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane, complete all as specified and directed.
S&F 5m thick glass fixing in aluminium door/ window including gubber gaskit & beading complete all as specified and directed.
Replacement of unserviceable spring of rolling shutter with new helical wire spring or flat spiral spring of 8 SWG wire and length not less than 40cm and up to 60cm or as per existing one at site ,applying twc coats of dynthetic enamel paint to match with existing surface complete including taking down existng one all as specified and directed.
Supply and fixing gear box with handle duly painted with standard accessories including vertical rod of any dia and size same as existing at site including taking down existing one and making shutter functional complete all as specified and directed.
Replacement of existing unserviceable steel pipe shaft of 50mm dia, MS pipe medium grade including welding, drilling for securing springs with bolts, nuts etc complete all as specified and directed.
Opening out existing gear box and moving mechanism for setting right the gear box wheels, vertical rod welding (where required), replacement of worn out nuts, bolts bushes, complete oiling and greasing, set in smooth working condition and refixing the same including making good the disturbed portion of structure to match with existing one all as directed and specified.
S&F Ball bearing for rolling shutters in repair any size suitable to exesting MS pipe complete all as specified and directed.
M/s Anil Kumar and co.
DELTA CONSTRUCTION CO
Buttar Construction Co.
HARJIT CONTRACTS
SWAMI ENGINEERS
m/s panchmukhi builders
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .